9 open source boards using the BMP384

Real designs built with the BMP384, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the BMP384

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the BMP384 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDDIO_1 pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 47 µF).
  • The VDD_10 pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 47 µF).
  • The SCK_2 pin has a pull-up to 3.3V on 4 of 8 designs, most often 4.7 kΩ (then 1.2 kΩ).
  • The SDI_4 pin has a pull-up to 3.3V on 4 of 8 designs, most often 4.7 kΩ (then 1.2 kΩ).
VDDIO_1pin 1Connected to: 3.3V 100%
  • Decoupling capacitor on 88% · 100 nF (17), 47 µF (1)
SCK_2pin 2Connected to: The microcontroller 75%, MMC5983MA 38%
  • Pull-up to 3.3V on 50% · 4.7 kΩ (2), 1.2 kΩ (2)
VSS_3pin 3Connected to: GND 100%
SDI_4pin 4Connected to: The microcontroller 75%, MMC5983MA 38%
  • Pull-up to 3.3V on 50% · 4.7 kΩ (2), 1.2 kΩ (2)
VSS_8pin 8Connected to: GND 88%
VSS_9pin 9Connected to: GND 88%
VDD_10pin 10Connected to: 3.3V 100%
  • Decoupling capacitor on 88% · 100 nF (18), 47 µF (1)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Flight controller atlas by williamjroche, Raspberry Pi Compute Module 5 Drone Carrier by AMLing2, Siplab wristband by bastlfun and EdgeLink S3 Cellular by CDonohoe-Designs.

The BMP384 in open source designs

The gallery holds 9 open source boards using the BMP384 from 8 GitHub repositories; a typical one measures about 51 × 52 mm and carries around 72 components.

89% use four copper layers or more, and 56% carry an open source license.

The most starred is Flight controller atlas by williamjroche.

Parts used alongside the BMP384

Microcontrollers on boards using the BMP384

BMP384: common questions

Where can I find a BMP384 reference design?

Each of the 9 boards on this page is a real design using the BMP384. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the BMP384 VDDIO_1 pin?

The VDDIO_1 pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 47 µF). Counted from the KiCad layouts of 8 open source designs using the BMP384.

What decoupling capacitors do designs use on the BMP384 VDD_10 pin?

The VDD_10 pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 47 µF). Counted from the KiCad layouts of 8 open source designs using the BMP384.

What pull-up resistor is used on the BMP384 SCK_2 pin?

The SCK_2 pin has a pull-up to 3.3V on 4 of 8 designs, most often 4.7 kΩ (then 1.2 kΩ). Counted from the KiCad layouts of 8 open source designs using the BMP384.

Which microcontrollers do boards using the BMP384 use?

Most are built on STM32 (3), ESP32 (2), RP2040/RP2350 (2) and AVR/Arduino (1).

How big is a typical board using the BMP384?

The median is 51 × 52 mm, and 11% are two-layer designs.

What is the most popular open source board using the BMP384?

By GitHub stars, Flight controller atlas by williamjroche, with 1 stars.

Can I simulate one of these boards using the BMP384 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part