Breakout boards panelized
wszeto9·LED-Control-Board-V2·breakout_boards/breakout_boards_panelized.kicad_pcb
About the Breakout boards panelized
Breakout boards panelized is an open source ESP8266 PCB design by wszeto9, published on GitHub. It is a 2-layer board measuring 100.1 × 91.7 mm, with 55 components from 40 distinct parts.
Its main chip is the ESP-12F, from the ESP8266 family. Other key parts include the CH340C, IP2721, XC6210B332MR and MP1584EN-LF-Z. By type, the board carries 22 resistors, 11 capacitors, 7 diodes, 6 connectors, 5 ICs and 3 transistors.
It belongs with the dev boards & breakouts and iot & wireless designs in this gallery.

Main components on the Breakout boards panelized
Breakout boards panelized bill of materials (BOM)
55 components, 40 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH340C | SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | IP2721 | TSSOP-16_4.4x5mm_P0.65mm | U2 |
| 1 | XC6210B332MR | SOT-23-5 | U3 |
| 1 | MP1584EN-LF-Z | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.62x3.51mm | U4 |
| 1 | ESP-12F | ESP-12E | U6 |
| 3 | AO3400A | SOT-23 | Q1, Q2, Q3 |
| 1 | USB_C_RECEPTACLE_USB2.0 USB_C_Receptacle_USB2.0 | USB_C_Receptacle_Palconn_UTC16-G | J1 |
| 1 | USB_POWER_HEADER | PinSocket_1x08_P2.54mm_Vertical | J2 |
| 1 | USB_POWER_HEADER_2 | PinSocket_1x08_P2.54mm_Vertical | J3 |
| 1 | ANALOG RGB HEADER | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | ADDRESSIBLE RGB HEADER 1 | PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | ADDRESSIBLE RGB HEADER 2 | PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | LED_WHITE | LED_0603_1608Metric | D1 |
| 1 | LED_RED | LED_0603_1608Metric | D2 |
| 1 | LED_GREEN | LED_0603_1608Metric | D3 |
| 1 | LED_B | LED_0603_1608Metric | D4 |
| 1 | LED_G | LED_0603_1608Metric | D5 |
| 1 | LED_R | LED_0603_1608Metric | D6 |
| 1 | SS210 | D_SMA | D7 |
| 1 | 10UH 10uH | L_Taiyo-Yuden_NR-40xx | L1 |
Show 20 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1UF 1uF | C_0402_1005Metric | C1 |
| 1 | 10UF 10uF | C_0603_1608Metric | C2 |
| 1 | 1UF 100nF | C_0402_1005Metric | C3 |
| 2 | 22UF 22uF | C_0805_2012Metric | C4, C5 |
| 2 | 10UF 10uF | C_0402_1005Metric | C6, C7 |
| 2 | 100NF 100nF | C_0402_1005Metric | C8, C10 |
| 1 | 10NF 10nF | C_0402_1005Metric | C9 |
| 1 | 150pF | C_0402_1005Metric | C11 |
| 2 | 5.1K | R_0402_1005Metric | R1, R2 |
| 1 | 220 | R_0603_1608Metric | R3 |
| 5 | 10K | R_0402_1005Metric | R4, R5, R19, R20, R21 |
| 1 | 100K 20k | R_0402_1005Metric | R6 |
| 1 | 18K 3.9k | R_0402_1005Metric | R7 |
| 1 | 12K 100K | R_0402_1005Metric | R8 |
| 1 | 10K 56k | R_0402_1005Metric | R9 |
| 4 | 1K | R_0402_1005Metric | R10, R11, R12, R14 |
| 1 | 2K | R_0402_1005Metric | R13 |
| 1 | 330R | R_0402_1005Metric | R15 |
| 3 | 8.2k | R_0402_1005Metric | R16, R17, R18 |
| 1 | 100K | R_0402_1005Metric | R22 |
Breakout boards panelized design files
The KiCad project lives in the wszeto9/LED-Control-Board-V2 repository on GitHub; these links point at the commit this page was built from.
Breakout boards panelized: common questions
What microcontroller does the Breakout boards panelized use?
The Breakout boards panelized is built around the ESP-12F, from the ESP8266 family.
How big is the Breakout boards panelized?
The Breakout boards panelized measures 100.1 × 91.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Breakout boards panelized?
55 components, from 40 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Breakout boards panelized design files?
From the wszeto9/LED-Control-Board-V2 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Breakout boards panelized design in my own project?
The repository has no license, so all rights stay with wszeto9. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Breakout boards panelized without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
More boards in LED-Control-Board-V2
Similar boards
ESP8266
ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1kESP8266
HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738ESP8266
RatGDO-OpenSource-Bare-ESP8266
Kaldek
55 × 82.7 mm20 parts2LMIT506ESP8266
RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506ESP8266
Goatgdo
Kaldek
32.9 × 53.3 mm23 parts2LMIT506ESP8266
Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398