22 open source boards using the XC6210B332MR
Real designs built with the XC6210B332MR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Hearty-LED-Necklace-Badge
niteshkadyan
66.7 × 61.7 mm173 parts2LMIT10RP2040/RP2350
Aryess
pioz
303.8 × 94.2 mm238 parts2LMIT2ESP8266
3ChannelCCdriver
wszeto9
49 × 49 mm58 parts2LNo license2ESP32
Camera-R2000
grbbt
70 × 70 mm82 parts4LMIT1ESP32
XIAO ESP32C3
bombarie
21 × 17.8 mm67 parts4LCC-BY-NC-4.01ESP32
SmolExG
matthewlai
51 × 33 mm60 parts4LNo license1Esp pmsa
neggles
43 × 50 mm18 parts2LCC-BY-SA-4.01STM32
MR71 ESR METER
7961
90 × 93 mm131 parts4LNo license0STM32
3-Axis-Gimbal
IsmaHaikal0910
28 × 40 mm73 parts4LNo license0ESP32
HorseSense
Philippe12
35 × 55.3 mm63 parts4LNo license0RP2040/RP2350
NeoPod
lsyzg
100 × 120 mm62 parts4LNo license0ESP8266
Breakout boards
wszeto9
49 × 21.4 mm58 parts2LNo license0ORCASandbox
Midlandswim
33.2 × 46.8 mm48 parts4LNo license0RP2040/RP2350
Diy watch
elsw
37.1 × 37 mm43 parts4LNo license0ESP8266
LED Controller V3
wszeto9
48 × 48 mm41 parts2LNo license0RP2040/RP2350
Doorman slot
AzonInc
23 × 32 mm26 parts4LGPL-3.0241ESP8266
3ChannelCCdriver panelized
wszeto9
100 × 100 mm58 parts2LNo license2ESP8266
Breakout boards panelized
wszeto9
100.1 × 91.7 mm55 parts2LNo license0ORCASandbox3rdIterationGood
Midlandswim
33.2 × 46.8 mm48 parts4LNo license0ESP32
Macro devboard ESP32
YingK8
65.6 × 57.2 mm46 parts4LNo license0ESP8266
LED Controller V3 panelized
wszeto9
98.5 × 98.5 mm41 parts2LNo license0STM32
Stm32Board
Heorenmaru
30.4 × 25.2 mm20 parts2LCC-BY-SA-4.01
How designs wire the XC6210B332MR
Read from the KiCad layouts of 18 open source designs, one per repository: what each pin of the XC6210B332MR connects to, and the resistors, capacitors and other passives placed on it.
- The VIN pin has a decoupling capacitor on 16 of 18 designs, most often 1 µF (then 2.2 µF).
- The VOUT pin has a decoupling capacitor on 16 of 18 designs, most often 10 µF (then 1 µF).
- The CE pin is tied to 5V on 14 of 18 designs (a signal on 4).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VINpin 1 | Connected to: 5V 78% · a signal 22% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| CEpin 3 | Connected to: 5V 78% · a signal 22% | — |
| NCpin 4 | Connected to: Not connected 94% | — |
| VOUTpin 5 | Connected to: 3.3V 94% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Doorman slot by AzonInc, Hearty-LED-Necklace-Badge by niteshkadyan, Aryess by pioz and 3ChannelCCdriver by wszeto9.
The XC6210B332MR in open source designs
The gallery holds 22 open source boards using the XC6210B332MR from 18 GitHub repositories; a typical one measures about 49 × 49.5 mm and carries around 58 components.
55% use four copper layers or more, and 27% carry an open source license.
The most starred is Doorman slot by AzonInc.
Parts used alongside the XC6210B332MR
Microcontrollers on boards using the XC6210B332MR
What boards using the XC6210B332MR are built for
XC6210B332MR: common questions
Where can I find a XC6210B332MR reference design?
Each of the 22 boards on this page is a real design using the XC6210B332MR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the XC6210B332MR VIN pin?
The VIN pin has a decoupling capacitor on 16 of 18 designs, most often 1 µF (then 2.2 µF). Counted from the KiCad layouts of 18 open source designs using the XC6210B332MR.
What decoupling capacitors do designs use on the XC6210B332MR VOUT pin?
The VOUT pin has a decoupling capacitor on 16 of 18 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 18 open source designs using the XC6210B332MR.
How is the XC6210B332MR CE pin connected?
The CE pin is tied to 5V on 14 of 18 designs (a signal on 4). Counted from the KiCad layouts of 18 open source designs using the XC6210B332MR.
What parts are used alongside the XC6210B332MR?
The RP2040, ESP-12F and ESP32-C3-WROOM-02 appear in the most repositories here.
Which microcontrollers do boards using the XC6210B332MR use?
Most are built on ESP8266 (6), ESP32 (5), RP2040/RP2350 (4) and STM32 (3).
How big is a typical board using the XC6210B332MR?
The median is 49 × 49.5 mm, and 45% are two-layer designs.
What is the most popular open source board using the XC6210B332MR?
By GitHub stars, Doorman slot by AzonInc, with 241 stars.
Can I simulate one of these boards using the XC6210B332MR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.