K3jr controller
wyolum·KlokTHREEjr·k3jr_controller_kicad_v2/k3jr_controller.kicad_pcb
About the K3jr controller PCB
K3jr controller is an open source ESP32 PCB design by wyolum, published on GitHub. It is a 2-layer board measuring 161.3 × 40.6 mm, with 70 components from 46 distinct parts.
Its main chip is the ESP-WROOM-32, from the ESP32 family. Other key parts include the DS3231N, 1117-33 and CP2102N-A01-GQFN28. By type, the board carries 19 resistors, 15 capacitors, 14 connectors, 6 switches, 4 ICs and 3 test points.
It belongs with the displays & leds designs in this gallery.
From the project
RGB LED matrix for text and animation display.
[CERN Open Hardware Licence v1.2 ]:http://www.ohwr.org/attachments/2388/cernohlv12.txt

Main components on the K3jr controller
K3jr controller bill of materials (BOM)
70 components, 46 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP-WROOM-32 ESP-wroom-32 | esp_wroom_32 | U129 |
| 1 | DS3231N | DS3231 | U130 |
| 1 | 1117-33 | SOT-223-3_TabPin2 | U131 |
| 1 | CP2102N-A01-GQFN28 | QFN-28-1EP_5x5mm_Pitch0.5mm | U132 |
| 1 | DDC114TU | SOT-363_SC-70-6 | Q1 |
| 1 | CLK_IN | 1pin | J1 |
| 1 | DAT_IN | 1pin | J2 |
| 1 | 5V | 1pin | J7 |
| 1 | GND | 1pin | J8 |
| 1 | MISO | BreakOutPad | J17 |
| 1 | 3V3 | BreakOutPad | J18 |
| 1 | SCK | BreakOutPad | J19 |
| 1 | SPI | Header_ISP | J20 |
| 1 | MOSI | BreakOutPad | J21 |
| 1 | RST | BreakOutPad | J22 |
| 1 | GND | BreakOutPad | J23 |
| 1 | I2C_EXT1 I2C_ext1 | Header_4x1 | J24 |
| 1 | I2C_EXT2 I2C_ext2 | Header_4x1 | J25 |
| 1 | USB_micro | USB_Micro-B_Molex-105017-0001 | P1 |
| 1 | Batt_RTC | CR2032_SMD2 | BT1 |
Show 26 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LED_PWR_EN | R_0402 | JP1 |
| 2 | LDR | r_0805_ldr_2 | LDR1, LDR2 |
| 1 | SW-ENTER | SW_SMD | S1 |
| 1 | SW-INC | SW_SMD | S2 |
| 1 | SW-EN | SW_SMD | S3 |
| 1 | SW-BOOT | SW_SMD | S4 |
| 1 | SW-DEC | SW_SMD | S5 |
| 1 | SW-MODE | SW_SMD | S6 |
| 1 | ~RST | BreakOutPad | TP1 |
| 1 | SQR | BreakOutPad | TP2 |
| 1 | 32KHZ 32kHz | BreakOutPad | TP3 |
| 1 | RCLAMP0854P.TCT RClamp0854P.TCT | SOT-143 | D1 |
| 1 | LED_PWR | LED-0805 | D2 |
| 2 | 330E | r_0805 | L1, L2 |
| 3 | 10UF/25V 10uF/25V | c_2917 | C17, C23, C25 |
| 1 | 22UF/25V 22uF/25V | c_2917 | C18 |
| 3 | 1NF 1nF | c_0805 | C19, C20, C21 |
| 6 | 100NF 100nF | c_0805 | C22, C24, C26, C29, C30, C31 |
| 1 | 100UF/6V3 100uF/6V3 | c_2917 | C27 |
| 1 | 1UF/10V 1uF/10V | c_0805 | C28 |
| 9 | 10K 10k | r_0805 | R3, R6, R7, R10, R11, R12, R13, R24 +1 |
| 1 | 1k | r_0805 | R4 |
| 2 | 4K7 | r_0805 | R8, R9 |
| 3 | 470R | r_0805 | R16, R18, R22 |
| 2 | 0R NC | r_0805 | R19, R20 |
| 2 | 0R | r_0805 | R21, R23 |
K3jr controller design files
The KiCad project lives in the wyolum/KlokTHREEjr repository on GitHub; these links point at the commit this page was built from.
K3jr controller: common questions
What microcontroller does the K3jr controller use?
The K3jr controller is built around the ESP-WROOM-32, from the ESP32 family.
How big is the K3jr controller PCB?
The K3jr controller measures 161.3 × 40.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the K3jr controller?
70 components, from 46 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the K3jr controller design files?
From the wyolum/KlokTHREEjr repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the K3jr controller design in my own project?
The repository has no license, so all rights stay with wyolum. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the K3jr controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in KlokTHREEjr
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k