TiNA - Controller for TiM

wyolum·Wyolum-old-archive·KiCad/uControl_v3/uControl_v3.kicad_pcb

About the TiNA - Controller for TiM PCB

TiNA - Controller for TiM is an open source AVR/Arduino PCB design by wyolum, published on GitHub. It is a 2-layer board measuring 190 × 152 mm, with 147 components from 75 distinct parts.

Its main chip is the ATMEGA328-AU-ND, from the AVR/Arduino family. Other key parts include the TXB0104D, TPS62133, TPS62132, DS3231N and TSX0108. By type, the board carries 39 capacitors, 27 resistors, 26 connectors, 9 ICs, 8 diodes and 6 switches.

From the project

Automatically exported from code.google.com/p/clockthree

Main components on the TiNA - Controller for TiM

TXB0104D TPS62133 TPS62132 DS3231N ATMEGA328-AU-ND TSX0108 CAT24C256 BEAGLEBONE ADXL345

TiNA - Controller for TiM bill of materials (BOM)

147 components, 75 distinct parts — part numbers from the project's BOM.

Qty	Part	Footprint	Refs
1	TXB0104D	TXB0104D	U1
1	TPS62133	TPS62132	U3
1	TPS62132	TPS62132	U4
1	DS3231N	DS3231	U5
1	ATMEGA328-AU-ND	TQFP32	U7
1	TSX0108	TXS0108EPWR	U8
1	CAT24C256	SO8E	U9
1	BEAGLEBONE	BEAGLEBONE	U10
1	ADXL345	ADXL345	U11
4	BCP5416TA	SOT223	Q1, Q2, Q3, Q4
1	2N7002KW	SOT323	Q5
1	16MHz	Xtal_SMD3	X1
1	5V_EXT	Header_2	J1
1	3V3_EXT	Header_2	J2
1	addr	Header_2x2	J3
1	AREF	ShortLink2	P1
1	ICSP	Header_ISP	P4
1	FTDI	Header_FTDI	P5
1	GAGE_PR	HCEM500GUH9P3	P7
1	ABSO_PR	HDIB002AUY8H5	P8

Show 55 more

Qty	Part	Footprint	Refs
2	C3SB	pin_strip_4-90	P9, P10
1	VSel_Vlv	Header_3	P11
1	PWR_IN	Header_2	P13
1	X_VALVE	X_Valve_2	P14
1	Flow_Conn	Conn_Flow_SFM3000_Male	P15
1	FLOWMETER	FlowMeter_SFM3000	P16
1	PUMP	Pump_P54E01R_02	P17
1	U6_OE	ShortLink2	P19
1	5V_LINK	ShortLink2	P20
2	CONN_23X2	PIN_ARRAY_23X2	P21, P22
1	Alt_Add	ShortLink2	P23
1	PWR_IN	JACK_ALIM	P24
1	Int1	ShortLink2	P28
1	Int2	ShortLink2	P29
1	VSel_Vlv2	Header_3	P34
1	X_VALVE2	X_Valve_2	P38
3	I_O	I_O	B1, B2, B3
2	PB0	I_O	B4, B12
1	5V_ATMega	I_O	B5
1	3V3_BBB	I_O	B6
1	PC0	I_O	B8
1	PC1	I_O	B9
1	PC6	I_O	B10
1	PC7	I_O	B11
1	BATT_HOLDER	CR2032	BT1
1	PCB	PCB	PCB1
10	SCREW	vite_3mm	SC1, SC2, SC3, SC4, SC5, SC6, SC7, SC8 +2
1	BUZZER	Speaker	SP1
1	Reset	SW_PB_V_H	SW1
1	INT0	SW_PB_V_H	SW2
1	INT1	SW_PB_V_H	SW3
1	PWR_BBB	SW_PB_V_H	SW4
1	GPIO1_6	SW_PB_V_H	SW5
1	GPIO1_29	SW_PB_V_H	SW6
4	S1D-13-F	diode-DO214AC	D1, D3, D4, D9
1	5V0	led_0805	D5
1	3V3	led_0805	D6
1	BLINK	led_0805	D7
1	12V	led_0805	D8
2	2u2H,3.0A	Inductor_SMD3	L1, L2
25	100nF	c_0805	C1, C4, C5, C7, C8, C9, C10, C11 +17
2	22pF	c_0603	C2, C3
2	22uF X7R	c_1210	C19, C33
2	3.3nF	c_0805	C21, C35
6	100uF	C_ELCO_SMD	C22, C26, C27, C36, C37, C42
2	10uF X7R	c_1206	C30, C38
10	10k	r_0805	R1, R2, R3, R4, R11, R15, R21, R22 +2
2	4k7	r_0805	R5, R12
3	1k	r_0805	R6, R10, R13
2	100k	r_0805	R7, R14
1	330E	r_0805	R8
1	120E	r_0805	R9
4	4k75	r_0805	R16, R17, R18, R23
2	1k5	r_0805	R19, R20
2	220	r_0805	R24, R25

TiNA - Controller for TiM design files

The KiCad project lives in the wyolum/Wyolum-old-archive repository on GitHub; these links point at the commit this page was built from.

TiNA - Controller for TiM: common questions

What microcontroller does the TiNA - Controller for TiM use?

The TiNA - Controller for TiM is built around the ATMEGA328-AU-ND, from the AVR/Arduino family.

How big is the TiNA - Controller for TiM PCB?

The TiNA - Controller for TiM measures 190 × 152 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the TiNA - Controller for TiM?

147 components, from 75 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the TiNA - Controller for TiM design files?

From the wyolum/Wyolum-old-archive repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the TiNA - Controller for TiM design in my own project?

The repository has no license, so all rights stay with wyolum. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the TiNA - Controller for TiM without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.