8 open source boards using the TPS62132
Real designs built with the TPS62132, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
M.2-FPGA-Accelerator
KaiPereira
22 × 80 mm276 parts6LNo license25STM32
M4psu
cuspaceflight
269 × 155 mm246 parts2LNo license8FPGA
Icepool board
jkiv
140 × 58 mm116 parts4LCC-BY-NC-4.06STM32
Embedded-AGC-DSKY-emulator
Gregox273
91 × 120 mm157 parts2LGPL-3.03AVR/Arduino
TiNA - Controller for TiM
wyolum
190 × 152 mm147 parts2LNo license1ESP32
Biro 1
PROJECT-BIRO
158.5 × 81.5 mm129 parts4LMIT1AVR/Arduino
UControl v3
wyolum
190 × 152 mm147 parts2LMIT0STM32
Jfox fmu
Jettanakorn
100 × 80 mm125 parts6LNo license0
How designs wire the TPS62132
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the TPS62132 connects to, and the resistors, capacitors and other passives placed on it.
- The SW_1 pin has a inductor on 8 of 8 designs, most often 2.2 µH (then 1.5 µH).
- The SW_2 pin has a inductor on 8 of 8 designs, most often 2.2 µH (then 1.5 µH).
- The SW_3 pin has a inductor on 8 of 8 designs, most often 2.2 µH (then 1.5 µH).
- The SS/TR_9 pin has a capacitor to GND on 8 of 8 designs, most often 3.3 nF (then 47 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SW_1pin 1 | Connected to: Signal 100% |
|
| SW_2pin 2 | Connected to: Signal 100% |
|
| SW_3pin 3 | Connected to: Signal 100% |
|
| PG_4pin 4 | Connected to: Signal 88% |
|
| FB_5pin 5 | Connected to: GND 100% | — |
| GND_6pin 6 | Connected to: GND 100% | — |
| FSW_7pin 7 | Connected to: GND 88% | — |
| DEF_8pin 8 | Connected to: GND 88% | — |
| SS/TR_9pin 9 | Connected to: Signal 100% |
|
| VIN_10pin 10 | Connected to: 12V 100% |
|
| VIN_11pin 11 | Connected to: 12V 100% |
|
| VIN_12pin 12 | Connected to: 12V 100% |
|
| EN_13pin 13 | Connected to: 12V 100% | — |
| VOS_14pin 14 | Connected to: 3.3V 100% |
|
| GND_15pin 15 | Connected to: GND 100% | — |
| GND_16pin 16 | Connected to: GND 100% | — |
| GND_17pin 17 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include M.2-FPGA-Accelerator by KaiPereira, M4psu by cuspaceflight, Icepool board by jkiv and Embedded-AGC-DSKY-emulator by Gregox273.
The TPS62132 in open source designs
The gallery holds 8 open source boards using the TPS62132 from 8 GitHub repositories; a typical one measures about 149.3 × 100.8 mm and carries around 147 components.
50% are two-layer designs, the rest use four layers or more, and 38% carry an open source license.
The most starred is M.2-FPGA-Accelerator by KaiPereira.
Parts used alongside the TPS62132
Microcontrollers on boards using the TPS62132
What boards using the TPS62132 are built for
TPS62132: common questions
Where can I find a TPS62132 reference design?
Each of the 8 boards on this page is a real design using the TPS62132. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TPS62132 SW_1 pin connected?
The SW_1 pin has a inductor on 8 of 8 designs, most often 2.2 µH (then 1.5 µH). Counted from the KiCad layouts of 8 open source designs using the TPS62132.
How is the TPS62132 SW_2 pin connected?
The SW_2 pin has a inductor on 8 of 8 designs, most often 2.2 µH (then 1.5 µH). Counted from the KiCad layouts of 8 open source designs using the TPS62132.
How is the TPS62132 SW_3 pin connected?
The SW_3 pin has a inductor on 8 of 8 designs, most often 2.2 µH (then 1.5 µH). Counted from the KiCad layouts of 8 open source designs using the TPS62132.
What parts are used alongside the TPS62132?
The TPS62133, ADXL345, ATMEGA328-AU-ND, BEAGLEBONE and CAT24C256 appear in the most repositories here.
Which microcontrollers do boards using the TPS62132 use?
Most are built on STM32 (3), AVR/Arduino (2), FPGA (2) and ESP32 (1).
How big is a typical board using the TPS62132?
The median is 149.3 × 100.8 mm, and 50% are two-layer designs.
What is the most popular open source board using the TPS62132?
By GitHub stars, M.2-FPGA-Accelerator by KaiPereira, with 25 stars.
Can I simulate one of these boards using the TPS62132 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.