5 open source boards using the BEAGLEBONE

Real designs built with the BEAGLEBONE, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the BEAGLEBONE

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the BEAGLEBONE connects to, and the resistors, capacitors and other passives placed on it.

  • Pin C19 has a pull-up to 3.3V on 5 of 5 designs, most often 1.5 kΩ (then 4.7 kΩ).
  • Pin C20 has a pull-up to 3.3V on 5 of 5 designs, most often 1.5 kΩ (then 4.7 kΩ).
  • Pin A1 is left unconnected on 5 of 5 designs.
  • Pin A2 is left unconnected on 5 of 5 designs.
Pin A1Connected to: Not connected 100%
Pin A2Connected to: Not connected 100%
Pin A3Connected to: Not connected 100%
Pin A4Connected to: Not connected 100%
Pin A5Connected to: Not connected 100%
Pin A6Connected to: Not connected 100%
Pin A7Connected to: Not connected 100%
Pin A8Connected to: Not connected 100%
Pin A9Connected to: Not connected 100%
Pin A10Connected to: Not connected 100%
Pin B1Connected to: GND 100%
Pin B2Connected to: GND 100%
Pin B9Connected to: A connector 60% · not connected 20%
  • Pull-up to 3.3V on 40% · 4.7 kΩ (2)
  • Series resistor on 40% · 220 Ω (2)
Pin B26Connected to: A connector 60% · not connected 20%
  • Series resistor on 60% · 220 Ω (2), 1 kΩ (1)
  • Pull-up to 3.3V on 40% · 4.75 kΩ (2)
Pin C1Connected to: GND 100%
Pin C2Connected to: GND 100%
Pin C3Connected to: 3.3V 100%
Pin C4Connected to: 3.3V 100%
Pin C5Connected to: 5V 100%
Pin C6Connected to: 5V 100%
Pin C11Connected to: A connector 60%
  • Series resistor on 40% · 330 Ω (2)
Pin C13Connected to: A connector 60%
  • Series resistor on 40% · 330 Ω (2)
Pin C19Connected to: A connector 80%, CAT24C256 60%, BQ32000 40%
  • Pull-up to 3.3V on 100% · 1.5 kΩ (3), 4.7 kΩ (2)
Pin C20Connected to: A connector 80%, CAT24C256 60%, BQ32000 40%
  • Pull-up to 3.3V on 100% · 1.5 kΩ (3), 4.7 kΩ (2)
Pin C25Connected to: A connector 60%, PCA9685 40%
  • Pull-up to 3.3V on 40% · 10 kΩ (2)
Pin C32Connected to: VDD_ADC 60% · not connected 40%
Pin C33Connected to: A connector 60%
  • Resistor to GND on 40% · 820 Ω (2)
  • Series resistor on 40% · 1.47 kΩ (1)
Pin C34Connected to: GND 100%
Pin C35Connected to: A connector 60%
  • Resistor to GND on 40% · 820 Ω (2)
  • Series resistor on 40% · 1.47 kΩ (1), 4.2 kΩ (1)
Pin C36Connected to: A connector 60%
  • Resistor to GND on 40% · 820 Ω (2)
  • Series resistor on 40% · 1.47 kΩ (1)
Pin C37Connected to: A connector 60%
  • Resistor to GND on 40% · 820 Ω (2)
  • Series resistor on 40% · 680 Ω (1)
Pin C38Connected to: A connector 60%
  • Resistor to GND on 40% · 820 Ω (2)
  • Series resistor on 40% · 680 Ω (1)
Pin C39Connected to: A connector 60%
  • Series resistor on 40% · 4.7 kΩ (1), 8.2 kΩ (1)
  • Resistor to GND on 40% · 820 Ω (2)
  • Capacitor to GND on 40% · 100 nF (1), 33 nF (1)
Pin C40Connected to: A connector 60%
  • Resistor to GND on 40% · 820 Ω (2)
  • Series resistor on 40% · 680 Ω (1)
Pin C43Connected to: GND 100%
Pin C44Connected to: GND 100%
Pin C45Connected to: GND 100%
Pin C46Connected to: GND 100%
Pin M1Connected to: Not connected 100%
Pin M2Connected to: Not connected 100%

66 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include RoboCape by PREDICT-EPFL, TiNA - Controller for TiM by wyolum, Cvra cape by cvra and TiNA-append by wyolum.

The BEAGLEBONE in open source designs

The gallery holds 5 open source boards using the BEAGLEBONE from 5 GitHub repositories; a typical one measures about 190 × 152 mm and carries around 147 components.

100% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.

The most starred is RoboCape by PREDICT-EPFL.

Microcontrollers on boards using the BEAGLEBONE

What boards using the BEAGLEBONE are built for

BEAGLEBONE: common questions

Where can I find a BEAGLEBONE reference design?

Each of the 5 boards on this page is a real design using the BEAGLEBONE. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the BEAGLEBONE pin C19?

Pin C19 has a pull-up to 3.3V on 5 of 5 designs, most often 1.5 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 5 open source designs using the BEAGLEBONE.

What pull-up resistor is used on the BEAGLEBONE pin C20?

Pin C20 has a pull-up to 3.3V on 5 of 5 designs, most often 1.5 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 5 open source designs using the BEAGLEBONE.

How is the BEAGLEBONE pin A1 connected?

Pin A1 is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the BEAGLEBONE.

What parts are used alongside the BEAGLEBONE?

The ADXL345, ATMEGA328-AU-ND, CAT24C256, DS3231N and TPS62133 appear in the most repositories here.

Which microcontrollers do boards using the BEAGLEBONE use?

Most are built on AVR/Arduino (3).

How big is a typical board using the BEAGLEBONE?

The median is 190 × 152 mm, and 100% are two-layer designs.

What is the most popular open source board using the BEAGLEBONE?

By GitHub stars, RoboCape by PREDICT-EPFL, with 4 stars.

Can I simulate one of these boards using the BEAGLEBONE before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part