OpenRX-Lite

yasir-shahzad·OpenRX·OpenRX-Lite/OpenRX-Lite.kicad_pcb

OpenRX-Lite PCB layout, top view — open source ESP32 board by yasir-shahzad

About the OpenRX-Lite PCB

OpenRX-Lite is an open source ESP32 PCB design by yasir-shahzad, published on GitHub under the CERN-OHL-S-2.0 license. It is a 6-layer board measuring 10 × 10.5 mm, with 47 components from 27 distinct parts.

Its main chip is the ESP32-C3, from the ESP32 family. Other key parts include the TLV75533PDQNR and SX1281IMLTRT. By type, the board carries 25 capacitors, 5 test points, 4 inductors, 4 resistors, 3 ICs and 2 antennas.

It belongs with the iot & wireless and rf & radio designs in this gallery.

From the project

Open-source ExpressLRS 4.0 receiver family. Part of the OpenDrone ecosystem.

Open-source ExpressLRS (ELRS) receiver line for FPV/RC. Four board variants share one Espressif ESP32-C3 core, an on-board TLV75533 3.3 V LDO, and the upstream ExpressLRS firmware; they differ only in radio IC, frequency band, RF front-end, and ELRS antenna. All four are 6-layer.

Antenna notes (verified from the schematic net labels): - Every variant carries a 2450AT18A100E ceramic chip antenna (AE1) on the net WIFI — this is the ESP32-C3 Wi-Fi antenna used for OTA flashing/config, not the ELRS link antenna. - The ELRS link antenna is fed from the radio's RF output through the band-pass…

OpenRX-Lite, from the project README
From the project README

Main components on the OpenRX-Lite

OpenRX-Lite bill of materials (BOM)

47 components, 27 distinct parts.

QtyPartRefs
1
ESP32-C3
U1
1
TLV75533PDQNR
U2
1
SX1281IMLTRT
U3
1
CJ17-400001010B20
X1
1
2450AT18A100E
AE1
1
47948-0001
AE2
1
2450FM07D0034T
JOHANSON(约翰逊)
FL1
1
OW7EL89CENUNFAYLC-52M
OSC1
1
RX
TP1
1
TX
TP2
1
5V
TP3
1
GND
TP4
1
BOOT
TP5
1
XL-1010RGBC-WS2812B
D1
1
24nH
L1
1
2.5nH
L2
1
2.0nH
L3
1
15uH
L4
2
15pF
C1, C3
6
1uF
C4, C10, C15, C23, C25, C28
Show 7 more
QtyPartRefs
7
100nF
C5, C6, C9, C12, C13, C14, C17
3
10uF
C8, C11, C16
1
1nF
C19
1
470nF
C20
2
1.2pF
C21, C22
3
10nF
C24, C26, C27
4
10k
R2, R3, R4, R5

OpenRX-Lite design files

The KiCad project lives in the yasir-shahzad/OpenRX repository on GitHub; these links point at the commit this page was built from.

OpenRX-Lite: common questions

What microcontroller does the OpenRX-Lite use?

The OpenRX-Lite is built around the ESP32-C3, from the ESP32 family.

How big is the OpenRX-Lite PCB?

The OpenRX-Lite measures 10 × 10.5 mm, has 6 copper layers and is 1 mm thick.

How many components are on the OpenRX-Lite?

47 components, from 27 distinct parts. The full bill of materials is listed on this page.

Where can I download the OpenRX-Lite design files?

From the yasir-shahzad/OpenRX repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the OpenRX-Lite design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which yasir-shahzad chose for the repository.

Can I test firmware for the OpenRX-Lite without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in OpenRX

Similar boards