OpenRX-all
yasir-shahzad·OpenRX·OpenRX-Gemini/OpenRX-all.kicad_pcb
About the OpenRX-all PCB
OpenRX-all is an open source ESP32 PCB design by yasir-shahzad, published on GitHub under the CERN-OHL-S-2.0 license. It is a 6-layer board measuring 64.2 × 16.3 mm, with 240 components from 46 distinct parts.
Its main chip is the ESP32-C3, from the ESP32 family. Other key parts include the TLV75533PDQNR, LR1121IMLTRT, RFX2401C, SKY13373-460LF and TS2306A 240GF MSM 9_C2976675. By type, the board carries 124 capacitors, 28 resistors, 20 ICs, 20 inductors, 19 test points and 5 antennas.
It belongs with the iot & wireless and rf & radio designs in this gallery.
From the project
Open-source ExpressLRS 4.0 receiver family. Part of the OpenDrone ecosystem.
Open-source ExpressLRS (ELRS) receiver line for FPV/RC. Four board variants share one Espressif ESP32-C3 core, an on-board TLV75533 3.3 V LDO, and the upstream ExpressLRS firmware; they differ only in radio IC, frequency band, RF front-end, and ELRS antenna. All four are 6-layer.
Antenna notes (verified from the schematic net labels): - Every variant carries a 2450AT18A100E ceramic chip antenna (AE1) on the net WIFI — this is the ESP32-C3 Wi-Fi antenna used for OTA flashing/config, not the ELRS link antenna. - The ELRS link antenna is fed from the radio's RF output through the band-pass…

Main components on the OpenRX-all
OpenRX-all bill of materials (BOM)
240 components, 46 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | ESP32-C3 | QFN-32-1EP_5x5mm_P0.5mm_EP3.7x3.7mm | U1, U19, U22, U25 |
| 4 | TLV75533PDQNR | X2SON-4_L1.0-W1.0-P0.65-TL-EP | U2, U20, U23, U26 |
| 3 | LR1121IMLTRT | QFN-32-1EP_5x5mm_P0.5mm_EP3.7x3.7mm | U3, U6, U27 |
| 3 | RFX2401C | QFN-16_L3.0-W3.0-P0.50-BL-EP1.7 | U4, U7, U28 |
| 3 | SKY13373-460LF | QFN-12_EP_2x2_Pitch0.5mm | U5, U8, U29 |
| 1 | TS2306A 240GF MSM 9_C2976675 | SW-SMD_4P-L3.0-W2.0-P0.85-LS3.5 | U9 |
| 2 | SX1281IMLTRT | QFN-24_L4.0-W4.0-P0.50-TL-EP2.6 | U21, U24 |
| 4 | CJ17-400001010B20 | CRYSTAL-SMD_4P-L1.6-W1.2-BL | X1, X3, X4, X5 |
| 3 | Conn_Coaxial_Small | U.FL_Hirose_U.FL-R-SMT-1_Vertical | J1, J2, J6 |
| 1 | Conn_Coaxial | U.FL_Hirose_U.FL-R-SMT-1_Vertical | J5 |
| 4 | 2450AT18A100E | ANT-SMD_L3.2-W1.6 | AE1, AE3, AE4, AE6 |
| 1 | 47948-0001 | ANT-SMD_47948-0001 | AE5 |
| 5 | 2450FM07D0034T JOHANSON(约翰逊) | FILTER-SMD_4P-L1.0-W0.5-L | FL1, FL2, FL5, FL6, FL7 |
| 2 | OW7EL89CENUYO3YLC-32M | OSC-SMD_4P-L2.0-W1.6-BL_TXC_7Z | OSC1, OSC5 |
| 2 | OW7EL89CENUNFAYLC-52M | OSC-SMD_4P-L2.0-W1.6-BL_TXC_7Z | OSC3, OSC4 |
| 3 | 0900PC16J0042001E | FILTER-SMD_10P-L2.0-W1.6-BL | T1, T2, T5 |
| 4 | RX | SolderPad_1.2x2.0mm | TP1, TP9, TP14, TP19 |
| 4 | TX | SolderPad_1.2x2.0mm | TP2, TP10, TP15, TP20 |
| 4 | 5V | SolderPad_1.2x2.0mm | TP3, TP11, TP16, TP21 |
| 4 | GND | SolderPad_1.2x2.0mm | TP4, TP12, TP17, TP22 |
Show 26 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | BOOT | SolderPad_1.2x2.0mm | TP13, TP18, TP23 |
| 4 | XL-1010RGBC-WS2812B | LED-SMD_4P-L1.0-W1.0-TL_XL-1010RGBC-WS2812B | D1, D3, D4, D5 |
| 3 | 10uH | L_0603_1608Metric | L1, L6, L23 |
| 4 | 24nH | L_0201_0603Metric | L2, L15, L19, L24 |
| 4 | 2.0nH | L_0201_0603Metric | L3, L17, L21, L25 |
| 4 | 2.5nH | L_0201_0603Metric | L4, L16, L20, L26 |
| 3 | 47nH | L_0402_1005Metric | L5, L7, L27 |
| 2 | 15uH | L_0805_2012Metric | L18, L22 |
| 8 | 15pF | C_0201_0603Metric | C1, C3, C87, C88, C112, C113, C137, C139 |
| 9 | 47p | C_0201_0603Metric | C2, C23, C24, C39, C42, C44, C138, C159 +1 |
| 27 | 1uF | C_0201_0603Metric | C4, C10, C17, C25, C27, C28, C31, C41 +19 |
| 30 | 100nF | C_0201_0603Metric | C5, C6, C9, C12, C13, C14, C16, C35 +22 |
| 3 | 10pF | C_0201_0603Metric | C7, C34, C143 |
| 12 | 10uF | C_0402_1005Metric | C8, C11, C18, C92, C95, C100, C117, C120 +4 |
| 3 | 47pF | C_0201_0603Metric | C15, C36, C151 |
| 3 | 2.2nF | C_0201_0603Metric | C19, C33, C155 |
| 5 | 470nF | C_0201_0603Metric | C20, C38, C103, C128, C156 |
| 3 | 220pF | C_0201_0603Metric | C21, C40, C157 |
| 3 | 1n | C_0201_0603Metric | C22, C43, C158 |
| 8 | 10nF | C_0201_0603Metric | C26, C107, C109, C110, C132, C134, C135, C162 |
| 8 | 1.2pF | C_0201_0603Metric | C29, C30, C104, C105, C129, C130, C165, C166 |
| 2 | 1nF | C_0201_0603Metric | C102, C127 |
| 3 | 200 | R_0201_0603Metric | R1, R10, R33 |
| 16 | 10k | R_0201_0603Metric | R2, R3, R4, R5, R25, R26, R27, R28 +8 |
| 3 | 220 | R_0201_0603Metric | R6, R9, R38 |
| 6 | 100k | R_0201_0603Metric | R7, R8, R11, R12, R39, R40 |
OpenRX-all design files
The KiCad project lives in the yasir-shahzad/OpenRX repository on GitHub; these links point at the commit this page was built from.
OpenRX-all: common questions
What microcontroller does the OpenRX-all use?
The OpenRX-all is built around the ESP32-C3, from the ESP32 family.
How big is the OpenRX-all PCB?
The OpenRX-all measures 64.2 × 16.3 mm, has 6 copper layers and is 1 mm thick.
How many components are on the OpenRX-all?
240 components, from 46 distinct parts. The full bill of materials is listed on this page.
Where can I download the OpenRX-all design files?
From the yasir-shahzad/OpenRX repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the OpenRX-all design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which yasir-shahzad chose for the repository.
Can I test firmware for the OpenRX-all without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in OpenRX
ESP32
OpenRX-Gemini
yasir-shahzad
17 × 15.7 mm85 parts6LCERN-OHL-S-2.00ESP32
OpenRX-Gemini sameside
yasir-shahzad
17 × 17.6 mm85 parts6LCERN-OHL-S-2.00ESP32
OpenRX-Mono
yasir-shahzad
10 × 16.3 mm61 parts6LCERN-OHL-S-2.00ESP32
OpenRX-Lite
yasir-shahzad
10 × 10.5 mm47 parts6LCERN-OHL-S-2.00ESP32
OpenRX-Lite-UFL
yasir-shahzad
10 × 10.5 mm47 parts6LCERN-OHL-S-2.00
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k