OpenRX-Gemini

yasir-shahzad·OpenRX·OpenRX-Gemini/OpenRX-Gemini.kicad_pcb

OpenRX-Gemini PCB layout, top view — open source ESP32 board by yasir-shahzad

About the OpenRX-Gemini PCB

OpenRX-Gemini is an open source ESP32 PCB design by yasir-shahzad, published on GitHub under the CERN-OHL-S-2.0 license. It is a 6-layer board measuring 17 × 15.7 mm, with 85 components from 39 distinct parts.

Its main chip is the ESP32-C3, from the ESP32 family. Other key parts include the TLV75533PDQNR, LR1121IMLTRT, RFX2401C, SKY13373-460LF and TS2306A 240GF MSM 9_C2976675. By type, the board carries 43 capacitors, 12 resistors, 9 ICs, 7 inductors, 4 test points and 2 connectors.

It belongs with the iot & wireless and rf & radio designs in this gallery.

From the project

Open-source ExpressLRS 4.0 receiver family. Part of the OpenDrone ecosystem.

Open-source ExpressLRS (ELRS) receiver line for FPV/RC. Four board variants share one Espressif ESP32-C3 core, an on-board TLV75533 3.3 V LDO, and the upstream ExpressLRS firmware; they differ only in radio IC, frequency band, RF front-end, and ELRS antenna. All four are 6-layer.

Antenna notes (verified from the schematic net labels): - Every variant carries a 2450AT18A100E ceramic chip antenna (AE1) on the net WIFI — this is the ESP32-C3 Wi-Fi antenna used for OTA flashing/config, not the ELRS link antenna. - The ELRS link antenna is fed from the radio's RF output through the band-pass…

OpenRX-Gemini, from the project README
From the project README

Main components on the OpenRX-Gemini

OpenRX-Gemini bill of materials (BOM)

85 components, 39 distinct parts.

QtyPartRefs
1
ESP32-C3
U1
1
TLV75533PDQNR
U2
2
LR1121IMLTRT
U3, U6
2
RFX2401C
U4, U7
2
SKY13373-460LF
U5, U8
1
TS2306A 240GF MSM 9_C2976675
U9
1
CJ17-400001010B20
X1
2
Conn_Coaxial_Small
J1, J2
1
2450AT18A100E
AE1
2
2450FM07D0034T
JOHANSON(约翰逊)
FL1, FL2
1
OW7EL89CENUYO3YLC-32M
OSC1
2
0900PC16J0042001E
T1, T2
1
RX
TP1
1
TX
TP2
1
5V
TP3
1
GND
TP4
1
XL-1010RGBC-WS2812B
D1
2
10uH
L1, L6
1
24nH
L2
1
2.0nH
L3
Show 19 more
QtyPartRefs
1
2.5nH
L4
2
47nH
L5, L7
2
15pF
C1, C3
6
47p
C2, C23, C24, C39, C42, C44
8
1uF
C4, C10, C17, C25, C27, C28, C31, C41
9
100nF
C5, C6, C9, C12, C13, C14, C16, C35 +1
2
10pF
C7, C34
3
10uF
C8, C11, C18
2
47pF
C15, C36
2
2.2nF
C19, C33
2
470nF
C20, C38
2
220pF
C21, C40
2
1n
C22, C43
1
10nF
C26
2
1.2pF
C29, C30
2
200
R1, R10
4
10k
R2, R3, R4, R5
2
220
R6, R9
4
100k
R7, R8, R11, R12

OpenRX-Gemini design files

The KiCad project lives in the yasir-shahzad/OpenRX repository on GitHub; these links point at the commit this page was built from.

OpenRX-Gemini: common questions

What microcontroller does the OpenRX-Gemini use?

The OpenRX-Gemini is built around the ESP32-C3, from the ESP32 family.

How big is the OpenRX-Gemini PCB?

The OpenRX-Gemini measures 17 × 15.7 mm, has 6 copper layers and is 1 mm thick.

How many components are on the OpenRX-Gemini?

85 components, from 39 distinct parts. The full bill of materials is listed on this page.

Where can I download the OpenRX-Gemini design files?

From the yasir-shahzad/OpenRX repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the OpenRX-Gemini design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which yasir-shahzad chose for the repository.

Can I test firmware for the OpenRX-Gemini without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in OpenRX

Similar boards