Pebble
Yatekii·pebble·hardware/pebble.kicad_pcb
About the Pebble PCB
Pebble is an open source ESP32 PCB design by Yatekii, published on GitHub. It is a 4-layer board measuring 129 × 129 mm, with 163 components from 53 distinct parts.
Its main chip is the ESP32-C6-MINI-1, from the ESP32 family. Other key parts include the TPS61023DRLR, TPS563200, BMI270, MAX-M8Q and BMM350. By type, the board carries 74 diodes, 35 capacitors, 29 resistors, 9 ICs, 7 connectors and 4 inductors.
Main components on the Pebble
Pebble bill of materials (BOM)
163 components, 53 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS61023DRLR | SOT-563 | U1 |
| 1 | TPS563200 | SOT-23-6 | U2 |
| 1 | ESP32-C6-MINI-1 | ESP32-C6-MINI-1 | U3 |
| 1 | BMI270 | BMI270_BOS | U4 |
| 1 | MAX-M8Q | ublox_MAX | U5 |
| 1 | BMM350 | BGA9_BMM350_BOS | U6 |
| 1 | MAX77751CEFG+ | MAX77751CEFG+ | U7 |
| 1 | LPV521 | SOT-23-5 | U8 |
| 1 | MAX4906ELB+T | 21-0164_L1022&plus_1_MXM | U9 |
| 1 | BSS84 | SOT-23 | Q1 |
| 1 | BSS123 | SOT-23 | Q2 |
| 1 | UART | PinHeader_1x04_P1.27mm_Vertical | J1 |
| 1 | C22418213 GPS | U.FL_Molex_MCRF_73412-0110_Vertical | J2 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_G-Switch_GT-USB-7051x | J3 |
| 1 | BAT | PinHeader_1x02_P1.27mm_Vertical | J4 |
| 1 | CONN_01X03_PIN Conn_01x03_Pin | PinHeader_1x03_P1.27mm_Horizontal | J5 |
| 2 | ON | PinHeader_1x02_P1.27mm_Vertical | J6, J7 |
| 2 | BOOT | TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | JP1, JP2 |
| 1 | C315909 SW_Reed | 59170-1-S-00-D | SW1 |
| 72 | WS2812B-2020 | LED_WS2812B-2020_PLCC4_2.0x2.0mm | D1, D2, D3, D4, D5, D6, D7, D8 +64 |
Show 33 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Amber | LED_0603_1608Metric | D73 |
| 1 | White | LED_0603_1608Metric | D74 |
| 1 | 1u | L_Coilcraft_XxL4040 | L1 |
| 1 | 2.2U 2.2u | IND_SPM6530_TDK | L2 |
| 1 | 27N 27n | L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L3 |
| 1 | 0.47UH 0.47uH | IND_SRP2512TMA_BRN | L4 |
| 2 | 10U 10u | C_0603_1608Metric | C1, C5 |
| 5 | 22U 22u | C_0603_1608Metric | C2, C3, C7, C8, C15 |
| 12 | 100N 100n | C_0402_1005Metric | C4, C6, C9, C10, C11, C12, C13, C14 +4 |
| 3 | 2.2U 2.2u | C_0402_1005Metric | C17, C22, C23 |
| 2 | 1n | C_0402_1005Metric | C18, C32 |
| 1 | 1n | C_1206_3216Metric | C21 |
| 1 | 2.2UF 2.2uF | C_0402_1005Metric | C24 |
| 1 | 100NF 100nF | C_0402_1005Metric | C25 |
| 1 | 10U 10u | C_0805_2012Metric | C26 |
| 3 | 10UF 10uF | C_0805_2012Metric | C27, C28, C29 |
| 1 | 22U 22u | C_0805_2012Metric | C30 |
| 1 | 22UF 22uF | C_0805_2012Metric | C31 |
| 1 | 220P 220p | C_0402_1005Metric | C33 |
| 1 | DNP | C_0402_1005Metric | C35 |
| 10 | 100K 100k | R_0402_1005Metric | R1, R4, R5, R9, R10, R11, R12, R22 +2 |
| 3 | 0 | R_0402_1005Metric | R2, R6, R21 |
| 1 | 732K 732k | R_0402_1005Metric | R3 |
| 2 | 10K 10k | R_0402_1005Metric | R7, R23 |
| 1 | 33.2K 33.2k | R_0402_1005Metric | R8 |
| 1 | 10 | R_0402_1005Metric | R13 |
| 1 | 470 | R_0402_1005Metric | R14 |
| 1 | 1K2 1k2 | R_0402_1005Metric | R15 |
| 1 | 14K 14k | R_0402_1005Metric | R16 |
| 1 | 13.3K 13.3k | R_0402_1005Metric | R17 |
| 2 | 10M | R_0402_1005Metric | R18, R20 |
| 1 | 1M | R_0402_1005Metric | R19 |
| 4 | 4.7K 4.7k | R_0402_1005Metric | R26, R27, R28, R29 |
Pebble design files
The KiCad project lives in the Yatekii/pebble repository on GitHub; these links point at the commit this page was built from.
Pebble: common questions
What microcontroller does the Pebble use?
The Pebble is built around the ESP32-C6-MINI-1, from the ESP32 family.
How big is the Pebble PCB?
The Pebble measures 129 × 129 mm, has 4 copper layers and is 1.7104 mm thick.
How many components are on the Pebble?
163 components, from 53 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pebble design files?
From the Yatekii/pebble repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Pebble design in my own project?
The repository has no license, so all rights stay with Yatekii. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Pebble without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k