MerlynCAM

YeetTheAnson·MerlynCAM·PCB/MerlynCAM.kicad_pcb

MerlynCAM PCB layout, top view — open source RISC-V board by YeetTheAnson

About the MerlynCAM PCB

MerlynCAM is an open source RISC-V PCB design by YeetTheAnson, published on GitHub. It is a 4-layer board measuring 45 × 38 mm, with 144 components from 59 distinct parts.

Its main chip is the CH32V003F4U6, from the RISC-V family. Other key parts include the TPS63802DLAR, BQ25606RGER, RT8097CHGE, RT9193-18GB and ICS-43434. By type, the board carries 60 capacitors, 40 resistors, 16 test points, 12 ICs, 4 inductors and 3 transistors.

It belongs with the sensors, audio and power & battery designs in this gallery.

From the project

An action camera that records at 1080p@90, 1440p@60 and 4k@20 (With I2S microphone and gyro logging @ 150Hz)

This is my custom action camera, the MerlynCAM! This project was made to record HD footage on my FPV drones. It records video at 1080p@90, 1440p@60 and 4k@20. It also includes a BMI270 gyro to log motion data at 150Hz for Gyroflow video stabilization, and an ICS-43434 I2S microphone to capture propeller noise for the viewer's immersion.

The MerlynCAM is powered by the Sigmastar SSC338Q SOC. It is easy to use and includes a low power microcontroller onboard to manage the LED indicators, buttons, and power saving modes. There is only one button used for powering the camera on and off and…

MerlynCAM, from the project README
From the project README

Main components on the MerlynCAM

MerlynCAM bill of materials (BOM)

144 components, 59 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TPS63802DLAR
TI(德州仪器)
U1
1
BQ25606RGER
TI(德州仪器)
U2
2
RT8097CHGE
RICHTEK(立锜)
U3, U4
1
CH32V003F4U6
WCH(南京沁恒)
U5
1
RT9193-18GB
RICHTEK(立锜)
U6
1
ICS-43434
ICS43434
TDK InvenSense(应美盛)
U7
1
BMI270
Bosch(博世)
U8
1
INMP441
TDK InvenSense(应美盛)
U9
1
W25Q128JVSIQ
W25Q128JVSIQTR
Winbond(华邦)
U10
1
TF-115-BCP9
XUNPU(讯普)
U11
1
~
U12
3
AO3401A
Q1, Q2, Q3
1
T201624MBBCE2X
24MHz
YJX(雅晶鑫)
X1
1
OK-10F030-04
CN1
1
BAT
BT1
1
~
H1
1
TS24CA
SHOU HAN(首韩)
SW1
1
SWDIO
TP1
1
USART1_TX
TP2
1
UART_TX
TP3
Show 39 more
QtyPartRefs
1
UART_RX
TP4
1
USBD+
TP5
1
USBD-
TP6
1
+5-14V
TP7
1
1V0
TP8
1
1V5
TP9
1
3V3
TP10
1
1V8
TP11
1
GND
TP12
1
ETH_RN
TP13
1
ETH_RP
TP14
1
ETH_TN
TP15
1
ETH_TP
TP16
1
TYPE-C 16PIN
USB1
1
YLED0602RSIDE
YONGYUTAI(永裕泰)
LED1
1
YLED0602WSIDE
WHITE
YONGYUTAI(永裕泰)
LED2
1
Zener
D1
3
1.5uH
L1, L3, L4
1
0.47uH
L2
18
10uF
C1, C4, C6, C8, C10, C11, C13, C14 +10
1
4.7uF
C2
31
0.1uF
C3, C17, C21, C23, C24, C26, C28, C30 +23
1
47nF
C5
3
1uF
C7, C19, C20
3
22uF
C9, C12, C15
1
22nF
C18
2
8pF
C25, C27
3
100k
R1, R26, R29
2
270R
R2, R18
1
910R
R3
14
10k
R4, R5, R8, R9, R11, R13, R14, R15 +6
10
5.1k
R6, R7, R17, R25, R32, R33, R34, R35 +2
1
56k
R10
2
15k
R12, R16
1
36k
R24
3
100R
R27, R36, R37
1
51k
R28
1
4.7k
R30
1
200k
R31

MerlynCAM design files

The KiCad project lives in the YeetTheAnson/MerlynCAM repository on GitHub; these links point at the commit this page was built from.

MerlynCAM: common questions

What microcontroller does the MerlynCAM use?

The MerlynCAM is built around the CH32V003F4U6, from the RISC-V family.

How big is the MerlynCAM PCB?

The MerlynCAM measures 45 × 38 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the MerlynCAM?

144 components, from 59 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the MerlynCAM design files?

From the YeetTheAnson/MerlynCAM repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the MerlynCAM design in my own project?

The repository has no license, so all rights stay with YeetTheAnson. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MerlynCAM without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.

Similar boards