5 open source boards using the RT9193-18GB
Real designs built with the RT9193-18GB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Anyon e motherboard
byrantech
133 × 92 mm258 parts6LMIT4.3kESP32
NX-ISD
Ghost3379
77 × 48.6 mm108 parts4LGPL-3.02Msi SDR ADC
kelu124
85 × 54 mm88 parts4LNo license2RISC-V
MerlynCAM
YeetTheAnson
45 × 38 mm144 parts4LNo license1Raspberry Pi
CM5-AI-Cam-CopperPilot
CopperPilot
55 × 40 mm90 parts6LCERN-OHL-S-2.00
How designs wire the RT9193-18GB
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the RT9193-18GB connects to, and the resistors, capacitors and other passives placed on it.
- The VIN pin has a decoupling capacitor on 5 of 5 designs, most often 1 µF (then 100 nF).
- The VOUT pin has a decoupling capacitor on 5 of 5 designs, most often 1 µF (then 10 nF).
- The BP pin has a capacitor to GND on 4 of 5 designs, most often 22 nF (then 10 nF).
- The EN pin is tied to 3.3V on 3 of 5 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VINpin 1 | Connected to: 3.3V 80% · a signal 20% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| ENpin 3 | Connected to: 3.3V 60% · a signal 40% | — |
| BPpin 4 | Connected to: Signal 80% · not connected 20% |
|
| VOUTpin 5 | Connected to: 1.8V 80% · a signal 20% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Anyon e motherboard by byrantech, NX-ISD by Ghost3379, Msi SDR ADC by kelu124 and MerlynCAM by YeetTheAnson.
The RT9193-18GB in open source designs
The gallery holds 5 open source boards using the RT9193-18GB from 5 GitHub repositories; a typical one measures about 77 × 48.6 mm and carries around 108 components.
100% use four copper layers or more, and 60% carry an open source license.
The most starred is Anyon e motherboard by byrantech.
Parts used alongside the RT9193-18GB
Microcontrollers on boards using the RT9193-18GB
What boards using the RT9193-18GB are built for
RT9193-18GB: common questions
Where can I find a RT9193-18GB reference design?
Each of the 5 boards on this page is a real design using the RT9193-18GB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the RT9193-18GB VIN pin?
The VIN pin has a decoupling capacitor on 5 of 5 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the RT9193-18GB.
What decoupling capacitors do designs use on the RT9193-18GB VOUT pin?
The VOUT pin has a decoupling capacitor on 5 of 5 designs, most often 1 µF (then 10 nF). Counted from the KiCad layouts of 5 open source designs using the RT9193-18GB.
How is the RT9193-18GB BP pin connected?
The BP pin has a capacitor to GND on 4 of 5 designs, most often 22 nF (then 10 nF). Counted from the KiCad layouts of 5 open source designs using the RT9193-18GB.
Which microcontrollers do boards using the RT9193-18GB use?
Most are built on ESP32 (1), Raspberry Pi (1) and RISC-V (1).
How big is a typical board using the RT9193-18GB?
The median is 77 × 48.6 mm, and 0% are two-layer designs.
What is the most popular open source board using the RT9193-18GB?
By GitHub stars, Anyon e motherboard by byrantech, with 4,264 stars.
Can I simulate one of these boards using the RT9193-18GB before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.