Main
yminp·dj-filter-fx·kicad-hardware/revB/main-dj-filter-fx/main-dj-filter-fx.kicad_pcb
About the Main PCB
Main is an open source PCB design by yminp, published on GitHub under the CERN-OHL-W-2.0 license. It is a 2-layer board measuring 148.6 × 82 mm, with 156 components from 53 distinct parts.
Other key parts include the RC4580, TL072, LM358, LM2903 and LM13700. By type, the board carries 103 resistors, 25 capacitors, 11 ICs, 8 connectors, 4 diodes and 2 jumpers.
It belongs with the audio designs in this gallery.
From the project
A voltage-controlled DJ filter unit with LFO-like envelope function
Anyone building the current revision should treat it as an experimental, pre-prototype design rather than a fully validated production circuit.
The motivation came from the relative lack of dedicated standalone filter FX units for DJs. Filter effects are built into most modern DJ mixers, but older analog mixers may not provide an integrated filter effect. In those cases, applying a filter generally requires an external effects processor connected through the mixer's send/return path. The goal of this project is therefore to provide a dedicated external filter effect that can be used with…
Main components on the Main
Main bill of materials (BOM)
156 components, 53 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | RC4580 | SOIC-8_3.9x4.9mm_P1.27mm | U1, U6 |
| 2 | TL072 | SOIC-8_3.9x4.9mm_P1.27mm | U2, U3 |
| 1 | LM358 | SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | LM2903 | SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 3 | LM13700 | SOIC-16_3.9x9.9mm_P1.27mm | U7, U8, U9 |
| 1 | TL431 | SOT-23 | U10 |
| 1 | TL431DBZ | SOT-23 | U12 |
| 1 | PW_CONN | Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J1 |
| 1 | SW_CONN | IDC-Header_2x08_P2.54mm_Vertical | J2 |
| 1 | CONN_SIG | IDC-Header_2x05_P2.54mm_Vertical | J3 |
| 1 | LED2color_CONN | Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J4 |
| 1 | LED | Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J5 |
| 1 | Conn_01x02_Socket | SolderWire-0.5sqmm_1x02_P4.6mm_D0.9mm_OD2.1mm | J6 |
| 1 | Conn_01x05_Socket | SolderWire-0.5sqmm_1x05_P4.6mm_D0.9mm_OD2.1mm | J7 |
| 1 | PHYSW_CONN | IDC-Header_2x05_P2.54mm_Vertical | J10 |
| 2 | Jumper_2_Small_Open | R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | JP1, JP2 |
| 3 | 100KA | Potentiometer_Alps_RK09K_Single_Vertical | RV1, RV2, RV3 |
| 1 | MMSD4148 | D_SOD-123 | D1 |
| 1 | BAT54S | SOT-23 | D2 |
| 1 | RED | LED_D3.0mm | D3 |
Show 33 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RED_GREEN | LED_D3.0mm-3 | D4 |
| 4 | 2.2n, 1% | C_Rect_L7.2mm_W2.5mm_P5.00mm | C1, C2, C3, C4 |
| 12 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6, C7, C8, C15, C16, C17, C19 +4 |
| 6 | 22u, NP | CP_Radial_D10.0mm_P5.00mm | C9, C10, C11, C12, C21, C22 |
| 1 | 10u, NP | CP_Radial_D8.0mm_P3.50mm | C13 |
| 1 | 1u, film | C_Rect_L7.5mm_W6.5mm_P5.00mm | C14 |
| 1 | 100n, film | C_Rect_L7.0mm_W3.5mm_P5.00mm | C18 |
| 14 | 4K7 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R7, R8, R9, R37, R39 +6 |
| 4 | 22M | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5, R10, R11 |
| 15 | 10K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R12, R13, R14, R15, R16, R17, R18 +7 |
| 6 | 27K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R23, R24, R55, R56, R73, R74 |
| 12 | 2K2 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R25, R26, R46, R49, R57, R58, R64, R67 +4 |
| 6 | 12K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R27, R28, R59, R60, R77, R78 |
| 12 | 470 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R29, R44, R48, R50, R61, R62, R66, R68 +4 |
| 2 | 220K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R30, R98 |
| 1 | 47K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R31 |
| 1 | 100K, TH | R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R32 |
| 2 | 100K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R33, R99 |
| 1 | 1K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R34 |
| 1 | 1M, TH | R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R35 |
| 1 | 10R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R36 |
| 1 | 1M | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R38 |
| 5 | 39K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R40, R51, R52, R69, R71 |
| 1 | 680R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R41 |
| 4 | 68K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R43, R87, R88, R100 |
| 6 | 150K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R45, R47, R63, R65, R81, R83 |
| 2 | 3K3 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R82, R85 |
| 1 | 8K2 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R91 |
| 1 | 5K6 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R93 |
| 1 | 18K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R94 |
| 1 | 33K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R95 |
| 1 | 330K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R96 |
| 1 | 680K, TH | R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R97 |
Main design files
The KiCad project lives in the yminp/dj-filter-fx repository on GitHub; these links point at the commit this page was built from.
Main: common questions
How big is the Main PCB?
The Main measures 148.6 × 82 mm, has 2 copper layers and is 1.580794 mm thick.
How many components are on the Main?
156 components, from 53 distinct parts. The full bill of materials is listed on this page.
Where can I download the Main design files?
From the yminp/dj-filter-fx repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Main design in my own project?
Yes, under the terms of its CERN-OHL-W-2.0 license, which yminp chose for the repository.
More boards in dj-filter-fx
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687