Esp32-gps

yvolodym·esp32-gps·kicad/esp32-gps.kicad_pcb

Esp32-gps PCB layout, top view — open source RP2040/RP2350 board by yvolodym

About the Esp32-gps PCB

Esp32-gps is an open source RP2040/RP2350 PCB design by yvolodym, published on GitHub under the CERN-OHL-S-2.0 license. It is a 4-layer board measuring 50 × 50 mm, with 59 components from 38 distinct parts.

Its main chip is the GP-01, from the RP2040/RP2350 family. Other key parts include the DW01A, TP4056-42-ESOP8, U8205A, ESP32-PICO-V3 and LTC4412. By type, the board carries 21 resistors, 13 capacitors, 11 ICs, 5 diodes, 3 transistors and 3 connectors.

It belongs with the rf & radio, iot & wireless and power & battery designs in this gallery.

From the project

ESP32-basierter GNSS/GPS-Empfänger mit Bluetooth-Ausgabe der Positionsdaten (KiCad-Hardwaredesign)

Akku-betriebenes GNSS-Empfänger-Board auf Basis des ESP32. Ein GNSS-Modul (GPS/BDS/GLONASS) liefert die Positionsdaten, der ESP32 liest sie über UART aus und stellt sie per Bluetooth für andere Geräte (z. B. Smartphone, Laptop, Navigationssoftware) bereit.

- ESP32-PICO-V3 als zentrale MCU (WLAN + Bluetooth Classic/BLE integriert) - Ai-Thinker GP-01 GNSS-Modul (GPS/BDS/GLONASS) mit externer Antenne (Koax-Anschluss) - USB-C für Programmierung (über integrierten CH340C USB-UART-Wandler) und zum Laden - Li-Ion-Akkubetrieb (18650) mit Lade-IC TP4056, Akkuschutz (DW01A) und automatischer…

Main components on the Esp32-gps

Esp32-gps bill of materials (BOM)

59 components, 38 distinct parts.

QtyPartRefs
1
GP-01
U1
1
DW01A
U2
1
TP4056-42-ESOP8
U3
1
U8205A
U4
1
ESP32-PICO-V3
U5
1
LTC4412
U6
1
CP2102N-Axx-xQFN28
U7
1
AP2112K-3.3
U8
1
USBLC6-2P6
U9
1
Switch
U10
1
Battery
U11
1
Si2319CDS
Q1
2
BCW66G
Q2, Q3
2
MHF4
J1, J2
1
USB_C_Plug_USB2.0
P1
1
BOOT
SW1
1
RESET
SW2
1
LED_RED
D1
1
blue
D2
1
green
D3
Show 18 more
QtyPartRefs
1
LED_GREEN
D4
1
SS14
D5
1
1,6nH
L1
4
10µF
C1, C3, C6, C12
6
100nF
C2, C4, C5, C7, C11, C13
1
4,7µF
C8
1
2,7pF
C9
1
4,7pF
C10
1
220K
R1
1
2K
R2
1
100K
R3
1
100
R4
5
10K
R5, R8, R12, R16, R19
5
1K
R6, R7, R10, R11, R17
1
47.5K
R9
3
470
R13, R14, R15
2
5.1k
R18, R21
1
22.1K
R20

Esp32-gps design files

The KiCad project lives in the yvolodym/esp32-gps repository on GitHub; these links point at the commit this page was built from.

Esp32-gps: common questions

What microcontroller does the Esp32-gps use?

The Esp32-gps is built around the GP-01, from the RP2040/RP2350 family.

How big is the Esp32-gps PCB?

The Esp32-gps measures 50 × 50 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Esp32-gps?

59 components, from 38 distinct parts. The full bill of materials is listed on this page.

Where can I download the Esp32-gps design files?

From the yvolodym/esp32-gps repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Esp32-gps design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which yvolodym chose for the repository.

Can I test firmware for the Esp32-gps without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards