Zaza mk1-motor driver
zaza-the-robot·zaza-mk1-motor-driver
About the Zaza mk1-motor driver PCB
Zaza mk1-motor driver is an open source PCB design by zaza-the-robot, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 108 × 57.5 mm, with 77 components from 38 distinct parts.
Other key parts include the 74HC00, LM358, LM555, 74HC138 and 74HC595. By type, the board carries 30 resistors, 14 capacitors, 11 diodes, 10 ICs, 6 connectors and 1 transistor.
It belongs with the robotics & motion designs in this gallery.
Main components on the Zaza mk1-motor driver
Zaza mk1-motor driver bill of materials (BOM)
77 components, 38 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74HC00 | SOIC-14_3.9x8.7mm_Pitch1.27mm | U1 |
| 1 | LM358 | SOIC-8_3.9x4.9mm_Pitch1.27mm | U3 |
| 1 | LM555 | SOIC-8_3.9x4.9mm_Pitch1.27mm | U4 |
| 1 | 74HC138 | SOIC-16_3.9x9.9mm_Pitch1.27mm | U5 |
| 1 | 74HC595 | SOIC-16_3.9x9.9mm_Pitch1.27mm | U6 |
| 1 | AT25 | SOIC-8_3.9x4.9mm_Pitch1.27mm | U8 |
| 1 | ADS1018 | MSOP-10_3x3mm_Pitch0.5mm | U9 |
| 1 | LM7805 | SOT-223-3Lead_TabPin2 | U10 |
| 2 | IRS2003 | SOIC-8_3.9x4.9mm_Pitch1.27mm | U100, U200 |
| 1 | NZT605 | SOT-223-3Lead_TabPin2 | Q1 |
| 1 | CONN_02X01 | bornier2 | J4 |
| 1 | U | Pin_Header_Straight_2x01_Pitch2.54mm | J5 |
| 1 | V | Pin_Header_Straight_2x01_Pitch2.54mm | J6 |
| 1 | CAL_EN | Pin_Header_Straight_2x01_Pitch2.54mm | J7 |
| 1 | CONN_01X06 | Pin_Header_Straight_1x06_Pitch2.54mm | J8 |
| 1 | MX120G | Molex_MX120G_02x06_3.5mm_36783-1201 | J200 |
| 1 | 100mA | R_1206 | F1 |
| 4 | DMN10 | SOT-404-thermal-vias | QA1, QB1, QC1, QD1 |
| 1 | 1N5711 | D_MiniMELF_Standard | D1 |
| 1 | BAR43 | SOT-23 | D3 |
Show 18 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 15.6V | D_SMA_Standard | D6, D103, D203 |
| 6 | 1N... | D_MiniMELF_Standard | D100, D101, D102, D200, D201, D202 |
| 1 | 1n | C_0805 | C1 |
| 1 | 100p | C_0805 | C2 |
| 1 | 1uF 100V | CP_Radial_D5.0mm_P2.00mm | C3 |
| 8 | 1uF | C_0805 | C6, C7, C8, C9, C11, C12, C13, C14 |
| 1 | 100u 100V | CP_Axial_L29.0mm_D16.0mm_P35.00mm_Horizontal | C15 |
| 2 | 220n | C_0805 | C100, C200 |
| 4 | 0R | R_0805 | R1, R2, R103, R203 |
| 8 | 10k | R_0805 | R3, R10, R12, R20, R100, R101, R200, R201 |
| 1 | 47k | R_0805 | R4 |
| 4 | 1M | R_0805 | R5, R6, R7, R8 |
| 1 | 10 mOhm | R_Axial_Power_L25.0mm_W6.4mm_P27.94mm | R9 |
| 2 | 50R | R_2010 | R11, R13 |
| 1 | 180k | R_0805 | R14 |
| 3 | 3.3k | R_0805 | R15, R16, R19 |
| 2 | 100k | R_0805 | R17, R18 |
| 4 | 1k | R_0805 | R102, R104, R202, R204 |
Zaza mk1-motor driver design files
The KiCad project lives in the zaza-the-robot/zaza-mk1-motor-driver repository on GitHub; these links point at the commit this page was built from.
Zaza mk1-motor driver: common questions
How big is the Zaza mk1-motor driver PCB?
The Zaza mk1-motor driver measures 108 × 57.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Zaza mk1-motor driver?
77 components, from 38 distinct parts. The full bill of materials is listed on this page.
Where can I download the Zaza mk1-motor driver design files?
From the zaza-the-robot/zaza-mk1-motor-driver repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Zaza mk1-motor driver design in my own project?
Yes, under the terms of its GPL-3.0 license, which zaza-the-robot chose for the repository.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979