Smartwatch-HackClub-Fallen-Project

aAhmer1677·Smartwatch-HackClub-Fallen-Project·PCB and Schematics/Smartwatch_fallen.kicad_sch

This repository ships a schematic but no board layout.

About the Smartwatch-HackClub-Fallen-Project PCB

Smartwatch-HackClub-Fallen-Project is an open source ESP32 PCB design by aAhmer1677, published on GitHub under the MIT license. It is a board, with 47 components from 32 distinct parts.

Its main chip is the ESP32-S3-WROOM-2-N32R16V, from the ESP32 family. Other key parts include the BQ24230RGT, TPS2116DRL, ICM-20948, USBLC6-2SC6 and TPS63802DLAR. By type, the board carries 14 capacitors, 13 resistors, 8 ICs, 3 connectors, 3 switches and 1 module.

It belongs with the wearables and iot & wireless designs in this gallery.

From the project

An open-source smartwatch built from scratch for the Hack Club Fallen. It runs on bare-metal ESP32-S3 with [[additional functions to be added]]

An open-source smartwatch built from scratch for the Hack Club Fallen. It runs on bare-metal ESP32-S3 with [[additional functions to be added]]

This smartwatch could: - Launch a private gateway: you and your friends can then play in class. - Allow WIFI Connection to Your Mobile: useful for that day you forgot your phone (ps. calling with no additional sim card). - and much more

Main components on the Smartwatch-HackClub-Fallen-Project

Smartwatch-HackClub-Fallen-Project bill of materials (BOM)

47 components, 32 distinct parts.

QtyPartRefs
1
ESP32-S3-WROOM-2-N32R16V
IC1
1
BQ24230RGT
U1
1
TPS2116DRL
U2
1
ICM-20948
U3
1
USBLC6-2SC6
U4
1
TPS63802DLAR
U5
1
TLV75518PDBV
U6
1
PCA9306
U7
1
Motor_DC
M1
1
AO3400A
Q2
1
Wireless Charging Module
J1
1
USB_C_Receptacle_USB2.0_16P
J2
1
LCD_FPC_12PIN
J3
1
Battery_Cell
BT1
1
482020514001
S2
2
SW_Push
SW1, SW2
1
Thermistor_NTC
TH1
1
D_Schottky
D1
1
0.47uH
L1
6
1uF
C3, C8, C9, C10, C12, C13
Show 12 more
QtyPartRefs
3
10uF
C4, C5, C6
1
22uF
C7
4
100nF
C11, C14, C15, C16
2
5.1k
R1, R3
1
3.06k
R4
1
4.32k
R5
1
2.2k
R6
1
510k
R7
1
91k
R8
1
56k
R9
2
100k
R10, R11
3
10k
R12, R13, R14

Smartwatch-HackClub-Fallen-Project design files

The KiCad project lives in the aAhmer1677/Smartwatch-HackClub-Fallen-Project repository on GitHub; these links point at the commit this page was built from.

Smartwatch-HackClub-Fallen-Project: common questions

What microcontroller does the Smartwatch-HackClub-Fallen-Project use?

The Smartwatch-HackClub-Fallen-Project is built around the ESP32-S3-WROOM-2-N32R16V, from the ESP32 family.

How many components are on the Smartwatch-HackClub-Fallen-Project?

47 components, from 32 distinct parts. The full bill of materials is listed on this page.

Where can I download the Smartwatch-HackClub-Fallen-Project design files?

From the aAhmer1677/Smartwatch-HackClub-Fallen-Project repository on GitHub, which has the schematic; the links under Design files point to each one.

Can I use the Smartwatch-HackClub-Fallen-Project design in my own project?

Yes, under the terms of its MIT license, which aAhmer1677 chose for the repository.

Can I test firmware for the Smartwatch-HackClub-Fallen-Project without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards