11 open source boards using the TLV75518PDBV
Real designs built with the TLV75518PDBV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32 Bus Pirate Dock
AndreiVladescu
80 × 73.8 mm33 parts4LCERN-OHL-W-2.083RP2040/RP2350
Dev real
iamdarshg
105 × 105 mm310 parts4LNo license1FPGA
FPGBA
teejaytiger
78.8 × 40 mm65 parts2LNo license0RP2040/RP2350
EnvOpenAudio
Envious-Data
21.3 × 68.7 mm62 parts2LGPL-3.00- schematic only · 124 partsFPGA
5150uvc
clacktronics
124 partsNo license0 - schematic only · 47 partsESP32
Smartwatch-HackClub-Fallen-Project
aAhmer1677
47 partsMIT0 RP2040/RP2350
Fpga extension
matgla
47.5 × 50 mm120 parts6LMIT10STM32
Healthylink compute v5
Protocentral
50 × 60 mm113 parts6LCERN-OHL-P-2.02RP2040/RP2350
Dev real production
iamdarshg
105 × 105 mm310 parts4LNo license1Nref ports one
cetola
88 × 35.9 mm146 parts4LNo license0FPGA
Mainboard
teejaytiger
78.8 × 40 mm55 parts4LNo license0
How designs wire the TLV75518PDBV
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TLV75518PDBV connects to, and the resistors, capacitors and other passives placed on it.
- The IN pin is tied to 5V on 7 of 7 designs.
- The OUT pin is tied to 1.8V on 7 of 7 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INpin 1 | Connected to: 5V 100% | — |
| GNDpin 2 | Connected to: GND 100% | — |
| NCpin 4 | Connected to: Not connected 100% | — |
| OUTpin 5 | Connected to: 1.8V 100% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESP32 Bus Pirate Dock by AndreiVladescu, Fpga extension by matgla, Healthylink compute v5 by Protocentral and Dev real by iamdarshg.
The TLV75518PDBV in open source designs
The gallery holds 11 open source boards using the TLV75518PDBV from 9 GitHub repositories; a typical one measures about 78.8 × 60 mm and carries around 113 components.
78% use four copper layers or more, and 45% carry an open source license.
The most starred is ESP32 Bus Pirate Dock by AndreiVladescu.
Parts used alongside the TLV75518PDBV
Microcontrollers on boards using the TLV75518PDBV
What boards using the TLV75518PDBV are built for
TLV75518PDBV: common questions
Where can I find a TLV75518PDBV reference design?
Each of the 11 boards on this page is a real design using the TLV75518PDBV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TLV75518PDBV IN pin connected?
The IN pin is tied to 5V on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the TLV75518PDBV.
How is the TLV75518PDBV OUT pin connected?
The OUT pin is tied to 1.8V on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the TLV75518PDBV.
What parts are used alongside the TLV75518PDBV?
The USBLC6-2SC6, TLV320AIC3100, TLV62569DBV, TPS2116DRL and TXS0108EPW appear in the most repositories here.
Which microcontrollers do boards using the TLV75518PDBV use?
Most are built on RP2040/RP2350 (4), FPGA (3), ESP32 (1) and STM32 (1).
How big is a typical board using the TLV75518PDBV?
The median is 78.8 × 60 mm, and 22% are two-layer designs.
What is the most popular open source board using the TLV75518PDBV?
By GitHub stars, ESP32 Bus Pirate Dock by AndreiVladescu, with 83 stars.
Can I simulate one of these boards using the TLV75518PDBV before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.