Yet-Another-Nixie-Clock-Processing
afonsus1997·Yet-Another-Nixie-Clock·Hardware/Yet-Another-Nixie-Clock-Processing/Yet-Another-Nixie-Clock-Processing.kicad_pcb
About the Yet-Another-Nixie-Clock-Processing PCB
Yet-Another-Nixie-Clock-Processing is an open source ESP32 PCB design by afonsus1997, published on GitHub under the MIT license. It is a 4-layer board measuring 59.7 × 70 mm, with 59 components from 31 distinct parts.
Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the CP2102N-Axx-xQFN24, TPS563200, USBLC6-2P6, DS3231M and MAX1771xSA. By type, the board carries 19 capacitors, 19 resistors, 6 ICs, 5 connectors, 3 transistors and 3 switches.
It belongs with the displays & leds designs in this gallery.
Main components on the Yet-Another-Nixie-Clock-Processing
Yet-Another-Nixie-Clock-Processing bill of materials (BOM)
59 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CP2102N-Axx-xQFN24 | QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U1 |
| 1 | TPS563200 | SOT-23-6 | U2 |
| 1 | USBLC6-2P6 | SOT-666 | U3 |
| 1 | DS3231M | SOIC-16W_7.5x10.3mm_P1.27mm | U4 |
| 1 | ESP32-WROOM-32 | ESP32-WROOM-32 | U5 |
| 1 | MAX1771xSA | SO-8_3.9x4.9mm_P1.27mm | U6 |
| 2 | MMBT2222A | SOT-23 | Q1, Q2 |
| 1 | Q_NMOS | TO-263-2 | Q3 |
| 1 | PJ-002BH | CUI_PJ-002BH | J1 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | J2 |
| 1 | JTAG | IDC-Header_2x05_P2.54mm_Vertical | J3 |
| 2 | Conn_02x06_Odd_Even | PinHeader_2x06_P2.54mm_Vertical_SMD | J10, J11 |
| 1 | 5k | Potentiometer_Bourns_3314G_Vertical | RV1 |
| 3 | SW_MEC_5E | SW_SKRPACE010 | SW1, SW2, SW3 |
| 1 | D_Small | D_SMB_Handsoldering | D3 |
| 1 | 22uH | L_APV_APH0615 | L1 |
| 1 | 100uH / 2.5 A | L_APV_APH0840 | L2 |
| 4 | 10uF | C_0603_1608Metric | C1, C2, C6, C8 |
| 9 | 100nF | C_0603_1608Metric | C3, C4, C5, C7, C12, C13, C14, C16 +1 |
| 3 | 22uF | C_0603_1608Metric | C9, C10, C11 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100uF | CP_EIA-7343-15_Kemet-W_HandSolder | C15 |
| 1 | 4.7uF | C_Elec_8x10.2 | C17 |
| 1 | 100nF | C_1210_3225Metric | C18 |
| 7 | 10k | R_0603_1608Metric | R1, R2, R3, R7, R12, R13, R17 |
| 2 | 5.1k | R_0402_1005Metric | R4, R5 |
| 1 | 33.2k | R_0603_1608Metric | R6 |
| 4 | 1k | R_0603_1608Metric | R9, R10, R11, R21 |
| 2 | 4.7k | R_0603_1608Metric | R14, R15 |
| 1 | 1.5M | R_0805_2012Metric | R18 |
| 1 | 50m | R_1206_3216Metric | R19 |
| 1 | 10k | R_0805_2012Metric | R20 |
Yet-Another-Nixie-Clock-Processing design files
The KiCad project lives in the afonsus1997/Yet-Another-Nixie-Clock repository on GitHub; these links point at the commit this page was built from.
Yet-Another-Nixie-Clock-Processing: common questions
What microcontroller does the Yet-Another-Nixie-Clock-Processing use?
The Yet-Another-Nixie-Clock-Processing is built around the ESP32-WROOM-32, from the ESP32 family.
How big is the Yet-Another-Nixie-Clock-Processing PCB?
The Yet-Another-Nixie-Clock-Processing measures 59.7 × 70 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Yet-Another-Nixie-Clock-Processing?
59 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the Yet-Another-Nixie-Clock-Processing design files?
From the afonsus1997/Yet-Another-Nixie-Clock repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Yet-Another-Nixie-Clock-Processing design in my own project?
Yes, under the terms of its MIT license, which afonsus1997 chose for the repository.
Can I test firmware for the Yet-Another-Nixie-Clock-Processing without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Yet-Another-Nixie-Clock
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k