ENKU-Base reader
aliaksei-lameyka·ENKU-Base-reader·hardware/mainboard/kicad/enku-mainboard-r0.1.kicad_pcb
About the ENKU-Base reader PCB
ENKU-Base reader is an open source ESP32 PCB design by aliaksei-lameyka, published on GitHub. It is a 4-layer board measuring 54 × 94 mm, with 103 components from 55 distinct parts.
Its main chip is the ESP32-S3-WROOM-1-N16R8, from the ESP32 family. Other key parts include the TPS2121, BQ25185DLHR, TPS63802DLAR, BMI270 and DRV5032FBDBZR. By type, the board carries 46 resistors, 33 capacitors, 7 ICs, 6 switches, 5 connectors and 3 diodes.
It belongs with the iot & wireless designs in this gallery.
From the project
Editable Base R0.1 source is stored in kicad/.
Editable Base R0.1 source is stored in kicad/.
The current board is an engineering first-spin and must not be treated as a production release until the release checklist in docs/validation.md is closed.
Pro-only frontlight and wireless-charging circuitry are intentionally not part of this Base repository.
Main components on the ENKU-Base reader
ENKU-Base reader bill of materials (BOM)
103 components, 55 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1-N16R8 | ESP32-S3-WROOM-1 | U1 |
| 1 | TPS2121 | TPS2121_RUX0012A | U2 |
| 1 | BQ25185DLHR | BQ25185_DLH0010A | U3 |
| 1 | TPS63802DLAR | TPS63802_DLA0010A | U4 |
| 1 | BMI270 | BMI270_Bosch_LGA14 | U5 |
| 1 | DRV5032FBDBZR | SOT-23 | U6 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U8 |
| 1 | IRLML6346TRPBF | SOT-23 | Q1 |
| 1 | 1S LiPo + NTC | JST_PH_3_PLACEMENT | J1 |
| 1 | Hirose DM3AT-SF-PEJM5 | MICROSD_DM3AT_ENKU | J2 |
| 1 | FH34SRJ-24S-0.5SH(50) | FH34SRJ-24S-0.5SH | J3 |
| 1 | GCT USB4105-GF-A-120 | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J5 |
| 1 | 4-pin pogo dock | DOCK_POGO_4 | J6 |
| 1 | HARD POWER | HARD_POWER_SWITCH_PLACEMENT | SW1 |
| 1 | BOOT / RECOVERY | SW_SPST_TL3342 | SW2 |
| 1 | BTN_L1 | READING_BUTTON_PLACEMENT | SW3 |
| 1 | BTN_L2 | READING_BUTTON_PLACEMENT | SW4 |
| 1 | BTN_R1 | READING_BUTTON_PLACEMENT | SW5 |
| 1 | BTN_R2 | READING_BUTTON_PLACEMENT | SW6 |
| 3 | MBR0530 | D_SOD-123 | D1, D2, D3 |
Show 35 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0.47uH DFE201612E-R47M=P2 | Murata_DFE201612E | L1 |
| 1 | 10uH TYS5040100M-10 | TYS5040_5x5 | L2 |
| 8 | 100nF | C_0603_1608Metric | C1, C10, C14, C17, C18, C19, C20, C21 |
| 6 | 10uF 10V | C_0805_2012Metric | C2, C3, C4, C9, C13, C16 |
| 8 | 4.7uF 25V | C_0805_2012Metric | C5, C24, C25, C26, C27, C28, C29, C31 |
| 1 | 100nF 25V | C_0603_1608Metric | C6 |
| 1 | 10uF 25V | C_0805_2012Metric | C7 |
| 1 | 4.7uF 10V | C_0805_2012Metric | C8 |
| 2 | 22uF 10V | C_0805_2012Metric | C11, C12 |
| 1 | 1uF | C_0603_1608Metric | C15 |
| 2 | 1uF 25V | C_0603_1608Metric | C22, C23 |
| 1 | 1uF 25V X7R | C_0805_2012Metric | C30 |
| 1 | 4.7nF | C_0603_1608Metric | C35 |
| 1 | 10nF | C_0603_1608Metric | C36 |
| 1 | 100k 1% | R_0603_1608Metric | R1 |
| 4 | 0R STRAP | R_0603_1608Metric | R2, R3, R4, R5 |
| 5 | 0R | R_0603_1608Metric | R6, R7, R19, R28, R29 |
| 1 | 18k 1% | R_0603_1608Metric | R8 |
| 1 | 1k 1% | R_0603_1608Metric | R9 |
| 6 | 100k | R_0603_1608Metric | R10, R13, R16, R35, R36, R69 |
| 4 | 10k | R_0603_1608Metric | R11, R17, R18, R68 |
| 1 | 10k DNP | R_0603_1608Metric | R12 |
| 1 | 511k 1% | R_0603_1608Metric | R14 |
| 1 | 91k 1% | R_0603_1608Metric | R15 |
| 5 | 0R (22R tune) | R_0603_1608Metric | R20, R21, R22, R64, R65 |
| 1 | 47k | R_0603_1608Metric | R23 |
| 2 | 4.7k | R_0603_1608Metric | R24, R25 |
| 1 | 2M 1% | R_0603_1608Metric | R26 |
| 1 | 680k 1% | R_0603_1608Metric | R27 |
| 5 | 22R | R_0603_1608Metric | R30, R31, R32, R33, R34 |
| 1 | 2.2R 1% 0805 | R_0805_2012Metric | R37 |
| 1 | 1M 1% | R_0603_1608Metric | R38 |
| 2 | 5.1k 1% | R_0603_1608Metric | R62, R63 |
| 1 | 1M | R_0603_1608Metric | R66 |
| 1 | 0R DNP | R_0603_1608Metric | R67 |
ENKU-Base reader design files
The KiCad project lives in the aliaksei-lameyka/ENKU-Base-reader repository on GitHub; these links point at the commit this page was built from.
ENKU-Base reader: common questions
What microcontroller does the ENKU-Base reader use?
The ENKU-Base reader is built around the ESP32-S3-WROOM-1-N16R8, from the ESP32 family.
How big is the ENKU-Base reader PCB?
The ENKU-Base reader measures 54 × 94 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the ENKU-Base reader?
103 components, from 55 distinct parts. The full bill of materials is listed on this page.
Where can I download the ENKU-Base reader design files?
From the aliaksei-lameyka/ENKU-Base-reader repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ENKU-Base reader design in my own project?
The repository has no license, so all rights stay with aliaksei-lameyka. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ENKU-Base reader without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k