14 open source boards using the TPS2121
Real designs built with the TPS2121, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
DiveCAN Head2
QuickRecon
97.1 × 26 mm135 parts4LMIT13ESP32
Sonar
QuickRecon
74.9 × 47 mm74 parts2LMIT2STM32
UPS-2 PowerSupply HW
ECOM-Engineering
65 × 56.5 mm59 parts2LCustom license2ESP32
ENKU-Base reader
aliaksei-lameyka
54 × 94 mm103 parts4LNo license1FPGA
Zynq sdr dongle
SunnyYoshimitsu
75.3 × 94.2 mm277 parts6LGPL-3.00RP2040/RP2350
Berryboard
curtisgalloway
56 × 65 mm58 parts2LNo license0ESP32
Alaska-Deluxe-Generator
thehelmetedheinsight
75 × 55 mm54 parts2LGPL-3.00ESP32
MIDAS MK1
ISSUIUC
60 × 100 mm201 parts4LNo license31ESP32
MIDAS MK1.1
ISSUIUC
60 × 100 mm199 parts4LNo license31ESP32
MIDAS MK2.1
ISSUIUC
45 × 100 mm186 parts4LNo license31ESP32
MIDAS Mini MK1
ISSUIUC
25 × 80 mm122 parts4LNo license31RP2040/RP2350
Stargazer Camera Board
ISSUIUC
40 × 60 mm110 parts2LNo license31ESP32
Stargazer Camera Board MK2.1
ISSUIUC
40 × 40 mm108 parts4LNo license31ESP32
MotorBoard MK1
ISSUIUC
65 × 70 mm59 parts4LNo license31
How designs wire the TPS2121
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the TPS2121 connects to, and the resistors, capacitors and other passives placed on it.
- The IN2 pin is tied to 5V on 7 of 8 designs.
- The SS pin has a capacitor to GND on 5 of 8 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| IN2pin 2 | Connected to: 5V 88% | — |
| CP2pin 3 | Connected to: GND 50% · a signal 38% |
|
| OV1pin 5 | Connected to: Signal 63% · GND 38% |
|
| PR1pin 6 | Connected to: Signal 50% · GND 38% |
|
| ILIMpin 10 | Connected to: Signal 63% |
|
| SSpin 11 | Connected to: Signal 75% |
|
| GNDpin 12 | Connected to: GND 86% | — |
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Stargazer Camera Board MK2.1 by ISSUIUC, DiveCAN Head2 by QuickRecon, UPS-2 PowerSupply HW by ECOM-Engineering and Sonar by QuickRecon.
The TPS2121 in open source designs
The gallery holds 14 open source boards using the TPS2121 from 8 GitHub repositories; a typical one measures about 60 × 67.5 mm and carries around 109 components.
64% use four copper layers or more, and 29% carry an open source license.
The most starred is MIDAS MK1 by ISSUIUC.
Parts used alongside the TPS2121
Microcontrollers on boards using the TPS2121
What boards using the TPS2121 are built for
TPS2121: common questions
Where can I find a TPS2121 reference design?
Each of the 14 boards on this page is a real design using the TPS2121. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TPS2121 IN2 pin connected?
The IN2 pin is tied to 5V on 7 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the TPS2121.
How is the TPS2121 SS pin connected?
The SS pin has a capacitor to GND on 5 of 8 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 8 open source designs using the TPS2121.
What parts are used alongside the TPS2121?
The C2871143, C468235 and MMC5983MA appear in the most repositories here.
Which microcontrollers do boards using the TPS2121 use?
Most are built on ESP32 (9), RP2040/RP2350 (2), STM32 (2) and FPGA (1).
How big is a typical board using the TPS2121?
The median is 60 × 67.5 mm, and 36% are two-layer designs.
What is the most popular open source board using the TPS2121?
By GitHub stars, MIDAS MK1 by ISSUIUC, with 31 stars.
Can I simulate one of these boards using the TPS2121 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.