TS VDAC A4
andrewinsidelazarev·VDAC4·Hardware/A4/KiCad/TS_VDAC_A4.kicad_pcb
About the TS VDAC A4 PCB
TS VDAC A4 is an open source ESP32 PCB design by andrewinsidelazarev, published on GitHub under the MIT license. It is a 4-layer board measuring 58 × 75 mm, with 51 components from 24 distinct parts.
Its main chip is the ESP32-S3-Zero-N8R8-M, from the ESP32 family. Other key parts include the SN74LVC257APWR, SN74LVC245APWR, SN74LVC1G97DBVR, SN74LVC1G00DBVR and TXU0101DBVR. By type, the board carries 23 resistors, 11 capacitors, 8 ICs, 3 modules, 3 connectors and 2 diodes.
It belongs with the audio and dev boards & breakouts designs in this gallery.
From the project
Графический сопроцессор + HDMI конвертер для ZX Evolution / TS-Config + сетевая карта + звуковой модуль
Плата-носитель VDAC4 для ZX Evolution (TS-Config): 58×75 мм, 4 слоя. Сверху на гнёздах стоят Tang Nano 20K (A1), Waveshare ESP32-S3-Zero-N8R8 (A2) и модуль ЦАП GY-PCM5102 (A3); снизу — гнездо IDE-40 (J1), которым плата надевается прямо на разъём IDE Evo. Питание — от кабеля питания дисковода (J5). Блок-схема — в Docs.
Всё, что ниже, относится к обеим ревизиям: разводка платы, перемычки и разъёмы у них одинаковые.

Main components on the TS VDAC A4
TS VDAC A4 bill of materials (BOM)
51 components, 24 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | SN74LVC257APWR Texas Instruments | TSSOP-16_4.4x5mm_P0.65mm | U1, U2 |
| 1 | SN74LVC245APWR SN74LVC245APW Texas Instruments | TSSOP-20_4.4x6.5mm_P0.65mm | U3 |
| 1 | SN74LVC1G97DBVR SN74LVC1G97 Texas Instruments | SOT-23-6 | U6 |
| 1 | SN74LVC1G00DBVR Texas Instruments | SOT-23-5 | U7 |
| 2 | TXU0101DBVR Texas Instruments | SOT-23-6 | U8, U11 |
| 1 | TLV75533PDBVR Texas Instruments | SOT-23-5 | U10 |
| 1 | Tang Nano 20K Sipeed | Tang_Nano_20K_2x1x20_P2.54mm | A1 |
| 1 | ESP32-S3-Zero-N8R8-M Waveshare | ESP32-S3-Zero_2x1x09_P2.54mm | A2 |
| 1 | GY-PCM5102 TZT GY-PCM5102 I2S TZT | GY_PCM5102_32x17_Provisional | A3 |
| 1 | 2.54-2*20 TS-PORT40 ZHOURI | PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | PZ254V-11-04P J_AUDIO L G G R XFCN | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | 171826-4 FDD NC G G +5 TE Connectivity | TE_171826-4_Horizontal_1x04_P2.50mm | J5 |
| 1 | SMD1812P200TF16 2A hold RUILON(Shenzhen Ruilongyuan Elec) | Fuse_1812_4532Metric | F1 |
| 2 | PMEG3050EP,115 PMEG3050EP Nexperia | D_SOD-128 | D1, D2 |
| 1 | CL21B105KBFNNNE 1u Samsung Electro-Mechanics | C_0805_2012Metric | C4 |
| 1 | CL21A475KAQNNNE 4.7u Samsung Electro-Mechanics | C_0805_2012Metric | C5 |
| 9 | CC0805KRX7R9BB104 100n YAGEO | C_0805_2012Metric | C6, C7, C8, C11, C12, C13, C15, C17 +1 |
| 8 | 0805W8F4702T5E 47k UNI-ROYAL(Uniroyal Elec) | R_0805_2012Metric | R1, R7, R9, R12, R13, R14, R15, R16 |
| 3 | 0805W8F1002T5E 10k UNI-ROYAL(Uniroyal Elec) | R_0805_2012Metric | R2, R3, R10 |
| 2 | 0805W8F1001T5E 1k UNI-ROYAL(Uniroyal Elec) | R_0805_2012Metric | R4, R19 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 0805W8F2702T5E 27k UNI-ROYAL(Uniroyal Elec) | R_0805_2012Metric | R17, R18 |
| 2 | 0805W8F1372T5E 13.7k UNI-ROYAL(Uniroyal Elec) | R_0805_2012Metric | R20, R22 |
| 2 | 0805W8F3402T5E 34k UNI-ROYAL(Uniroyal Elec) | R_0805_2012Metric | R21, R23 |
| 4 | YC164-JR-0747KL 4x47k YAGEO | R_Array_Convex_4x0603 | RN1, RN2, RN3, RN4 |
TS VDAC A4 design files
The KiCad project lives in the andrewinsidelazarev/VDAC4 repository on GitHub; these links point at the commit this page was built from.
TS VDAC A4: common questions
What microcontroller does the TS VDAC A4 use?
The TS VDAC A4 is built around the ESP32-S3-Zero-N8R8-M, from the ESP32 family.
How big is the TS VDAC A4 PCB?
The TS VDAC A4 measures 58 × 75 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the TS VDAC A4?
51 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the TS VDAC A4 design files?
From the andrewinsidelazarev/VDAC4 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the TS VDAC A4 design in my own project?
Yes, under the terms of its MIT license, which andrewinsidelazarev chose for the repository.
Can I test firmware for the TS VDAC A4 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in VDAC4
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k