11 open source boards using the GY-PCM5102
Real designs built with the GY-PCM5102, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP8266
TinyLlama
eivindbohler
100 × 77 mm138 parts4LGPL-3.0134ClumsyMIDI
gmcn42
65 × 56 mm21 parts2LCC-BY-SA-4.089Minisynth32
grantek
51.3 × 96.2 mm30 parts2LCC-BY-SA-4.044ESP32
TS VDAC A4
andrewinsidelazarev
58 × 75 mm51 parts4LMIT2RP2040/RP2350
PicoTracker th
alexbonhomme
91.4 × 110 mm29 parts2LNo license1ClumsyMIDI
sinitsinmike
65 × 56 mm21 parts2LCC-BY-SA-4.00STM32
MSX-ROM-Emulator
pdaehne
99.9 × 65.2 mm6 parts2LCC-BY-NC-4.00AuxPlay
Mateix10
60.5 × 55 mm3 parts2LNo license0Minisynth32-rear
grantek
31.8 × 96 mm15 parts2LCC-BY-SA-4.044ESP32
TS VDAC A5
andrewinsidelazarev
58 × 75 mm51 parts4LMIT2Raspberry Pi
Zynthian mini
zynthian
163 × 120 mm87 parts2LNo license156
How designs wire the GY-PCM5102
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the GY-PCM5102 connects to, and the resistors, capacitors and other passives placed on it.
- The SCK pin is tied to GND on 8 of 9 designs.
- The A3V3 pin is left unconnected on 7 of 8 designs.
- The FMT pin is left unconnected on 6 of 8 designs.
- The DEMP pin is left unconnected on 6 of 8 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SCKpin 1 | Connected to: GND 89% | — |
| GNDpin 5 | Connected to: GND 89% | — |
| VINpin 6 | Connected to: 5V 100% |
|
| A3V3pin 11 | Connected to: Not connected 88% | — |
| FMTpin 12 | Connected to: Not connected 75% | — |
| XSMTpin 13 | Connected to: Not connected 63% · 3.3V 25% | — |
| DEMPpin 14 | Connected to: Not connected 75% | — |
| FLTpin 15 | Connected to: Not connected 75% | — |
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Zynthian mini by zynthian, TinyLlama by eivindbohler, ClumsyMIDI by gmcn42 and Minisynth32 by grantek.
The GY-PCM5102 in open source designs
The gallery holds 11 open source boards using the GY-PCM5102 from 9 GitHub repositories; a typical one measures about 65 × 75 mm and carries around 29 components.
73% are two-layer designs, the rest use four layers or more, and 64% carry an open source license.
The most starred is Zynthian mini by zynthian.
Parts used alongside the GY-PCM5102
Microcontrollers on boards using the GY-PCM5102
What boards using the GY-PCM5102 are built for
GY-PCM5102: common questions
Where can I find a GY-PCM5102 reference design?
Each of the 11 boards on this page is a real design using the GY-PCM5102. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the GY-PCM5102 SCK pin connected?
The SCK pin is tied to GND on 8 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the GY-PCM5102.
How is the GY-PCM5102 A3V3 pin connected?
The A3V3 pin is left unconnected on 7 of 8 designs. Counted from the KiCad layouts of 9 open source designs using the GY-PCM5102.
How is the GY-PCM5102 FMT pin connected?
The FMT pin is left unconnected on 6 of 8 designs. Counted from the KiCad layouts of 9 open source designs using the GY-PCM5102.
What parts are used alongside the GY-PCM5102?
The 74HCT14, H11L1M and SSD1306 Header appear in the most repositories here.
Which microcontrollers do boards using the GY-PCM5102 use?
Most are built on ESP32 (2), ESP8266 (1), Raspberry Pi (1) and RP2040/RP2350 (1).
How big is a typical board using the GY-PCM5102?
The median is 65 × 75 mm, and 73% are two-layer designs.
What is the most popular open source board using the GY-PCM5102?
By GitHub stars, Zynthian mini by zynthian, with 156 stars.
Can I simulate one of these boards using the GY-PCM5102 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.