16 open source boards using the SN74LVC245APWR
Real designs built with the SN74LVC245APWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
MSXgoauldSD tn20k
jabadiagm
26.7 × 55.3 mm17 parts4LGPL-3.038Frob modern
tschak909
85.9 × 77.5 mm70 parts6LNo license8ESP32
PETER
dennowiggle
180 × 110 mm371 parts4LLGPL-2.14Pi1MHzLevelShifter
kgl2001
26.9 × 50.8 mm34 parts2LCC-BY-SA-4.04ESP32
TS VDAC A4
andrewinsidelazarev
58 × 75 mm51 parts4LMIT2TubeLevelShifter
kgl2001
26.9 × 50.8 mm16 parts2LCC-BY-SA-4.02S6la8
OutBlade
100 × 64 mm148 parts4LNo license1Raspberry Pi
Digichiver
frindaddy
96.9 × 88.1 mm112 parts4LMIT0RP2040/RP2350
Probelab
enkhbold470
58 × 70 mm84 parts4LCERN-OHL-S-2.00ESP32
Nescart
Keitark
99.7 × 63.9 mm84 parts6LMIT0Gbc rp2350b romcart
GOROman
57.5 × 52.5 mm29 parts4LNo license0RP2040/RP2350
ProtoA
X65
76.8 × 54 mm39 parts4LNo license8ESP32
TS VDAC A5
andrewinsidelazarev
58 × 75 mm51 parts4LMIT2RP2040/RP2350
Probelab
enkhbold470
58 × 70 mm84 parts4LCERN-OHL-S-2.00ESP32
Nescart fc Rev A-FC
Keitark
90 × 66.8 mm80 parts6LMIT0GOLD
dennowiggle
51.2 × 34.5 mm21 parts4LLGPL-2.14
How designs wire the SN74LVC245APWR
Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the SN74LVC245APWR connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 12 of 13 designs, most often 100 nF (then 2.2 µF).
- The OE pin is tied to GND on 9 of 13 designs (a signal on 4).
- The DIR pin is tied to 3.3V on 8 of 13 designs (GND on 2, a signal on 3).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| DIRpin 1 | Connected to: 3.3V 62% · GND 15% · a signal 23% | — |
| GNDpin 10 | Connected to: GND 100% | — |
| OEpin 19 | Connected to: GND 69% · a signal 31% | — |
| VCCpin 20 | Connected to: 3.3V 100% |
|
16 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MSXgoauldSD tn20k by jabadiagm, Frob modern by tschak909, ProtoA by X65 and GOLD by dennowiggle.
The SN74LVC245APWR in open source designs
The gallery holds 16 open source boards using the SN74LVC245APWR from 13 GitHub repositories; a typical one measures about 58 × 65.4 mm and carries around 61 components.
88% use four copper layers or more, and 75% carry an open source license.
The most starred is MSXgoauldSD tn20k by jabadiagm.
Parts used alongside the SN74LVC245APWR
Microcontrollers on boards using the SN74LVC245APWR
What boards using the SN74LVC245APWR are built for
SN74LVC245APWR: common questions
Where can I find a SN74LVC245APWR reference design?
Each of the 16 boards on this page is a real design using the SN74LVC245APWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SN74LVC245APWR VCC pin?
The VCC pin has a decoupling capacitor on 12 of 13 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 13 open source designs using the SN74LVC245APWR.
How is the SN74LVC245APWR OE pin connected?
The OE pin is tied to GND on 9 of 13 designs (a signal on 4). Counted from the KiCad layouts of 13 open source designs using the SN74LVC245APWR.
How is the SN74LVC245APWR DIR pin connected?
The DIR pin is tied to 3.3V on 8 of 13 designs (GND on 2, a signal on 3). Counted from the KiCad layouts of 13 open source designs using the SN74LVC245APWR.
What parts are used alongside the SN74LVC245APWR?
The AP2112K-3.3TRG1, RP2040, SN74LVC8T245PWR, USBLC6-2SC6 and W25Q128JVSIQ appear in the most repositories here.
Which microcontrollers do boards using the SN74LVC245APWR use?
Most are built on ESP32 (5), RP2040/RP2350 (3) and Raspberry Pi (1).
How big is a typical board using the SN74LVC245APWR?
The median is 58 × 65.4 mm, and 13% are two-layer designs.
What is the most popular open source board using the SN74LVC245APWR?
By GitHub stars, MSXgoauldSD tn20k by jabadiagm, with 38 stars.
Can I simulate one of these boards using the SN74LVC245APWR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.