14 open source boards using the SN74LVC1G97DBVR

Real designs built with the SN74LVC1G97DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

14 boardsClear filters|Most starred

How designs wire the SN74LVC1G97DBVR

Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the SN74LVC1G97DBVR connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC_5 pin has a decoupling capacitor on 8 of 9 designs, most often 100 nF.
GND_2pin 2Connected to: GND 100%
Y_4pin 4Connected to: Signal 100%
  • Series resistor on 33% · 10 kΩ (2), 0 Ω (1)
VCC_5pin 5Connected to: 3.3V 78% · a signal 22%
  • Decoupling capacitor on 89% · 100 nF (16)
IN2pin 6Connected to: The microcontroller 33%, NVTR01P02LT1G 22%, a connector 22%
  • Resistor to GND on 33% · 10 kΩ (2), 100 kΩ (1)

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hardware by seedhammer, TS VDAC A4 by andrewinsidelazarev, Hub by Bruhdows and Sirokko-26201-controller by krolbot.

The SN74LVC1G97DBVR in open source designs

The gallery holds 14 open source boards using the SN74LVC1G97DBVR from 10 GitHub repositories; a typical one measures about 120 × 75 mm and carries around 64 components.

69% use four copper layers or more, and 43% carry an open source license.

The most starred is Hardware by seedhammer.

Microcontrollers on boards using the SN74LVC1G97DBVR

SN74LVC1G97DBVR: common questions

Where can I find a SN74LVC1G97DBVR reference design?

Each of the 14 boards on this page is a real design using the SN74LVC1G97DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the SN74LVC1G97DBVR VCC_5 pin?

The VCC_5 pin has a decoupling capacitor on 8 of 9 designs, most often 100 nF. Counted from the KiCad layouts of 9 open source designs using the SN74LVC1G97DBVR.

What parts are used alongside the SN74LVC1G97DBVR?

The AUIR3241STR, BSC0702LSATMA1, INA300AIDSQT, NVTR01P02LT1G and SN74LVC1G00DBVR appear in the most repositories here.

Which microcontrollers do boards using the SN74LVC1G97DBVR use?

Most are built on ESP32 (4), NXP (2), STM32 (2) and RP2040/RP2350 (1).

How big is a typical board using the SN74LVC1G97DBVR?

The median is 120 × 75 mm, and 31% are two-layer designs.

What is the most popular open source board using the SN74LVC1G97DBVR?

By GitHub stars, Hardware by seedhammer, with 9 stars.

Can I simulate one of these boards using the SN74LVC1G97DBVR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part