Lb-80
apuder·TRS-IO·kicad/pmod/lb-80/lb-80.kicad_pcb
About the Lb-80 PCB
Lb-80 is an open source PCB design by apuder, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 30.6 × 21 mm, with 7 components from 6 distinct parts.
Other key parts include the 74HC4051 and SN74LVC245AN. By type, the board carries 2 ICs, 2 capacitors, 1 connector, 1 LED and 1 resistor.
It belongs with the audio and power & battery designs in this gallery.
From the project
TRS-IO gives a TRS-80 Model 1/III online capabilities and provides access to a variety of services. TRS-IO currently features the following capabilities:
TRS-IO gives a TRS-80 Model 1/III online capabilities and provides access to a variety of services. TRS-IO currently features the following capabilities:
1. Access to the RetroStore 2. FreHD emulation 3. Access to files mounted on a SMB share or located on a micro-SD card 4. Access to remote servers via TCP 5. Virtual printer support
The TRS-IO versions for the Model 1 and Model III have some additional features that are explained below. The following sections give an overview of TRS-IO as well as setup instructions. This Github repository contains the complete source code as well as the…

Main components on the Lb-80
Lb-80 bill of materials (BOM)
7 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74HC4051 | TSSOP-16_4.4x5mm_P0.65mm | U1 |
| 1 | SN74LVC245AN 74HC4051 | TSSOP-16_4.4x5mm_P0.65mm | U2 |
| 1 | 302-S501 Conn_02x06_Odd_Even | PinSocket_2x06_P2.54mm_Vertical | J1 |
| 1 | 788BS | 788BS | LED1 |
| 2 | RDER71E104K0P1H03B 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 1 | 150 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
Lb-80 design files
The KiCad project lives in the apuder/TRS-IO repository on GitHub; these links point at the commit this page was built from.
Lb-80: common questions
How big is the Lb-80 PCB?
The Lb-80 measures 30.6 × 21 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Lb-80?
7 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Lb-80 design files?
From the apuder/TRS-IO repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Lb-80 design in my own project?
Yes, under the terms of its GPL-3.0 license, which apuder chose for the repository.
More boards in TRS-IO
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kKLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k