TRS-IO-M3
apuder·TRS-IO·kicad/m3/v2.2a/TRS-IO-M3.kicad_pcb
About the TRS-IO-M3 PCB
TRS-IO-M3 is an open source PCB design by apuder, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 134 × 74.2 mm, with 40 components from 26 distinct parts.
Other key parts include the SN74LVCH8T245, SN74LVC245AN, ATF16V8B-15PU, Tango_Nano_9K and HiLetgo-ESP-32S. By type, the board carries 12 capacitors, 10 resistors, 7 connectors, 6 ICs, 3 transistors and 1 switch.
It belongs with the audio and power & battery designs in this gallery.
From the project
TRS-IO gives a TRS-80 Model 1/III online capabilities and provides access to a variety of services. TRS-IO currently features the following capabilities:
TRS-IO gives a TRS-80 Model 1/III online capabilities and provides access to a variety of services. TRS-IO currently features the following capabilities:
1. Access to the RetroStore 2. FreHD emulation 3. Access to files mounted on a SMB share or located on a micro-SD card 4. Access to remote servers via TCP 5. Virtual printer support
The TRS-IO versions for the Model 1 and Model III have some additional features that are explained below. The following sections give an overview of TRS-IO as well as setup instructions. This Github repository contains the complete source code as well as the…

Main components on the TRS-IO-M3
TRS-IO-M3 bill of materials (BOM)
40 components, 26 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SN74LVCH8T245 | TSSOP-24_4.4x7.8mm_P0.65mm | U1 |
| 1 | SN74LVC245AN SN74LVCH8T245 | TSSOP-24_4.4x7.8mm_P0.65mm | U2 |
| 1 | ATF16V8B-15PU 74LVC245 | SSOP-20_5.3x7.2mm_P0.65mm_slim | U3 |
| 1 | SN74LVC245AN LD1117DT18TR | TO-252-3_TabPin2 | U4 |
| 1 | Tango_Nano_9K | DIP-48_W22.9mm | U5 |
| 1 | HiLetgo-ESP-32S | DIP-38_W22.9mm | U6 |
| 3 | 2N7000-G 2N7002 | SOT-23 | Q1, Q2, Q3 |
| 1 | 302-S501 Conn_02x25_Odd_Even | EDGE50 | J1 |
| 1 | Conn_02x25_Odd_Even | Pin_Header_Straight_2x25_Pitch2.54mm | J2 |
| 1 | Conn_01x19 | PinHeader_1x19_P2.54mm_Vertical | J3 |
| 1 | Conn_01x02_Male | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 2 | Conn_01x06_Male | PinHeader_1x06_P2.54mm_Horizontal | J5, J6 |
| 1 | AudioJack3 | Jack_3.5mm_CUI_SJ1-3535NG_Horizontal_CircularHoles | J7 |
| 1 | 1825910-6 SW_Push | SW_PUSH_6mm_H9.5mm | SW1 |
| 1 | HV-5RGB60 LED_RCBG | LED_D5.0mm-4_RGB | D1 |
| 3 | RDER71E104K0P1H03B 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3 |
| 1 | RDER71E104K0P1H03B 10u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4 |
| 1 | 100u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5 |
| 2 | 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C7 |
| 1 | 100 | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 100N | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C10 |
| 2 | 10U | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C11, C12 |
| 3 | 100 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3 |
| 2 | 270R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5 |
| 2 | 150R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7 |
| 3 | 10K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R9, R10 |
TRS-IO-M3 design files
The KiCad project lives in the apuder/TRS-IO repository on GitHub; these links point at the commit this page was built from.
TRS-IO-M3: common questions
How big is the TRS-IO-M3 PCB?
The TRS-IO-M3 measures 134 × 74.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TRS-IO-M3?
40 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the TRS-IO-M3 design files?
From the apuder/TRS-IO repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the TRS-IO-M3 design in my own project?
Yes, under the terms of its GPL-3.0 license, which apuder chose for the repository.
More boards in TRS-IO
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kKLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k