20 open source boards using the SN74LVC245AN
Real designs built with the SN74LVC245AN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
WonderTANG
lfantoniosi
101.6 × 89.5 mm28 parts2LBSD-2-Clause75ESP8266
Stargate
leomanes
335 × 218.6 mm274 parts2LGPL-3.018MSXhdmi tn20k
jabadiagm
101.6 × 65.3 mm12 parts2LNo license17MSXmapper tn9k
jabadiagm
101.6 × 65.3 mm12 parts2LNo license12RP2040/RP2350
Copico board
thomasshanks
100 × 96 mm52 parts2LMIT7STM32
R2RDAC2026 REVIZE II
ERDALECE
246 × 120 mm919 parts6LGPL-3.05MSX LCD tn20k
jabadiagm
101.6 × 130.8 mm14 parts2LGPL-3.0568k dev
maded2
190.5 × 158.4 mm81 parts2LApache-2.04MSXproto tn9k
jabadiagm
101.6 × 95.3 mm21 parts2LGPL-3.04MSX GOAULD XC7
jabadiagm
87.9 × 65.5 mm31 parts2LGPL-3.03Rc2014 microsbc
hyiger
101.6 × 50.8 mm9 parts2LNo license2CoCoTANG
lfantoniosi
69.1 × 56.6 mm108 parts2LNo license1RP2040/RP2350
Usbfloppy
cm68
233.4 × 154.9 mm11 parts2LNo license0ESP32
NextTRS
apuder
145.7 × 107.8 mm93 parts2LGPL-3.074Sombrero MSX Goa'uld X
jabadiagm
71.1 × 67.9 mm18 parts2LGPL-3.03TRS-IO-M3
apuder
134 × 74.2 mm40 parts2LGPL-3.074NXP
TeensyOpenLoop
neurorishika
111.1 × 86 mm21 parts2LMIT0TRS-IO-M1
apuder
118.8 × 94 mm36 parts2LGPL-3.074ESP32
TRSIO
apuder
93.3 × 80.6 mm33 parts2LGPL-3.074Lb-80
apuder
30.6 × 21 mm7 parts2LGPL-3.074
How designs wire the SN74LVC245AN
Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the SN74LVC245AN connects to, and the resistors, capacitors and other passives placed on it.
- The CE pin is tied to GND on 8 of 13 designs (a signal on 5).
- The A->B pin has a capacitor to GND on 6 of 14 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| A->Bpin 1 | Connected to: Signal 57% · 3.3V 43% |
|
| GNDpin 10 | Connected to: GND 86% | — |
| CEpin 19 | Connected to: GND 62% · a signal 38% | — |
| VCCpin 20 | Connected to: 3.3V 92% |
|
16 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include WonderTANG by lfantoniosi, Lb-80 by apuder, Stargate by leomanes and MSXhdmi tn20k by jabadiagm.
The SN74LVC245AN in open source designs
The gallery holds 20 open source boards using the SN74LVC245AN from 15 GitHub repositories; a typical one measures about 101.6 × 87.8 mm and carries around 30 components.
95% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is WonderTANG by lfantoniosi.
Parts used alongside the SN74LVC245AN
Microcontrollers on boards using the SN74LVC245AN
What boards using the SN74LVC245AN are built for
SN74LVC245AN: common questions
Where can I find a SN74LVC245AN reference design?
Each of the 20 boards on this page is a real design using the SN74LVC245AN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the SN74LVC245AN CE pin connected?
The CE pin is tied to GND on 8 of 13 designs (a signal on 5). Counted from the KiCad layouts of 14 open source designs using the SN74LVC245AN.
How is the SN74LVC245AN A->B pin connected?
The A->B pin has a capacitor to GND on 6 of 14 designs, most often 100 nF. Counted from the KiCad layouts of 14 open source designs using the SN74LVC245AN.
What parts are used alongside the SN74LVC245AN?
The Tang_Nano_20k, 74HC139, AMS1117-3.3 and Tang_nano_9K appear in the most repositories here.
Which microcontrollers do boards using the SN74LVC245AN use?
Most are built on ESP32 (2), RP2040/RP2350 (2), ESP8266 (1) and NXP (1).
How big is a typical board using the SN74LVC245AN?
The median is 101.6 × 87.8 mm, and 95% are two-layer designs.
What is the most popular open source board using the SN74LVC245AN?
By GitHub stars, WonderTANG by lfantoniosi, with 75 stars.
Can I simulate one of these boards using the SN74LVC245AN before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.