TRS-IO-M1
apuder·TRS-IO·kicad/m1/v1.2/TRS-IO-M1.kicad_pcb
About the TRS-IO-M1 PCB
TRS-IO-M1 is an open source PCB design by apuder, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 118.8 × 94 mm, with 36 components from 18 distinct parts.
Other key parts include the HiLetgo-ESP-32S, SN74LVC245AN, ATF16V8B-15PU, 74LVC245 and ATF22V10-PDIP. By type, the board carries 10 resistors, 9 ICs, 9 capacitors, 3 transistors, 3 connectors and 1 switch.
It belongs with the audio and power & battery designs in this gallery.
From the project
TRS-IO gives a TRS-80 Model 1/III online capabilities and provides access to a variety of services. TRS-IO currently features the following capabilities:
TRS-IO gives a TRS-80 Model 1/III online capabilities and provides access to a variety of services. TRS-IO currently features the following capabilities:
1. Access to the RetroStore 2. FreHD emulation 3. Access to files mounted on a SMB share or located on a micro-SD card 4. Access to remote servers via TCP 5. Virtual printer support
The TRS-IO versions for the Model 1 and Model III have some additional features that are explained below. The following sections give an overview of TRS-IO as well as setup instructions. This Github repository contains the complete source code as well as the…

Main components on the TRS-IO-M1
TRS-IO-M1 bill of materials (BOM)
36 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | HiLetgo-ESP-32S | DIP-38_W22.9mm | U1 |
| 1 | SN74LVC245AN AS6C62256-PDIP | DIP-28_W15.24mm | U2 |
| 1 | ATF16V8B-15PU MCP23S17_SP | DIP-28_W7.62mm | U3 |
| 1 | SN74LVC245AN 74LVC245 | DIP-20_W7.62mm | U4 |
| 3 | 74LVC245 | DIP-20_W7.62mm | U5, U6, U7 |
| 1 | ATF22V10-PDIP | DIP-24_W7.62mm | U8 |
| 1 | ATF16V8-PDIP | DIP-20_W7.62mm | U9 |
| 3 | 2N7000-G 2N7000 | TO-92_Inline | Q1, Q2, Q3 |
| 1 | 302-S501 Conn_02x20_Odd_Even | PinHeader_2x20_P2.54mm_Vertical | J1 |
| 1 | Conn_02x20_Odd_Even | TRSEDGE | J2 |
| 1 | SD_Card | TFP09-2-12B | J3 |
| 1 | 1825910-6 SW_Push | SW_PUSH_6mm_H9.5mm | SW1 |
| 1 | HV-5RGB60 LED_RCBG | LED_D5.0mm-4_RGB | D1 |
| 4 | RDER71E104K0P1H03B 0.1uF | C_Disc_D3.0mm_W2.0mm_P2.50mm | C1, C2, C3, C4 |
| 5 | 0.1uF | C_Disc_D3.0mm_W2.0mm_P2.50mm | C5, C6, C7, C8, C9 |
| 3 | 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3 |
| 1 | 4K7 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 6 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R6, R7, R8, R9, R10 |
TRS-IO-M1 design files
The KiCad project lives in the apuder/TRS-IO repository on GitHub; these links point at the commit this page was built from.
TRS-IO-M1: common questions
How big is the TRS-IO-M1 PCB?
The TRS-IO-M1 measures 118.8 × 94 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TRS-IO-M1?
36 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the TRS-IO-M1 design files?
From the apuder/TRS-IO repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the TRS-IO-M1 design in my own project?
Yes, under the terms of its GPL-3.0 license, which apuder chose for the repository.
More boards in TRS-IO
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kKLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k