4 open source boards using the ZLDO1117-33

Real designs built with the ZLDO1117-33, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The ZLDO1117-33 in open source designs

The gallery holds 4 open source boards using the ZLDO1117-33 from 3 GitHub repositories; a typical one measures about 60 × 69 mm and carries around 93 components.

50% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is Reworkctf by azonenberg.

Parts used alongside the ZLDO1117-33

Microcontrollers on boards using the ZLDO1117-33

What boards using the ZLDO1117-33 are built for

ZLDO1117-33: common questions

Where can I find a ZLDO1117-33 reference design?

Each of the 4 boards on this page is a real design using the ZLDO1117-33. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the ZLDO1117-33 use?

Most are built on STM32 (2) and FPGA (1).

How big is a typical board using the ZLDO1117-33?

The median is 60 × 69 mm, and 50% are two-layer designs.

What is the most popular open source board using the ZLDO1117-33?

By GitHub stars, Reworkctf by azonenberg, with 33 stars.

Can I simulate one of these boards using the ZLDO1117-33 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part