6 open source boards using the RCLAMP0514M
Real designs built with the RCLAMP0514M, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Mainboard
azonenberg
165 × 121 mm617 parts10LBSD-3-Clause7- schematic only · 191 partsSTM32
Ayrton
191 partsBSD-3-Clause4 
STM32Fpga stm32-ifaces
90 × 94.5 mm267 parts6LBSD-3-Clause17
STM32Baset1-media converter
100.5 × 62.5 mm173 parts4LBSD-3-Clause17
Usb hub eurocard
60 × 100 mm142 parts4LNo license124
Lpr rgmii phy
35 × 73.5 mm82 parts4LBSD-3-Clause17
The RCLAMP0514M in open source designs
The gallery holds 6 open source boards using the RCLAMP0514M from 4 GitHub repositories; a typical one measures about 90 × 94.5 mm and carries around 182 components.
100% use four copper layers or more, and 83% carry an open source license.
The most starred is Usb hub eurocard by azonenberg.
Parts used alongside the RCLAMP0514M
Microcontrollers on boards using the RCLAMP0514M
What boards using the RCLAMP0514M are built for
RCLAMP0514M: common questions
Where can I find a RCLAMP0514M reference design?
Each of the 6 boards on this page is a real design using the RCLAMP0514M. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the RCLAMP0514M?
The ECS-1612MV-250-CN, KSZ9031RN, AT24MAC402, S25FL128SAGBHIA10 and STM32H735-UFBGA176-25 appear in the most repositories here.
Which microcontrollers do boards using the RCLAMP0514M use?
Most are built on STM32 (4).
How big is a typical board using the RCLAMP0514M?
The median is 90 × 94.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the RCLAMP0514M?
By GitHub stars, Usb hub eurocard by azonenberg, with 124 stars.
Can I simulate one of these boards using the RCLAMP0514M before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.