13 open source boards using the KSZ9031RN
Real designs built with the KSZ9031RN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Hermes-Lite 2.0
softerhardware
100 × 100 mm488 parts4LNo license372FPGA
Gp4-hil
azonenberg
160 × 62 mm450 parts4LLGPL-3.0260STM32
Maxwell main
azonenberg
280 × 195 mm987 parts8LBSD-3-Clause193STM32
Main
azonenberg
130 × 90 mm435 parts10LBSD-3-Clause17STM32
Integralstick
azonenberg
87 × 59.8 mm266 parts4LBSD-3-Clause12STM32
Mainboard
azonenberg
165 × 121 mm617 parts10LBSD-3-Clause7- schematic only · 191 partsSTM32
Ayrton
azonenberg
191 partsBSD-3-Clause4 FPGA
Cat5-tdr
azonenberg
140 × 100 mm369 parts4LNo license124STM32
Switch engine
azonenberg
151 × 111 mm362 parts10LBSD-3-Clause35STM32
Fpga stm32-ifaces
azonenberg
90 × 94.5 mm267 parts6LBSD-3-Clause17STM32
Baset1-media converter
azonenberg
100.5 × 62.5 mm173 parts4LBSD-3-Clause17Ksz9031-eval
azonenberg
77 × 71.5 mm167 parts4LBSD-3-Clause17Lpr rgmii phy
azonenberg
35 × 73.5 mm82 parts4LBSD-3-Clause17
How designs wire the KSZ9031RN
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the KSZ9031RN connects to, and the resistors, capacitors and other passives placed on it.
- The AVDDH pins have a capacitor to GND on 9 of 9 designs, most often 470 nF (then 4.7 µF).
- The AVDDL pins have a capacitor to GND on 9 of 9 designs, most often 470 nF (then 4.7 µF).
- The RXD3/MODE3 pin has a series resistor on 9 of 9 designs, most often 33 Ω (then 10 kΩ).
- The RXD2/MODE2 pin has a series resistor on 9 of 9 designs, most often 33 Ω (then 10 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| AVDDHpin 1, 12 | Connected to: RCLAMP0514M 33% |
|
| AVDDLpin 4, 9 | Connected to: Signal 100% |
|
| DVDDLpin 14, 18, 23, 26, 30, 39 | Connected to: 1.2V 56% · a signal 44% |
|
| LED2/PHYAD1pin 15 | Connected to: A connector 67%, the microcontroller 22% |
|
| DVDDHpin 16, 34, 40 | Connected to: 1.8V 89% |
|
| LED1/PHYAD0pin 17 | Connected to: A connector 67%, the microcontroller 22% |
|
| RXD3/MODE3pin 27 | Connected to: Signal 100% |
|
| RXD2/MODE2pin 28 | Connected to: Signal 100% |
|
| VSSpin 29 | Connected to: GND 100% | — |
| RXD1/MODE1pin 31 | Connected to: Signal 100% |
|
| RXD0/MODE0pin 32 | Connected to: Signal 100% |
|
| RX_DV/CLK125_ENpin 33 | Connected to: Signal 100% |
|
| RX_CLK/PHYAD2pin 35 | Connected to: Signal 100% |
|
| MDIOpin 37 | Connected to: The microcontroller 56% |
|
| INT_Npin 38 | Connected to: Not connected 56% · a signal 44% |
|
| CLK125_NDO/LED_MODEpin 41 | Connected to: Signal 100% |
|
| LDO_Opin 43 | Connected to: Not connected 100% | — |
| AVDDL_PLLpin 44 | Connected to: Signal 100% |
|
| XOpin 45 | Connected to: Not connected 89% | — |
| XIpin 46 | Connected to: Signal 100% |
|
| NC/AVDDHpin 47 | Connected to: RCLAMP0514M 33% · not connected 44% |
|
| ISETpin 48 | Connected to: Signal 100% |
|
| PADpin PAD | Connected to: GND 100% | — |
17 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hermes-Lite 2.0 by softerhardware, Gp4-hil by azonenberg, Maxwell main by azonenberg and Cat5-tdr by azonenberg.
The KSZ9031RN in open source designs
The gallery holds 13 open source boards using the KSZ9031RN from 10 GitHub repositories; a typical one measures about 115.3 × 92.3 mm and carries around 362 components.
100% use four copper layers or more, and 85% carry an open source license.
The most starred is Hermes-Lite 2.0 by softerhardware.
Parts used alongside the KSZ9031RN
What boards using the KSZ9031RN are built for
KSZ9031RN: common questions
Where can I find a KSZ9031RN reference design?
Each of the 13 boards on this page is a real design using the KSZ9031RN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the KSZ9031RN AVDDH pin connected?
The AVDDH pins have a capacitor to GND on 9 of 9 designs, most often 470 nF (then 4.7 µF). Counted from the KiCad layouts of 9 open source designs using the KSZ9031RN.
How is the KSZ9031RN AVDDL pin connected?
The AVDDL pins have a capacitor to GND on 9 of 9 designs, most often 470 nF (then 4.7 µF). Counted from the KiCad layouts of 9 open source designs using the KSZ9031RN.
What resistor goes on the KSZ9031RN RXD3/MODE3 pin?
The RXD3/MODE3 pin has a series resistor on 9 of 9 designs, most often 33 Ω (then 10 kΩ). Counted from the KiCad layouts of 9 open source designs using the KSZ9031RN.
What parts are used alongside the KSZ9031RN?
The ECS-1612MV-250-CN, LTC3374-QFN, AT24MAC402, RCLAMP0514M and STM32H735-UFBGA176-25 appear in the most repositories here.
Which microcontrollers do boards using the KSZ9031RN use?
Most are built on STM32 (8) and FPGA (3).
How big is a typical board using the KSZ9031RN?
The median is 115.3 × 92.3 mm, and 0% are two-layer designs.
What is the most popular open source board using the KSZ9031RN?
By GitHub stars, Hermes-Lite 2.0 by softerhardware, with 372 stars.
Can I simulate one of these boards using the KSZ9031RN before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.