13 open source boards using the TPS62162DSG

Real designs built with the TPS62162DSG, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

13 boardsClear filters|Most starred

How designs wire the TPS62162DSG

Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the TPS62162DSG connects to, and the resistors, capacitors and other passives placed on it.

  • The SW pin has a inductor on 12 of 12 designs, most often 2.2 µH (then 10 µH).
  • The VOS pin has a inductor on 10 of 12 designs, most often 2.2 µH (then 10 µH).
  • The VIN pin has a decoupling capacitor on 9 of 12 designs, most often 10 µF (then 100 nF).
  • The VOS pin has a decoupling capacitor on 8 of 12 designs, most often 22 µF (then 100 nF).
PGNDpin 1Connected to: GND 83%
VINpin 2Connected to: 5V 58% · a signal 42%
  • Decoupling capacitor on 75% · 10 µF (10), 100 nF (7), 22 µF (3)
ENpin 3Connected to: 5V 67% · a signal 33%
AGNDpin 4Connected to: GND 92%
FBpin 5Connected to: GND 67% · a signal 25%
VOSpin 6Connected to: 3.3V 83%
  • Inductor on 83% · 2.2 µH (9), 10 µH (1)
  • Decoupling capacitor on 67% · 22 µF (8), 100 nF (6)
SWpin 7Connected to: Signal 100%
  • Inductor on 100% · 2.2 µH (11), 10 µH (1)
PGpin 8Connected to: Signal 67% · not connected 33%
  • Pull-up to 3.3V on 58% · 100 kΩ (7)
PADpin 9Connected to: GND 83%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SlimeVR-Tracker-HW by xuan25, Monopoly-Electronic-V2 by Pegoku, BrailleCellDevelopementBoard by Charmander542 and Pump controller by nfranzwa.

The TPS62162DSG in open source designs

The gallery holds 13 open source boards using the TPS62162DSG from 12 GitHub repositories; a typical one measures about 59 × 59.5 mm and carries around 61 components.

69% use four copper layers or more, and 23% carry an open source license.

The most starred is SlimeVR-Tracker-HW by xuan25.

Parts used alongside the TPS62162DSG

Microcontrollers on boards using the TPS62162DSG

TPS62162DSG: common questions

Where can I find a TPS62162DSG reference design?

Each of the 13 boards on this page is a real design using the TPS62162DSG. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TPS62162DSG SW pin connected?

The SW pin has a inductor on 12 of 12 designs, most often 2.2 µH (then 10 µH). Counted from the KiCad layouts of 12 open source designs using the TPS62162DSG.

How is the TPS62162DSG VOS pin connected?

The VOS pin has a inductor on 10 of 12 designs, most often 2.2 µH (then 10 µH). Counted from the KiCad layouts of 12 open source designs using the TPS62162DSG.

What decoupling capacitors do designs use on the TPS62162DSG VIN pin?

The VIN pin has a decoupling capacitor on 9 of 12 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 12 open source designs using the TPS62162DSG.

Which microcontrollers do boards using the TPS62162DSG use?

Most are built on ESP32 (5), STM32 (4), Microchip SAM (2) and NXP (1).

How big is a typical board using the TPS62162DSG?

The median is 59 × 59.5 mm, and 31% are two-layer designs.

What is the most popular open source board using the TPS62162DSG?

By GitHub stars, SlimeVR-Tracker-HW by xuan25, with 5 stars.

Can I simulate one of these boards using the TPS62162DSG before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part