7 open source boards using the SN74LVC1G175DCK

Real designs built with the SN74LVC1G175DCK, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

The SN74LVC1G175DCK in open source designs

The gallery holds 7 open source boards using the SN74LVC1G175DCK from 4 GitHub repositories; a typical one measures about 151.9 × 69.2 mm and carries around 129 components.

57% use four copper layers or more, and 71% carry an open source license.

The most starred is 74Logic SA ADC by schilkp.

Parts used alongside the SN74LVC1G175DCK

Microcontrollers on boards using the SN74LVC1G175DCK

What boards using the SN74LVC1G175DCK are built for

SN74LVC1G175DCK: common questions

Where can I find a SN74LVC1G175DCK reference design?

Each of the 7 boards on this page is a real design using the SN74LVC1G175DCK. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the SN74LVC1G175DCK?

The AP2112K-3.3, AP7361C-3.3V and CH340C appear in the most repositories here.

Which microcontrollers do boards using the SN74LVC1G175DCK use?

Most are built on ESP32 (4).

How big is a typical board using the SN74LVC1G175DCK?

The median is 151.9 × 69.2 mm, and 43% are two-layer designs.

What is the most popular open source board using the SN74LVC1G175DCK?

By GitHub stars, 74Logic SA ADC by schilkp, with 9 stars.

Can I simulate one of these boards using the SN74LVC1G175DCK before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part