4mix

bread-modular·bread-modular·modules/4mix/4mix.kicad_pcb

4mix PCB layout, top view — open source board by bread-modular

About the 4mix PCB

4mix is an open source PCB design by bread-modular, published on GitHub under the MIT license. It is a 4-layer board measuring 91.4 × 68.6 mm, with 167 components from 22 distinct parts.

Other key parts include the MCP6002-XSN. By type, the board carries 94 resistors, 35 capacitors, 11 ICs, 4 connectors and 4 diodes.

It belongs with the audio designs in this gallery.

From the project

Modular Synths for Everyone

Modular Design: Just like Eurorack USB-Powered: It can be portable Minimal Design: Cost Effective Modular MIDI Support: Use MIDI to communicate between modules (still supports CV & Gate) Analog and Digital Signal Paths: It’s your choice Diverse Built-in Modules: Includes a wide range of pre-designed modules Configurable Digital Modules: Supports both voice and CV (uses AtTiny 1616 or ESP32) Fully Open Source: Including schematics, PCB designs, and code Ease of Customization: Enables straightforward creation of custom modules tailored to specific needs. No Case Required: Can be used directly…

4mix, from the project README
From the project README

Main components on the 4mix

4mix bill of materials (BOM)

167 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
11
MCP6002-XSN
MCP6002-xSN
U1, U2, U3, U4, U5, U6, U7, U8 +3
2
CONN_01X05_PIN
Conn_01x05_Pin
GND1, GND2
2
Conn_01x05_Pin
V_SUPPLY1, V_SUPPLY2
2
CONN_01X05_SOCKET
Conn_01x05_Socket
INPUT1, OUTPUT1
16
50K
50k
RV1, RV2, RV3, RV4, RV5, RV6, RV7, RV8 +8
1
500K
500k
RV17
3
SS14
D1, D2, D3
1
SS210
D4
2
100PF
100pf
C1, C2
12
47PF
47pf
C3, C4, C5, C6, C7, C8, C9, C10 +4
16
0.1UF
0.1uf
C11, C12, C13, C14, C15, C17, C18, C20 +8
1
100UF
100uf
C16
4
10UF
10uf
C19, C23, C27, C31
9
1M
R1, R6, R7, R19, R20, R38, R51, R64 +1
38
56K
56k
R2, R5, R8, R11, R14, R15, R16, R17 +30
4
10K
10k
R3, R4, R35, R36
33
100
R10, R12, R13, R27, R28, R40, R42, R43 +25
4
1k
R26, R92, R94, R95
2
330
R33, R34
1
10
R37
Show 2 more
QtyPartRefs
2
100K
100k
R90, R91
1
51K
51k
R93

4mix design files

The KiCad project lives in the bread-modular/bread-modular repository on GitHub; these links point at the commit this page was built from.

4mix: common questions

How big is the 4mix PCB?

The 4mix measures 91.4 × 68.6 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the 4mix?

167 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the 4mix design files?

From the bread-modular/bread-modular repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the 4mix design in my own project?

Yes, under the terms of its MIT license, which bread-modular chose for the repository.

More boards in bread-modular

Similar boards