32bit
bread-modular·bread-modular·modules/32bit/32bit.kicad_pcb
About the 32bit PCB
32bit is an open source ESP32 PCB design by bread-modular, published on GitHub under the MIT license. It is a 4-layer board measuring 30.5 × 68.6 mm, with 62 components from 25 distinct parts.
Its main chip is the ESP32-S3-WROOM-1U-N16R8, from the ESP32 family. Other key parts include the MCP6002-XSN. By type, the board carries 25 capacitors, 22 resistors, 3 ICs, 3 connectors, 3 switches and 1 diode.
It belongs with the audio designs in this gallery.
From the project
Modular Synths for Everyone
Modular Design: Just like Eurorack USB-Powered: It can be portable Minimal Design: Cost Effective Modular MIDI Support: Use MIDI to communicate between modules (still supports CV & Gate) Analog and Digital Signal Paths: It’s your choice Diverse Built-in Modules: Includes a wide range of pre-designed modules Configurable Digital Modules: Supports both voice and CV (uses AtTiny 1616 or ESP32) Fully Open Source: Including schematics, PCB designs, and code Ease of Customization: Enables straightforward creation of custom modules tailored to specific needs. No Case Required: Can be used directly…

Main components on the 32bit
32bit bill of materials (BOM)
62 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1U-N16R8 | ESP32-S3-WROOM-1U | U1 |
| 1 | MCP6002-XSN MCP6002-xSN | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U3 |
| 1 | ~ | QFN-28-1EP_4x4mm_P0.45mm_EP2.4x2.4mm_ThermalVias | U4 |
| 1 | CONN_01X05_PIN Conn_01x05_Pin | Power_Connector | GND1 |
| 1 | USB_C_RECEPTACLE_USB2.0_14P USB_C_Receptacle_USB2.0_14P | HRO-TYPE-C-31-M-12 | J5 |
| 1 | Conn_01x05_Pin | Power_Connector | V_SUPPLY1 |
| 2 | CONN_01X05_SOCKET Conn_01x05_Socket | PinSocket_1x05_P2.54mm_Vertical | INPUT1, OUTPUT1 |
| 2 | 50K 50k | Potentiometer_RV09 | RV1, RV2 |
| 3 | K2-1808SN-A4SW-01 | K2-1808SN-A4SW-01 | SW1, SW2, SW4 |
| 1 | LED | LED_0603_1608Metric | D1 |
| 1 | GZ2012D121TF | C_0805_2012Metric | FB1 |
| 9 | 0.1UF 0.1uf | C_0402_1005Metric | C1, C4, C6, C21, C22, C26, C34, C36 +1 |
| 2 | 10UF 10uf | C_0603_1608Metric | C2, C8 |
| 1 | 1UF 1uf | C_0402_1005Metric | C3 |
| 6 | 10UF 10uf | C_0402_1005Metric | C5, C27, C33, C35, C37, C38 |
| 6 | 100UF 100uf | C_1206_3216Metric | C7, C9, C10, C11, C12, C13 |
| 1 | 10NF 10nf | C_0805_2012Metric | C20 |
| 5 | 1k | R_0402_1005Metric | R1, R2, R9, R13, R17 |
| 1 | 10K 10k | R_0402_1005Metric | R3 |
| 2 | 5.1K 5.1k | R_0603_1608Metric | R4, R11 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1.5K 1.5k | R_0402_1005Metric | R5, R6 |
| 5 | 33 | R_0402_1005Metric | R7, R8, R14, R18, R26 |
| 4 | 100K 100k | R_0402_1005Metric | R10, R12, R16, R19 |
| 1 | 10 | R_0603_1608Metric | R15 |
| 2 | 4.7K 4.7k | R_0402_1005Metric | R24, R25 |
32bit design files
The KiCad project lives in the bread-modular/bread-modular repository on GitHub; these links point at the commit this page was built from.
32bit: common questions
What microcontroller does the 32bit use?
The 32bit is built around the ESP32-S3-WROOM-1U-N16R8, from the ESP32 family.
How big is the 32bit PCB?
The 32bit measures 30.5 × 68.6 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the 32bit?
62 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 32bit design files?
From the bread-modular/bread-modular repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 32bit design in my own project?
Yes, under the terms of its MIT license, which bread-modular chose for the repository.
Can I test firmware for the 32bit without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in bread-modular
4mix
bread-modular
91.4 × 68.6 mm167 parts4LMIT67Base
bread-modular
223.5 × 160 mm163 parts2LMIT67AVR/Arduino
Midi
bread-modular
30.5 × 68.6 mm62 parts2LMIT67Imix
bread-modular
30.5 × 68.6 mm58 parts4LMIT67RP2040/RP2350
16bit
bread-modular
30.5 × 68.6 mm58 parts2LMIT67AVR/Arduino
Hihat
bread-modular
30.5 × 68.6 mm52 parts2LMIT67Kick
bread-modular
30.5 × 68.6 mm35 parts4LMIT67Svf
bread-modular
30.5 × 68.6 mm34 parts2LMIT67AVR/Arduino
Env
bread-modular
30.5 × 68.6 mm29 parts2LMIT67AVR/Arduino
Mcc
bread-modular
30.5 × 68.6 mm22 parts2LMIT67
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k