Base
bread-modular·bread-modular·modules/base/base.kicad_pcb
About the Base PCB
Base is an open source PCB design by bread-modular, published on GitHub under the MIT license. It is a 2-layer board measuring 223.5 × 160 mm, with 163 components from 38 distinct parts.
Other key parts include the MCP6002T-I/SN, AP2112K-3.3TRG1 and TPS2111APWR. By type, the board carries 47 capacitors, 47 resistors, 41 connectors, 16 ICs, 3 diodes and 2 fuses.
It belongs with the audio designs in this gallery.
From the project
Modular Synths for Everyone
Modular Design: Just like Eurorack USB-Powered: It can be portable Minimal Design: Cost Effective Modular MIDI Support: Use MIDI to communicate between modules (still supports CV & Gate) Analog and Digital Signal Paths: It’s your choice Diverse Built-in Modules: Includes a wide range of pre-designed modules Configurable Digital Modules: Supports both voice and CV (uses AtTiny 1616 or ESP32) Fully Open Source: Including schematics, PCB designs, and code Ease of Customization: Enables straightforward creation of custom modules tailored to specific needs. No Case Required: Can be used directly…

Main components on the Base
Base bill of materials (BOM)
163 components, 38 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | MCP6002T-I/SN MCP6002-xSN Microchip | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U2, U3, U4 |
| 1 | AP2112K-3.3TRG1 AP2112K-3.3 Diodes | SOT-23-5 | U5 |
| 12 | TPS2111APWR | TSSOP-8_4.4x3mm_P0.65mm | U6, U7, U8, U9, U10, U11, U12, U13 +4 |
| 24 | PZ254-1-05-Z-8.5 Conn_01x05_Socket Huacan | Power_Connector | GND1, GND2, GND3, GND4, GND5, GND6, GND7, GND8 +16 |
| 1 | WQP-PJ366ST LineOut QingPu | Jack_3.5mm_QingPu_WQP-PJ366ST_Vertical | J1 |
| 2 | WQP-PJ366ST Ground QingPu | Jack_3.5mm_QingPu_WQP-PJ366ST_Vertical | J2, J4 |
| 1 | TYPE-C-31-M-12 USB_C_Receptacle_PowerOnly_6P HRO | HRO-TYPE-C-31-M-12 | J5 |
| 1 | WQP-PJ366ST HeadphoneOut QingPu | Jack_3.5mm_QingPu_WQP-PJ366ST_Vertical | J6 |
| 12 | PZ200-1-02-Z Conn_01x02 | PinHeader_1x02_P2.00mm_Vertical | J7, J8, J9, J10, J11, J12, J13, J14 +4 |
| 1 | PZ254-2-05-Z-8.5 Conn_02x05_Socket Huacan | PinSocket_2x05_P2.54mm_Vertical | 5V14 |
| 1 | BSMD1812-200-16V | Fuse_1812_4532Metric | F1 |
| 1 | MF-MSMF110/16-2 | Fuse_1812_4532Metric | F2 |
| 1 | PZ254-1-05-Z-8.5 Conn_01x05_Socket Huacan | PinSocket_1x05_P2.54mm_Vertical | INPUT1 |
| 2 | RV09-50K 50k hand-solder | Potentiometer_RV09 | RV1, RV2 |
| 1 | K2-1808SN-A4SW-01 Korean Hroparts | K2-1808SN-A4SW-01 | SW1 |
| 1 | KT-0603R LED Harvatek | LED_0603_1608Metric | D1 |
| 2 | SMAJ5.0A/TR13 SMAJ5.0A | D_SMA | D2, D3 |
| 2 | PZ2012D800-3R0TF Chilisin | C_0805_2012Metric | FB1, FB2 |
| 16 | CL05B104KO5NNNC 0.1uf | C_0402_1005Metric | C1, C15, C21, C23, C25, C27, C29, C31 +8 |
| 1 | CL21B105KBFNNNE 1uf Samsung | C_0805_2012Metric | C2 |
Show 18 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 10 | CL31A107MQHNNNE 100uf Samsung | C_1206_3216Metric | C3, C7, C8, C9, C10, C11, C12, C13 +2 |
| 1 | CL21A475KAQNNNE 4.7uf Samsung | C_0805_2012Metric | C4 |
| 1 | CL21B103KB6WPNC 10nf Samsung | C_0805_2012Metric | C5 |
| 2 | CL31A226KOHNNNE 22uf Samsung | C_1206_3216Metric | C6, C17 |
| 1 | CL05B224KO5NNNC 220nf Samsung | C_0402_1005Metric | C16 |
| 2 | CL10A475KP8NNNC 4.7uf Samsung | C_0603_1608Metric | C18, C19 |
| 12 | CL05A105KA5NQNC 1uf | C_0402_1005Metric | C22, C24, C26, C28, C30, C32, C34, C36 +4 |
| 1 | EMK325ABJ107MM-T 100uf | C_1210_3225Metric | C46 |
| 5 | 0402WGF1001TCE 1k UNI-ROYAL | R_0402_1005Metric | R1, R14, R15, R20, R21 |
| 2 | 0603WAF5101T5E 5.1k UNI-ROYAL | R_0603_1608Metric | R2, R3 |
| 17 | 0402WGF1003TCE 100k UNI-ROYAL | R_0402_1005Metric | R4, R6, R7, R8, R9, R29, R31, R33 +9 |
| 3 | 0402WGF1004TCE 1M UNI-ROYAL | R_0402_1005Metric | R5, R16, R17 |
| 2 | 1206W4F100JT5E 10 UNI-ROYAL | R_1206_3216Metric | R10, R12 |
| 2 | 0603WAF3303T5E 330k UNI-ROYAL | R_0603_1608Metric | R18, R19 |
| 2 | 0402WGF1002TCE 10k UNI-ROYAL | R_0402_1005Metric | R24, R25 |
| 1 | 0402WGF1000TCE 100 UNI-ROYAL | R_0402_1005Metric | R26 |
| 1 | 0402WGF3301TCE 3.3k UNI-ROYAL | R_0402_1005Metric | R27 |
| 12 | 0402WGF7500TCE 750 | R_0402_1005Metric | R28, R30, R32, R34, R36, R38, R40, R42 +4 |
Base design files
The KiCad project lives in the bread-modular/bread-modular repository on GitHub; these links point at the commit this page was built from.
Base: common questions
How big is the Base PCB?
The Base measures 223.5 × 160 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Base?
163 components, from 38 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Base design files?
From the bread-modular/bread-modular repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Base design in my own project?
Yes, under the terms of its MIT license, which bread-modular chose for the repository.
More boards in bread-modular
4mix
bread-modular
91.4 × 68.6 mm167 parts4LMIT67AVR/Arduino
Midi
bread-modular
30.5 × 68.6 mm62 parts2LMIT67ESP32
32bit
bread-modular
30.5 × 68.6 mm62 parts4LMIT67Imix
bread-modular
30.5 × 68.6 mm58 parts4LMIT67RP2040/RP2350
16bit
bread-modular
30.5 × 68.6 mm58 parts2LMIT67AVR/Arduino
Hihat
bread-modular
30.5 × 68.6 mm52 parts2LMIT67Kick
bread-modular
30.5 × 68.6 mm35 parts4LMIT67Svf
bread-modular
30.5 × 68.6 mm34 parts2LMIT67AVR/Arduino
Env
bread-modular
30.5 × 68.6 mm29 parts2LMIT67AVR/Arduino
Mcc
bread-modular
30.5 × 68.6 mm22 parts2LMIT67
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kUSB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956ButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687