Kick
bread-modular·bread-modular·modules/kick/kick.kicad_pcb
About the Kick PCB
Kick is an open source PCB design by bread-modular, published on GitHub under the MIT license. It is a 4-layer board measuring 30.5 × 68.6 mm, with 35 components from 16 distinct parts.
Other key parts include the MCP6002-XSN and VTL5C. By type, the board carries 16 resistors, 7 capacitors, 4 ICs and 2 connectors.
It belongs with the audio designs in this gallery.
From the project
Modular Synths for Everyone
Modular Design: Just like Eurorack USB-Powered: It can be portable Minimal Design: Cost Effective Modular MIDI Support: Use MIDI to communicate between modules (still supports CV & Gate) Analog and Digital Signal Paths: It’s your choice Diverse Built-in Modules: Includes a wide range of pre-designed modules Configurable Digital Modules: Supports both voice and CV (uses AtTiny 1616 or ESP32) Fully Open Source: Including schematics, PCB designs, and code Ease of Customization: Enables straightforward creation of custom modules tailored to specific needs. No Case Required: Can be used directly…

Main components on the Kick
Kick bill of materials (BOM)
35 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | MCP6002-XSN MCP6002-xSN | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U1, U2, U3 |
| 1 | VTL5C | VTL5C | U4 |
| 1 | CONN_01X05_PIN Conn_01x05_Pin | Power_Connector | GND1 |
| 1 | Conn_01x05_Pin | Power_Connector | V_SUPPLY1 |
| 2 | CONN_01X05_SOCKET Conn_01x05_Socket | PinSocket_1x05_P2.54mm_Vertical | INPUT1, OUTPUT1 |
| 1 | 50K 50k | Potentiometer_RV09 | RV1 |
| 3 | 1M | Potentiometer_RV09 | RV2, RV3, RV4 |
| 5 | 100NF 100nf | C_0402_1005Metric | C1, C2, C3, C4, C5 |
| 2 | 10NF 10nf | C_0402_1005Metric | C6, C7 |
| 2 | 51K 51k | R_0402_1005Metric | R1, R16 |
| 4 | 1k | R_0402_1005Metric | R2, R3, R5, R7 |
| 3 | 100K 100k | R_0402_1005Metric | R4, R11, R12 |
| 2 | 1M | R_0402_1005Metric | R6, R8 |
| 1 | 4.7K 4.7k | R_0402_1005Metric | R9 |
| 3 | 200K 200k | R_0402_1005Metric | R10, R13, R15 |
| 1 | 10K 10k | R_0402_1005Metric | R14 |
Kick design files
The KiCad project lives in the bread-modular/bread-modular repository on GitHub; these links point at the commit this page was built from.
Kick: common questions
How big is the Kick PCB?
The Kick measures 30.5 × 68.6 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Kick?
35 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Kick design files?
From the bread-modular/bread-modular repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Kick design in my own project?
Yes, under the terms of its MIT license, which bread-modular chose for the repository.
More boards in bread-modular
4mix
bread-modular
91.4 × 68.6 mm167 parts4LMIT67Base
bread-modular
223.5 × 160 mm163 parts2LMIT67AVR/Arduino
Midi
bread-modular
30.5 × 68.6 mm62 parts2LMIT67ESP32
32bit
bread-modular
30.5 × 68.6 mm62 parts4LMIT67Imix
bread-modular
30.5 × 68.6 mm58 parts4LMIT67RP2040/RP2350
16bit
bread-modular
30.5 × 68.6 mm58 parts2LMIT67AVR/Arduino
Hihat
bread-modular
30.5 × 68.6 mm52 parts2LMIT67Svf
bread-modular
30.5 × 68.6 mm34 parts2LMIT67AVR/Arduino
Env
bread-modular
30.5 × 68.6 mm29 parts2LMIT67AVR/Arduino
Mcc
bread-modular
30.5 × 68.6 mm22 parts2LMIT67
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kUSB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956ButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687