Hihat
bread-modular·bread-modular·modules/hihat/hihat.kicad_pcb
About the Hihat PCB
Hihat is an open source AVR/Arduino PCB design by bread-modular, published on GitHub under the MIT license. It is a 2-layer board measuring 30.5 × 68.6 mm, with 52 components from 26 distinct parts.
Its main chip is the ATTINY1616-M, from the AVR/Arduino family. Other key parts include the VTL5C and MCP6002-XSN. By type, the board carries 27 resistors, 9 capacitors, 5 ICs, 4 diodes and 2 connectors.
It belongs with the audio designs in this gallery.
From the project
Modular Synths for Everyone
Modular Design: Just like Eurorack USB-Powered: It can be portable Minimal Design: Cost Effective Modular MIDI Support: Use MIDI to communicate between modules (still supports CV & Gate) Analog and Digital Signal Paths: It’s your choice Diverse Built-in Modules: Includes a wide range of pre-designed modules Configurable Digital Modules: Supports both voice and CV (uses AtTiny 1616 or ESP32) Fully Open Source: Including schematics, PCB designs, and code Ease of Customization: Enables straightforward creation of custom modules tailored to specific needs. No Case Required: Can be used directly…

Main components on the Hihat
Hihat bill of materials (BOM)
52 components, 26 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | VTL5C | VTL5C | U1 |
| 3 | MCP6002-XSN MCP6002-xSN | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U2, U3, U4 |
| 1 | ATTINY1616-M ATtiny1616-M | VQFN-20-1EP_3x3mm_P0.4mm_EP1.7x1.7mm | U5 |
| 1 | CONN_01X05_PIN Conn_01x05_Pin | Power_Connector | GND1 |
| 1 | Conn_01x05_Pin | Power_Connector | V_SUPPLY1 |
| 2 | CONN_01X05_SOCKET Conn_01x05_Socket | PinSocket_1x05_P2.54mm_Vertical | INPUT1, OUTPUT1 |
| 2 | 50K 50k | Potentiometer_RV09 | RV1, RV2 |
| 1 | Conn_01x05_Pin | Conn_Holes_2 | V_SUPPLY2 |
| 2 | SS8050 | SOT-23 | D1, D3 |
| 1 | SS14 | D_SMA | D2 |
| 1 | SS8550 | SOT-23 | D4 |
| 1 | 100PF 100pf | C_0402_1005Metric | C1 |
| 2 | 1NF 1nf | C_0402_1005Metric | C2, C3 |
| 2 | 0.1UF 0.1uf | C_0402_1005Metric | C4, C5 |
| 1 | 47UF 47uf | C_0805_2012Metric | C6 |
| 1 | 10NF 10nf | C_0402_1005Metric | C7 |
| 1 | 4.7UF 4.7uf | C_0603_1608Metric | C8 |
| 1 | 100UF 100uf | C_1206_3216Metric | C9 |
| 5 | 330 | R_0402_1005Metric | R1, R5, R6, R12, R15 |
| 6 | 100K 100k | R_0402_1005Metric | R2, R13, R17, R18, R21, R24 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 1k | R_0402_1005Metric | R3, R7, R8, R11, R25 |
| 2 | 200K 200k | R_0402_1005Metric | R4, R20 |
| 2 | 22K 22k | R_0402_1005Metric | R9, R14 |
| 4 | 10K 10k | R_0402_1005Metric | R10, R16, R19, R27 |
| 2 | 1M | R_0402_1005Metric | R22, R23 |
| 1 | 4.7K 4.7k | R_0402_1005Metric | R26 |
Hihat design files
The KiCad project lives in the bread-modular/bread-modular repository on GitHub; these links point at the commit this page was built from.
Hihat: common questions
What microcontroller does the Hihat use?
The Hihat is built around the ATTINY1616-M, from the AVR/Arduino family.
How big is the Hihat PCB?
The Hihat measures 30.5 × 68.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hihat?
52 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Hihat design files?
From the bread-modular/bread-modular repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Hihat design in my own project?
Yes, under the terms of its MIT license, which bread-modular chose for the repository.
Can I test firmware for the Hihat without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in bread-modular
4mix
bread-modular
91.4 × 68.6 mm167 parts4LMIT67Base
bread-modular
223.5 × 160 mm163 parts2LMIT67AVR/Arduino
Midi
bread-modular
30.5 × 68.6 mm62 parts2LMIT67ESP32
32bit
bread-modular
30.5 × 68.6 mm62 parts4LMIT67Imix
bread-modular
30.5 × 68.6 mm58 parts4LMIT67RP2040/RP2350
16bit
bread-modular
30.5 × 68.6 mm58 parts2LMIT67Kick
bread-modular
30.5 × 68.6 mm35 parts4LMIT67Svf
bread-modular
30.5 × 68.6 mm34 parts2LMIT67AVR/Arduino
Env
bread-modular
30.5 × 68.6 mm29 parts2LMIT67AVR/Arduino
Mcc
bread-modular
30.5 × 68.6 mm22 parts2LMIT67
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k