26 open source boards using the MAX4466EXK

Real designs built with the MAX4466EXK, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

26 boardsClear filters|Most starred

How designs wire the MAX4466EXK

Read from the KiCad layouts of 25 open source designs, one per repository: what each pin of the MAX4466EXK connects to, and the resistors, capacitors and other passives placed on it.

  • The IN+ pin has a series capacitor on 25 of 25 designs, most often 10 nF (then 10 µF).
  • The IN+ pin has a pull-up to 3.3V on 24 of 25 designs, most often 1 MΩ (then 10 kΩ).
  • The IN- pin has a series capacitor on 24 of 25 designs, most often 100 nF (then 100 pF).
  • The IN- pin has a series resistor on 24 of 25 designs, most often 100 kΩ (then 10 kΩ).
IN+pin 1Connected to: Signal 100%
  • Series capacitor on 100% · 10 nF (22), 10 µF (2)
  • Pull-up to 3.3V on 96% · 1 MΩ (23), 10 kΩ (2)
  • Resistor to GND on 92% · 1 MΩ (21), 10 kΩ (2)
GNDpin 2Connected to: GND 100%
IN-pin 3Connected to: Signal 96%
  • Series capacitor on 96% · 100 nF (13), 100 pF (9)
  • Series resistor on 96% · 100 kΩ (19), 10 kΩ (18), 22 kΩ (5)
OUTpin 4Connected to: The microcontroller 96%
  • Series capacitor on 92% · 100 nF (13), 100 pF (8)
  • Series resistor on 88% · 100 kΩ (19)
VCCpin 5Connected to: 3.3V 100%
  • Decoupling capacitor on 92% · 100 nF (20)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESP32 BASED PCB-KiCAD by BitwiseAjeet, Esp32-iot-4layer pcb by ODARI-CHARLES1, ESP32 PCB LAYOUT AJEET by rompasaurus and ESP32 IoT Dev Board by EngMeesh.

The MAX4466EXK in open source designs

The gallery holds 26 open source boards using the MAX4466EXK from 25 GitHub repositories; a typical one measures about 87 × 55 mm and carries around 81 components.

96% use four copper layers or more, and 27% carry an open source license.

The most starred is ESP32 BASED PCB-KiCAD by BitwiseAjeet.

Microcontrollers on boards using the MAX4466EXK

MAX4466EXK: common questions

Where can I find a MAX4466EXK reference design?

Each of the 26 boards on this page is a real design using the MAX4466EXK. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the MAX4466EXK IN+ pin connected?

The IN+ pin has a series capacitor on 25 of 25 designs, most often 10 nF (then 10 µF). Counted from the KiCad layouts of 25 open source designs using the MAX4466EXK.

How is the MAX4466EXK IN- pin connected?

The IN- pin has a series capacitor on 24 of 25 designs, most often 100 nF (then 100 pF). Counted from the KiCad layouts of 25 open source designs using the MAX4466EXK.

How is the MAX4466EXK OUT pin connected?

The OUT pin has a series capacitor on 23 of 25 designs, most often 100 nF (then 100 pF). Counted from the KiCad layouts of 25 open source designs using the MAX4466EXK.

What parts are used alongside the MAX4466EXK?

The BME280, USBLC6-2SC6, ESP32-C3-WROOM-02-H4, CP2102N-Axx-xQFN20 and W25Q32JVSSIQ appear in the most repositories here.

Which microcontrollers do boards using the MAX4466EXK use?

Most are built on ESP32 (25).

How big is a typical board using the MAX4466EXK?

The median is 87 × 55 mm, and 4% are two-layer designs.

What is the most popular open source board using the MAX4466EXK?

By GitHub stars, ESP32 BASED PCB-KiCAD by BitwiseAjeet, with 6 stars.

Can I simulate one of these boards using the MAX4466EXK before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part