7 open source boards using the 79L05
Real designs built with the 79L05, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Hardmpu wt
PickledDog
106.1 × 95.4 mm46 parts2LApache-2.0303458A-A3-66533-2021-KS-RoHS-SMD
EleDes
213 × 136 mm399 parts4LCC0-1.0816bit pwm dac board
oldrev
80 × 50 mm54 parts2LNo license1CVMod8 V2 Main
Thorinair
100.8 × 108.6 mm161 parts2LCC-BY-SA-4.025VCA
ukmaker
100 × 80 mm35 parts2LNo license1Oscilloscopio
ciaa
85.7 × 137.2 mm58 parts2LNo license15CVMod8 V2 Main THT
Thorinair
100.8 × 85 mm63 parts2LCC-BY-SA-4.025
How designs wire the 79L05
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 79L05 connects to, and the resistors, capacitors and other passives placed on it.
- The VO pin has a decoupling capacitor on 4 of 5 designs, most often 1 µF (then 100 nF).
- The VI pin has a decoupling capacitor on 3 of 5 designs, most often 470 nF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VIpin 2 | Connected to: -12V 40% · GND 20% · a signal 40% |
|
| VOpin 3 | Connected to: -5V 60% · a signal 40% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hardmpu wt by PickledDog, CVMod4 Main by Thorinair, Oscilloscopio by ciaa and 3458A-A3-66533-2021-KS-RoHS-SMD-KiCad by EleDes.
The 79L05 in open source designs
The gallery holds 7 open source boards using the 79L05 from 6 GitHub repositories; a typical one measures about 100.8 × 95.4 mm and carries around 58 components.
86% are two-layer designs, the rest use four layers or more, and 57% carry an open source license.
The most starred is Hardmpu wt by PickledDog.
Parts used alongside the 79L05
Microcontrollers on boards using the 79L05
What boards using the 79L05 are built for
79L05: common questions
Where can I find a 79L05 reference design?
Each of the 7 boards on this page is a real design using the 79L05. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 79L05 VO pin?
The VO pin has a decoupling capacitor on 4 of 5 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 6 open source designs using the 79L05.
What decoupling capacitors do designs use on the 79L05 VI pin?
The VI pin has a decoupling capacitor on 3 of 5 designs, most often 470 nF (then 100 nF). Counted from the KiCad layouts of 6 open source designs using the 79L05.
Which microcontrollers do boards using the 79L05 use?
Most are built on AVR/Arduino (1).
How big is a typical board using the 79L05?
The median is 100.8 × 95.4 mm, and 86% are two-layer designs.
What is the most popular open source board using the 79L05?
By GitHub stars, Hardmpu wt by PickledDog, with 30 stars.
Can I simulate one of these boards using the 79L05 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.