Replicookie
About the Replicookie PCB
Replicookie is an open source PCB design by cmcquinn, published on GitHub under the CERN-OHL-S-2.0 license. It is a 6-layer board measuring 184.2 × 127 mm, with 173 components from 57 distinct parts.
Other key parts include the DS1307ZN+, 93LCxxBxxOT, FT4232H, MIC23050-4YML and KSZ9031RNXCA. By type, the board carries 73 capacitors, 38 connectors, 32 resistors, 13 ICs, 7 inductors and 2 crystals.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
A 3D printer controller board based around the Snickerdoodle development board.
KiCad design files for Replicookie, a 3D Printer driver board based around the Snickerdoodle development board.
This project is open-source hardware, licensed under the CERN 1.2 license.
Main components on the Replicookie
Replicookie bill of materials (BOM)
173 components, 57 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DS1307ZN+ | SOIC-8_3.9x4.9mm_P1.27mm | U201 |
| 1 | 93LCxxBxxOT | SOT-23-6 | U301 |
| 1 | FT4232H | LQFP-64_10x10mm_P0.5mm | U302 |
| 1 | MIC23050-4YML | Micrel_MLF-8-1EP_2x2mm_P0.5mm_EP0.8x1.3mm_ThermalVias | U401 |
| 1 | KSZ9031RNXCA | QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm | U402 |
| 1 | ASDMB-25.000MHz | Oscillator_SMD_Abracon_ASDMB-4Pin_2.5x2.0mm | U403 |
| 1 | 74LVC2G07 | SOT-23-6 | U404 |
| 1 | ASDMB-24.000MHz-C | Oscillator_SMD_Abracon_ASDMB-4Pin_2.5x2.0mm | U501 |
| 1 | ASDMB-26.000MHz-C | Oscillator_SMD_Abracon_ASDMB-4Pin_2.5x2.0mm | U502 |
| 1 | USB3343 | QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U503 |
| 1 | 74LVC1G07 | SOT-553 | U504 |
| 1 | USB2514B_Bi | QFN-36-1EP_6x6mm_P0.5mm_EP3.7x3.7mm | U505 |
| 1 | TCA9800 | VSSOP-8_3.0x3.0mm_P0.65mm | U601 |
| 1 | ASE-xxxMHz | Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | X201 |
| 1 | ABM8-12.000MHZ-20 | Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | Y301 |
| 1 | TFM-115-01-F-D-A | Samtec_TFM-115-01-F-D-A_2x15_P1.27mm_Horizontal | J2 |
| 1 | TFM-120-01-F-D-A | Samtec_TFM-120-01-F-D-A_2x20_P1.27mm_Horizontal | J3 |
| 1 | USB_B_Micro | USB_Micro-B_Molex_47346-0001 | J301 |
| 1 | JK0654219 | RJ45_Pulse_JK0654219NL_Horizontal | J401 |
| 2 | USB_A_Stacked | USB_A_Wuerth_61400826021_Horizontal_Stacked | J501, J502 |
Show 37 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 16 | Conn_01x08_Female | PinSocket_1x08_P2.54mm_Vertical | J801, J804, J901, J904, J1001, J1004, J1101, J1104 +8 |
| 8 | Screw_Terminal_01x04 | TerminalBlock_Phoenix_MPT-0,5-4-2.54_1x04_P2.54mm_Horizontal | J802, J902, J1002, J1102, J1202, J1302, J1402, J1502 |
| 8 | Conn_02x03_Odd_Even | PinHeader_2x03_P2.54mm_Vertical | J803, J903, J1003, J1103, J1203, J1303, J1403, J1503 |
| 1 | MountingHole | Snickerdoodle_Mounting_Hole | H601 |
| 5 | TFM-120-01-F-D-A | Samtec_TFM-120-01-F-D-A_2x20_P1.27mm_Horizontal | JA1, JA2, JB1, JB2, JC1 |
| 2 | 1N4148WT | D_SOD-523 | D401, D402 |
| 5 | BLM18PG121SN1D 120 ohms Murata Electronics | L_0603_1608Metric | FB301, FB302, FB401, FB402, FB403 |
| 1 | 120 ohms | L_0603_1608Metric | FB501 |
| 1 | MLP2016S1R0MT0S1 1uH TDK | L_0805_2012Metric | L401 |
| 11 | 0.01u | C_0402_1005Metric | C201, C501, C502, C510, C511, C512, C513, C514 +3 |
| 2 | 27p | C_0402_1005Metric | C301, C303 |
| 26 | 0.1u | C_0402_1005Metric | C302, C307, C308, C309, C310, C311, C312, C313 +18 |
| 5 | 4.7u | C_0402_1005Metric | C304, C305, C508, C509, C518 |
| 1 | 3.3u | C_0402_1005Metric | C306 |
| 2 | 4.7u | C_0603_1608Metric | C401, C403 |
| 1 | 560p | C_0402_1005Metric | C402 |
| 2 | CL10A106KP8NNNC 10u Samsung Electro-Mechanics | C_0603_1608Metric | C404, C425 |
| 3 | CL05A106MQ5NUNC 10u Samsung Electro-Mechanics | C_0402_1005Metric | C405, C406, C412 |
| 1 | 0.01u | C_0603_1608Metric | C422 |
| 7 | 0.1u | C_0603_1608Metric | C423, C426, C427, C428, C429, C601, C602 |
| 1 | 10u | C_0402_1005Metric | C424 |
| 2 | 1u | C_0402_1005Metric | C503, C506 |
| 1 | 150u | CP_Elec_3x5.3 | C507 |
| 8 | 100u 35V | CP_Elec_5x3 | C801, C901, C1001, C1101, C1201, C1301, C1401, C1501 |
| 2 | 2k | R_0603_1608Metric | R201, R202 |
| 15 | 10k | R_0402_1005Metric | R301, R302, R304, R401, R407, R504, R505, R801 +7 |
| 1 | 2k | R_0402_1005Metric | R303 |
| 2 | 12k | R_0402_1005Metric | R305, R506 |
| 3 | 1k | R_0402_1005Metric | R306, R403, R405 |
| 1 | 470 | R_0402_1005Metric | R307 |
| 1 | 4.7k | R_0402_1005Metric | R402 |
| 1 | 1.5k | R_0402_1005Metric | R404 |
| 1 | 12.1k | R_0402_1005Metric | R406 |
| 2 | 75 | R_0402_1005Metric | R408, R409 |
| 1 | 0 | R_0402_1005Metric | R501 |
| 1 | 8.06k 1% | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R502 |
| 1 | 10k 1/16W | R_0402_1005Metric | R503 |
Replicookie design files
The KiCad project lives in the cmcquinn/replicookie repository on GitHub; these links point at the commit this page was built from.
- Layoutreplicookie.kicad_pcb
- Schematicreplicookie.kicad_sch
Replicookie: common questions
How big is the Replicookie PCB?
The Replicookie measures 184.2 × 127 mm, has 6 copper layers and is 1.65 mm thick.
How many components are on the Replicookie?
173 components, from 57 distinct parts. The full bill of materials is listed on this page.
Where can I download the Replicookie design files?
From the cmcquinn/replicookie repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Replicookie design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which cmcquinn chose for the repository.
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979