14 open source boards using the MIC23050-4YML
Real designs built with the MIC23050-4YML, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Riscboy
Wren6991
70.3 × 102.1 mm106 parts2LNo license511FPGA
2019-07-06 11:52:16 fpga hat
Wren6991
65 × 56.5 mm87 parts4LApache-2.031Replicookie
cmcquinn
184.2 × 127 mm173 parts6LCERN-OHL-S-2.01FPGA
2019-07-06 12:26:53 fpga hat
Wren6991
65 × 56.5 mm87 parts4LApache-2.031FPGA
2019-07-06 12:29:23 fpga hat
Wren6991
65 × 56.5 mm87 parts4LApache-2.031FPGA
2019-07-07 17:06:08 fpga hat
Wren6991
65 × 56.5 mm87 parts4LApache-2.031FPGA
2019-07-07 17:06:09 fpga hat
Wren6991
65 × 56.5 mm87 parts4LApache-2.031FPGA
2019-07-07 17:15:58 fpga hat
Wren6991
65 × 56.5 mm87 parts4LApache-2.031FPGA
2019-07-07 17:33:00 fpga hat
Wren6991
65 × 56.5 mm87 parts4LApache-2.031FPGA
2019-07-07 17:33:20 fpga hat
Wren6991
65 × 56.5 mm87 parts4LApache-2.031FPGA
2019-07-07 18:07:42 fpga hat
Wren6991
65 × 56.5 mm87 parts4LApache-2.031FPGA
2019-07-07 18:08:38 fpga hat
Wren6991
65 × 56.5 mm87 parts4LApache-2.031FPGA
2019-07-07 18:25:46 fpga hat
Wren6991
65 × 56.5 mm87 parts4LApache-2.031FPGA
Fpga hat
Wren6991
65 × 56.5 mm87 parts4LApache-2.031
The MIC23050-4YML in open source designs
The gallery holds 14 open source boards using the MIC23050-4YML from 3 GitHub repositories; a typical one measures about 65 × 56.5 mm and carries around 87 components.
93% use four copper layers or more, and 93% carry an open source license.
The most starred is Riscboy by Wren6991.
Parts used alongside the MIC23050-4YML
Microcontrollers on boards using the MIC23050-4YML
What boards using the MIC23050-4YML are built for
MIC23050-4YML: common questions
Where can I find a MIC23050-4YML reference design?
Each of the 14 boards on this page is a real design using the MIC23050-4YML. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MIC23050-4YML use?
Most are built on FPGA (12) and RP2040/RP2350 (1).
How big is a typical board using the MIC23050-4YML?
The median is 65 × 56.5 mm, and 7% are two-layer designs.
What is the most popular open source board using the MIC23050-4YML?
By GitHub stars, Riscboy by Wren6991, with 511 stars.
Can I simulate one of these boards using the MIC23050-4YML before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.