11 open source boards using the ATtiny45
Real designs built with the ATtiny45, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Foundation
odeliy
48 × 110 mm123 parts2LNo license37AVR/Arduino
Paradox
odeliy
38 × 110 mm114 parts2LNo license37AVR/Arduino
CONTROL SYSTEMS MODULE
CodapopKSP
13 × 14 mm94 parts2LGPL-3.037AVR/Arduino
ACTION MODULE
CodapopKSP
13 × 14 mm88 parts2LGPL-3.037AVR/Arduino
3xVCA
odeliy
28 × 110 mm85 parts2LNo license37AVR/Arduino
VCF
odeliy
28 × 110 mm72 parts2LNo license37AVR/Arduino
EXECUTIVE ACTIONS (GROUPS/CONTROL) MODULE
CodapopKSP
20 × 20 mm60 parts2LGPL-3.037AVR/Arduino
EVA MODULE
CodapopKSP
13 × 14 mm57 parts2LGPL-3.037AVR/Arduino
UTILITY (NAVIGATION) MODULE
CodapopKSP
28 × 28 mm55 parts2LGPL-3.037AVR/Arduino
UTILITY TIME MODULE
CodapopKSP
13 × 14 mm53 parts2LGPL-3.037AVR/Arduino
CAMERA MODULE
CodapopKSP
13 × 14 mm46 parts2LGPL-3.037
The ATtiny45 in open source designs
The gallery holds 11 open source boards using the ATtiny45 from 2 GitHub repositories; a typical one measures about 20 × 20 mm and carries around 72 components.
100% are two-layer designs, the rest use four layers or more, and 64% carry an open source license.
The most starred is Foundation by odeliy.
Microcontrollers on boards using the ATtiny45
ATtiny45: common questions
Where can I find a ATtiny45 reference design?
Each of the 11 boards on this page is a real design using the ATtiny45. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ATtiny45 use?
Most are built on AVR/Arduino (11).
How big is a typical board using the ATtiny45?
The median is 20 × 20 mm, and 100% are two-layer designs.
What is the most popular open source board using the ATtiny45?
By GitHub stars, Foundation by odeliy, with 37 stars.
Can I simulate one of these boards using the ATtiny45 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.