Voidboard

dark-Phoenix2077·voidboard·voidboard PCB/devboard.kicad_pcb

Voidboard PCB layout, top view — open source ESP32 board by dark-Phoenix2077

About the Voidboard PCB

Voidboard is an open source ESP32 PCB design by dark-Phoenix2077, published on GitHub. It is a 2-layer board measuring 30 × 65 mm, with 41 components from 25 distinct parts.

Its main chip is the ESP32-S3-MINI-1, from the ESP32 family. Other key parts include the ME6211C33M5, TP4056-42-ESOP8, DW01A, MAX17048G+T10 and LSM6DSOXTR. By type, the board carries 14 resistors, 10 capacitors, 6 ICs, 4 connectors, 3 diodes and 2 transistors.

It belongs with the sensors, dev boards & breakouts and power & battery designs in this gallery.

From the project

custom esp32 devboard with extensive power management and a built-in IMU

I needed devboards for some of my projects that would benefit from extensive power management, and rlly wanted to make the starter project but it was too expensive, so I decided to completely overhaul it and make my own from scratch, in the process creating this.

it is a devboard based on the esp32-s3 wroom mini 1, a module containing the s3 SoC as well as flash, a clock and an antenna (routing the antenna was the only reason I didnt go with a bare SoC and the rest of the components). I added extensive PD, including a usb c port for PD and data, an in-built battery connector with different…

Voidboard, from the project README
From the project README

Main components on the Voidboard

Voidboard bill of materials (BOM)

41 components, 25 distinct parts.

QtyPartRefs
1
ME6211C33M5
U1
1
TP4056-42-ESOP8
U2
1
DW01A
U3
1
MAX17048G+T10
U4
1
LSM6DSOXTR
U7
1
ESP32-S3-MINI-1
U8
1
SI2301
Q1
1
FS8205A
Q2
1
USB_C_Receptacle_USB2.0_14P
J1
2
Conn_01x20
J2, J3
1
Conn_01x02
J5
2
SW_Push
SW1, SW2
1
LED_WHITE_0603
D1
1
BAT54S
D2
1
PRTR5V0U2X
D3
2
1uF
C13, C15
5
100nF
C14, C16, C19, C36, C37
2
10uF
C17, C18
1
0.1uF
C30
2
5.1K
R1, R2
Show 5 more
QtyPartRefs
5
10k
R3, R4, R12, R13, R14
2
1k
R8, R17
2
100k
R9, R10
1
2k
R11
2
4.7k
R15, R16

Voidboard design files

The KiCad project lives in the dark-Phoenix2077/voidboard repository on GitHub; these links point at the commit this page was built from.

Voidboard: common questions

What microcontroller does the Voidboard use?

The Voidboard is built around the ESP32-S3-MINI-1, from the ESP32 family.

How big is the Voidboard PCB?

The Voidboard measures 30 × 65 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Voidboard?

41 components, from 25 distinct parts. The full bill of materials is listed on this page.

Where can I download the Voidboard design files?

From the dark-Phoenix2077/voidboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Voidboard design in my own project?

The repository has no license, so all rights stay with dark-Phoenix2077. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Voidboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards