SmartSpin2k
doudar·SS2k-Hardware·Hardware/V3 - Integrated PCB/PCB/SS2K_KiCad_Files/SmartSpin2k.kicad_pcb
About the SmartSpin2k PCB
SmartSpin2k is an open source ESP32 PCB design by doudar, published on GitHub. It is a 2-layer board measuring 57.2 × 60.3 mm, with 79 components from 49 distinct parts.
Its main chip is the ESP32-WROOM-32D, from the ESP32 family. Other key parts include the TMC2209-LA-T, MAX3232, TPS5430DDA, CP2102-GMR and LM1117-3.3. By type, the board carries 32 capacitors, 24 resistors, 7 ICs, 6 diodes, 4 connectors and 3 switches.
From the project
Hardware Files For SmartSpin2k
Main components on the SmartSpin2k
SmartSpin2k bill of materials (BOM)
79 components, 49 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32D | ESP32-WROOM-32 | U1 |
| 1 | TMC2209-LA-T | QFN-28-1EP_5x5mm_P0.5mm_EP3.75x3.75mm | U2 |
| 1 | MAX3232 | MAX3232IPWR | U3 |
| 1 | TPS5430DDA | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.514x3.2mm | U4 |
| 1 | CP2102-GMR INTERFACE-CP2102-GMR(QFN28) | QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U5 |
| 1 | LM1117-3.3 | SOT-223-3_TabPin2 | U6 |
| 1 | SRV05-4 | SOT-23-6 | U7 |
| 2 | S8050 | SOT-23 | Q1, Q2 |
| 2 | B4B-XH-AMLFSN | JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical | J1, J2 |
| 1 | B8B-XH-A_LFSN | JST_XH_B8B-XH-AM_1x08_P2.50mm_Vertical | J3 |
| 1 | 10118194-0001LF Amphenol ICC (FCI) | USB_Micro_B_Female_10118194-0001LF | J4 |
| 1 | EG1218 | SW_SPDT_CK-JS102011SAQN | S1 |
| 2 | SW_Push | SW_Push_SPST_NO_Alps_SKRK | SW1, SW2 |
| 4 | LED_Small | LED_0603_1608Metric | D1, D2, D3, D9 |
| 2 | D_Schottky | D_SMA | D7, D8 |
| 1 | L_Iron | L_12x12mm_H8mm | L1 |
| 1 | 10uF(50V) | C_0805_2012Metric | C1 |
| 3 | 0.1uF(10%) | C_0402_1005Metric | C2, C13, C15 |
| 1 | 10uF(50V) | C_1206_3216Metric | C3 |
| 3 | 100nF(50V) | C_0805_2012Metric | C4, C5, C14 |
Show 29 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 22nF(50V) | C_0805_2012Metric | C6 |
| 2 | 100uF(50V) | CP_Elec_8x10 | C7, C19 |
| 1 | 4.7uF(6V3) | C_0805_2012Metric | C8 |
| 1 | 1uF(50V) | C_0603_1608Metric | C9 |
| 2 | 1UF 1uF | C_0603_1608Metric | C10, C11 |
| 1 | 100nF(10V) | C_0805_2012Metric | C12 |
| 1 | 2.2UF 2.2uF | C_0402_1005Metric | C16 |
| 7 | 0.1UF 0.1uF | C_0402_1005Metric | C17, C20, C21, C22, C23, C27, C29 |
| 1 | 4.7uF(50V) | C_1206_3216Metric | C18 |
| 1 | 4.7UF 4.7uF | C_0805_2012Metric | C24 |
| 1 | 1.0UF 1.0uF | C_0805_2012Metric | C25 |
| 1 | 150PF 150pF | C_0805_2012Metric | C26 |
| 1 | 0.01UF 0.01uF | C_0805_2012Metric | C28 |
| 1 | 100UF 100uF | C_1206_3216Metric | C30 |
| 1 | 1.5NF 1.5nF | C_0805_2012Metric | C31 |
| 1 | 10UF 10uF | C_0603_1608Metric | C32 |
| 3 | 0(5%) | R_0402_1005Metric | R1, R4, R5 |
| 1 | 1M | R_0402_1005Metric | R2 |
| 5 | 10K 10k | R_0402_1005Metric | R3, R7, R8, R22, R23 |
| 1 | 1k | R_0402_1005Metric | R6 |
| 4 | 330 | R_0402_1005Metric | R9, R12, R13, R24 |
| 2 | 200 | R_0402_1005Metric | R10, R11 |
| 1 | 100K 100k | R_0402_1005Metric | R14 |
| 2 | 80M 80m | R_1206_3216Metric | R15, R16 |
| 1 | 20K 20k | R_0805_2012Metric | R17 |
| 1 | 22K 22k | R_0402_1005Metric | R18 |
| 1 | 549 | R_0402_1005Metric | R19 |
| 1 | 5.9K 5.9k | R_0603_1608Metric | R20 |
| 1 | 4.7K 4.7k | R_0402_1005Metric | R21 |
SmartSpin2k design files
The KiCad project lives in the doudar/SS2k-Hardware repository on GitHub; these links point at the commit this page was built from.
SmartSpin2k: common questions
What microcontroller does the SmartSpin2k use?
The SmartSpin2k is built around the ESP32-WROOM-32D, from the ESP32 family.
How big is the SmartSpin2k PCB?
The SmartSpin2k measures 57.2 × 60.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SmartSpin2k?
79 components, from 49 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SmartSpin2k design files?
From the doudar/SS2k-Hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the SmartSpin2k design in my own project?
The repository has no license, so all rights stay with doudar. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the SmartSpin2k without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in SS2k-Hardware
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k