15 open source boards using the TMC2209-LA-T
Real designs built with the TMC2209-LA-T, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
SmartSpin2k
doudar
57.2 × 60.3 mm79 parts2LGPL-2.0291STM32
GBB15
skuep
67 × 15 mm72 parts4LMIT51STM32
MotionModuleSTM32R8
griffotron
187.9 × 60.2 mm240 parts4LMIT13ESP32
Firestarter
hstarmans
88.4 × 63.6 mm120 parts4LCC-BY-NC-4.09VehiclePowerDistributionSystem
RockSat-X
70 × 70 mm64 parts4LMIT3Stepper driver
janelia-kicad
42 × 42 mm35 parts4LBSD-3-Clause3ESP32
SmartSpin2k
doudar
57.2 × 60.3 mm79 parts2LNo license2STM32
Harpia
todio1155
93.6 × 93.8 mm182 parts6LCERN-OHL-S-2.01- schematic only · 164 partsESP32
OPNhydro
cvonk
164 parts2LGPL-3.01 STM32
XYmatics-E64
XyrusB2010
191.3 × 97.8 mm277 parts2LNo license0STM32
Factory in a box
klaus-liebler
188 × 65 mm264 parts4LNo license0STM32
Autotrainer Pellet Module
Mouse-GYM
114.3 × 108 mm140 parts4LNo license0ESP32
SmartSpin2k Panelized
doudar
189.5 × 204.9 mm79 parts2LGPL-2.0291ESP32
Homectrl rB
jeevan9s
85.2 × 84.7 mm108 parts4LNo license2ESP32
SmartSpin2k Panelized
doudar
189.5 × 204.9 mm79 parts2LNo license2
How designs wire the TMC2209-LA-T
Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the TMC2209-LA-T connects to, and the resistors, capacitors and other passives placed on it.
- The CPO pin has a series capacitor on 12 of 12 designs, most often 22 nF (then 10 nF).
- The CPI pin has a series capacitor on 12 of 12 designs, most often 22 nF (then 10 nF).
- The 5VOUT pin has a capacitor to GND on 11 of 12 designs, most often 4.7 µF (then 2.2 µF).
- The BRA pin has a resistor to GND on 11 of 12 designs, most often 110 mΩ (then 80 mΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| ENNpin 2 | Connected to: The microcontroller 67%, TMC2209-LA-T 25% · not connected 17% |
|
| GNDpin 3, 18, 29 | Connected to: GND 92% | — |
| CPOpin 4 | Connected to: Signal 100% |
|
| CPIpin 5 | Connected to: Signal 100% |
|
| VCPpin 6 | Connected to: Signal 83% · 12V 17% |
|
| SPREADpin 7 | Connected to: Not connected 83% | — |
| 5VOUTpin 8 | Connected to: Signal 75% · 5V 25% |
|
| DIAGpin 11 | Connected to: Not connected 75% · a signal 25% | — |
| INDEXpin 12 | Connected to: Not connected 92% | — |
| CLKpin 13 | Connected to: GND 92% | — |
| PDN_UARTpin 14 | Connected to: The microcontroller 67%, TMC2209-LA-T 42% |
|
| VCC_IOpin 15 | Connected to: 3.3V 92% |
|
| VSpin 22, 28 | Connected to: 12V 67% · a signal 33% |
|
| BRApin 23 | Connected to: Signal 100% |
|
| NCpin 25 | Connected to: Not connected 75% · GND 25% | — |
| BRBpin 27 | Connected to: Signal 100% |
|
10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SmartSpin2k by doudar, GBB15 by skuep, MotionModuleSTM32R8 by griffotron and Firestarter by hstarmans.
The TMC2209-LA-T in open source designs
The gallery holds 15 open source boards using the TMC2209-LA-T from 13 GitHub repositories; a typical one measures about 91 × 67.5 mm and carries around 108 components.
60% use four copper layers or more, and 53% carry an open source license.
The most starred is SmartSpin2k Panelized by doudar.
Parts used alongside the TMC2209-LA-T
What boards using the TMC2209-LA-T are built for
TMC2209-LA-T: common questions
Where can I find a TMC2209-LA-T reference design?
Each of the 15 boards on this page is a real design using the TMC2209-LA-T. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TMC2209-LA-T CPO pin connected?
The CPO pin has a series capacitor on 12 of 12 designs, most often 22 nF (then 10 nF). Counted from the KiCad layouts of 12 open source designs using the TMC2209-LA-T.
How is the TMC2209-LA-T CPI pin connected?
The CPI pin has a series capacitor on 12 of 12 designs, most often 22 nF (then 10 nF). Counted from the KiCad layouts of 12 open source designs using the TMC2209-LA-T.
How is the TMC2209-LA-T 5VOUT pin connected?
The 5VOUT pin has a capacitor to GND on 11 of 12 designs, most often 4.7 µF (then 2.2 µF). Counted from the KiCad layouts of 12 open source designs using the TMC2209-LA-T.
What parts are used alongside the TMC2209-LA-T?
The AMS1117-3.3, CP2102-GMR, ESP32-WROOM-32D, LM1117-3.3 and MAX3232 appear in the most repositories here.
Which microcontrollers do boards using the TMC2209-LA-T use?
Most are built on ESP32 (7) and STM32 (6).
How big is a typical board using the TMC2209-LA-T?
The median is 91 × 67.5 mm, and 40% are two-layer designs.
What is the most popular open source board using the TMC2209-LA-T?
By GitHub stars, SmartSpin2k Panelized by doudar, with 291 stars.
Can I simulate one of these boards using the TMC2209-LA-T before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.