Shutter
eddyem·stm32samples·F1:F103/shutter/kicad/shutter.kicad_pcb
About the Shutter PCB
Shutter is an open source STM32 PCB design by eddyem, published on GitHub. It is a 2-layer board measuring 61 × 49.5 mm, with 40 components from 29 distinct parts.
Its main chip is the STM32F303CBT6, from the STM32 family. Other key parts include the BME280 and ISO1050DUB. By type, the board carries 10 capacitors, 10 resistors, 9 connectors, 5 diodes, 3 ICs and 1 transistor.
It belongs with the sensors designs in this gallery.
From the project
Code samples and ready projects based on bare-metal STM32
Works with bi-stable shutter. You can find the device in /dev/shutterX (symlink to /dev/ttyUSBX).
After powered on, the device will try to close shutter (during one second).
The CCD (or manual) controlled input allows to open/close shutter by changing its level (depending on ccdactive parameter). If current configuration can't open or close the shutter immediately, it will be opened/closed as soon as possible, while the input holds its level.
Main components on the Shutter
Shutter bill of materials (BOM)
40 components, 29 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BME280 LM1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | STM32F303CBT6 STM32F103C6Tx | LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | ISO1050DUB USBLC6-2SC6 | SOT-23-6_Handsoldering | U3 |
| 1 | B0505S-1W DTA114Y | SOT-323_SC-70_Handsoldering | Q1 |
| 1 | 8MHZ NX5032GA-8MHz | Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | shutter | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | power | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J2 |
| 1 | SWD | PinHeader_1x06_P1.27mm_Vertical | J3 |
| 1 | 5v | PinHeader_1x01_P2.54mm_Vertical | J4 |
| 1 | GND | PinHeader_1x01_P2.54mm_Vertical | J5 |
| 1 | 3v3 | PinHeader_1x01_P2.54mm_Vertical | J6 |
| 1 | USB_B | USB_B_Lumberg_2411_02_Horizontal | J7 |
| 1 | hall | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J8 |
| 1 | RS-485 ccd | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J9 |
| 1 | TLE5205 | TO-220-7_P2.54x3.8mm_StaggerEven_Lead5.85mm_TabDown | DA1 |
| 5 | 1N5819 | D_SOD-323_HandSoldering | D1, D2, D3, D4, D5 |
| 1 | 0.1 2200u, 40V | CP_Radial_D17.0mm_P7.50mm | C1 |
| 1 | 0.1 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 2 | 0.1 | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C5 |
| 1 | 0.1 47u | CP_EIA-6032-28_Kemet-C_Pad2.25x2.35mm_HandSolder | C4 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 0.1 | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C7, C8 |
| 2 | 6 | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C10 |
| 1 | 10K 6.9 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 4K7 56k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 3 | 330 4k7 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R5, R6 |
| 1 | 330 300 II | R_Axial_Power_L20.0mm_W6.4mm_P22.40mm | R4 |
| 1 | 330 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 2 | 330 22 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R9 |
| 1 | 330 1k5 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
Shutter design files
The KiCad project lives in the eddyem/stm32samples repository on GitHub; these links point at the commit this page was built from.
Shutter: common questions
What microcontroller does the Shutter use?
The Shutter is built around the STM32F303CBT6, from the STM32 family.
How big is the Shutter PCB?
The Shutter measures 61 × 49.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Shutter?
40 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Shutter design files?
From the eddyem/stm32samples repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Shutter design in my own project?
The repository has no license, so all rights stay with eddyem. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Shutter without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in stm32samples
STM32
Multistepper
eddyem
113.5 × 105.5 mm234 parts4LNo license208- schematic only · 234 partsSTM32
Fx3u 24mr
eddyem
234 parts2LNo license208 STM32
Nitrogen
eddyem
80 × 80 mm136 parts4LNo license208STM32
Many485
eddyem
80 × 84 mm107 parts2LNo license208STM32
Stm32
eddyem
98 × 63.5 mm98 parts2LNo license208STM32
Windshield
eddyem
66 × 54 mm86 parts2LNo license208STM32
Mainboard
eddyem
58 × 35 mm86 parts2LNo license208STM32
Chiller control
eddyem
62 × 60.5 mm69 parts2LNo license208STM32
Servo control
eddyem
53 × 47 mm59 parts2LNo license208STM32
Encoder
eddyem
78 × 81 mm53 parts2LNo license208STM32
Hall
eddyem
45.3 × 46.9 mm34 parts2LNo license208
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k