Fx3u 24mr
eddyem·stm32samples·F1:F103/FX3U/kicad/fx3u_24mr.kicad_pcb
About the Fx3u 24mr PCB
Fx3u 24mr is an open source STM32 PCB design by eddyem, published on GitHub. It is a 2-layer board, with 234 components from 97 distinct parts.
Its main chip is the BME280, from the STM32 family. Other key parts include the STM32F303CBT6, ISO1050DUB, 74HC4051, PC844 and LM2576HVS-5. By type, the board carries 103 resistors, 41 capacitors, 38 diodes, 25 ICs, 10 relays and 8 connectors.
It belongs with the sensors designs in this gallery.
From the project
Code samples and ready projects based on bare-metal STM32
A usefull thing made of chineese FX3U clone ===========================================
Works over RS-232 (default: 115200, 8N1), CAN (default: 250000 baud) or MODBUS-RTU (default: 9600, 8N1).
You can see pinout table in file hardware.c.
Values in parentheses after flags command is its bit number in whole uint32t. E.g. to reset flag "frelayinverted" you can call frelayinverted=0 or flags2=0`.
Main components on the Fx3u 24mr
Fx3u 24mr bill of materials (BOM)
234 components, 97 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BME280 STM32F103VCTx | LQFP-100_14x14mm_P0.5mm | U1 |
| 1 | STM32F303CBT6 EL817 | DIP-4_W7.62mm | U2 |
| 1 | ISO1050DUB ULN2003 | SOIC-16_3.9x9.9mm_P1.27mm | U3 |
| 1 | 74HC4051 ULN2003 | SOIC-16_3.9x9.9mm_P1.27mm | U4 |
| 1 | 74HC4051 XL1509-5.0 | SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 2 | PC844 EL817 | DIP-4_W7.62mm | U6, U7 |
| 1 | LM2576HVS-5 EL817 | DIP-4_W7.62mm | U8 |
| 1 | ADUM4160 EL817 | DIP-4_W7.62mm | U9 |
| 1 | USBLC6-2SC6 EL817 | DIP-4_W7.62mm | U10 |
| 1 | LM1117MP-3.3 EL817 | DIP-4_W7.62mm | U11 |
| 1 | IP4220CZ6 EL817 | DIP-4_W7.62mm | U12 |
| 1 | ISO3086 EL817 | DIP-4_W7.62mm | U13 |
| 1 | ISO3088DW EL817 | DIP-4_W7.62mm | U14 |
| 5 | EL817 | DIP-4_W7.62mm | U15, U16, U17, U18, U23 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U19 |
| 1 | SP3232 | SOIC-16_3.9x9.9mm_P1.27mm | U20 |
| 1 | BL3085 | SOIC-8_3.9x4.9mm_P1.27mm | U21 |
| 1 | ATMLH202-64DM | SOIC-8_3.9x4.9mm_P1.27mm | U22 |
| 1 | TJA1050 | SOIC-8_3.9x4.9mm_P1.27mm | U24 |
| 1 | LM358 | SO-8_3.9x4.9mm_P1.27mm | U25 |
Show 77 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 8MHZ 8MHz | Crystal_HC49-U_Vertical | Y1 |
| 1 | 32768 | Crystal_HC49-U_Vertical | Y2 |
| 1 | Prog | J1 | |
| 1 | DC | J2 | |
| 1 | 232 | DSUB-9_Female_Vertical_P2.77x2.84mm | J3 |
| 1 | RS485 | J4 | |
| 1 | CAN | J5 | |
| 1 | Xin | J6 | |
| 1 | Yout | J7 | |
| 1 | Analog | J8 | |
| 1 | CR1220 | BT1 | |
| 1 | 0.5A U110-TAER | F1 | |
| 1 | G5LE-1-5VDC HF46F | Relay_SPST_Omron_G5NB | K1 |
| 9 | HF46F | Relay_SPST_Omron_G5NB | K2, K3, K4, K5, K6, K7, K8, K9 +1 |
| 2 | 50K 10k | Potentiometer_Bourns_3386F_Vertical | RV1, RV2 |
| 1 | SW_DPDT_x2 | SW_CK_JS202011CQN_DPDT_Straight | SW3 |
| 17 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D3, D4, D5, D6, D7, D8, D25 +9 |
| 3 | M7 | D_SMA_Handsoldering | D2, D18, D19 |
| 1 | SMBJ30A LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D9 |
| 1 | PESD1CAN LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D10 |
| 1 | 1N5822 LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D11 |
| 2 | B340A LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D12, D13 |
| 2 | SM712_SOT23 LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D14, D15 |
| 1 | SS14 LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D16 |
| 1 | SM712_SOT23 Power | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D17 |
| 1 | SMBJ30A | D_SMB | D20 |
| 1 | SS24 | D_SMA_Handsoldering | D21 |
| 1 | SS14 | D_SMA_Handsoldering | D22 |
| 4 | SM6T6V8A | D_SMB | D23, D24, D37, D38 |
| 2 | schottky | D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D35, D36 |
| 1 | 100U JY_B32 | L1 | |
| 1 | 68 | L_10.4x10.4_H4.8 | L2 |
| 3 | 0.1 1000u | CP_Radial_D14.0mm_P7.50mm | C1, C2, C4 |
| 1 | 1000u | CP_Radial_D14.0mm_P7.50mm | C3 |
| 11 | 0.1 | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C10, C14, C17, C20, C21, C22, C23 +3 |
| 9 | 0.1 | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C8, C31, C32, C33, C34, C35, C39 +1 |
| 2 | 0.1 10u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C11 |
| 1 | 10u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9 |
| 1 | 100u | CP_EIA-3528-12_Kemet-T_Pad1.50x2.35mm_HandSolder | C12 |
| 5 | 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13, C15, C16, C18, C19 |
| 4 | 0.1 6? | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C26, C27, C28, C30 |
| 1 | SE-5R5-D105VYV3C 6? | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C29 |
| 2 | 0.1 10u | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C37, C38 |
| 1 | 10u | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C41 |
| 2 | 10K 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R53 |
| 1 | 4K7 510 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 3 | 330 4.7k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R57 |
| 2 | 330 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R9 |
| 5 | 330 4k7 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7, R8, R10, R11 |
| 1 | 4K7 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12 |
| 6 | 3K3 4k7 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13, R14, R16, R17, R19, R20 |
| 2 | 3K3 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15, R18 |
| 3 | 560 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R21, R24, R27 |
| 5 | 560 4k7 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R22, R25, R26, R28, R29 |
| 1 | 120 4k7 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R23 |
| 1 | 1K5 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R30 |
| 3 | 4k7 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R31, R32, R46 |
| 1 | 10M 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R33 |
| 4 | 7.5 4k7 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R34, R35, R37, R38 |
| 2 | 7.5 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R36, R39 |
| 1 | 91K 4k7 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R40 |
| 3 | 10K 4k7 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R41, R43, R44 |
| 1 | 10K 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R42 |
| 1 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R45 |
| 2 | 10K 510 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R47, R58 |
| 1 | 10K 4.7k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R48 |
| 2 | 110 4.7k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R49, R50 |
| 2 | 110 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R51, R52 |
| 1 | 0 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R54 |
| 1 | 10K 470 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R55 |
| 1 | 330 6.2k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R56 |
| 13 | 510 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R59, R60, R61, R62, R63, R64, R65, R66 +5 |
| 16 | 4.7k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R72, R73, R74, R75, R76, R77, R78, R79 +8 |
| 1 | 120 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R80 |
| 10 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R81, R82, R83, R84, R89, R91, R94, R96 +2 |
| 2 | 120 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R87, R88 |
| 3 | 499 | R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R93, R98, R101 |
Fx3u 24mr design files
The KiCad project lives in the eddyem/stm32samples repository on GitHub; these links point at the commit this page was built from.
Fx3u 24mr: common questions
What microcontroller does the Fx3u 24mr use?
The Fx3u 24mr is built around the BME280, from the STM32 family.
How big is the Fx3u 24mr PCB?
The Fx3u 24mr has 2 copper layers and is 1.6 mm thick.
How many components are on the Fx3u 24mr?
234 components, from 97 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Fx3u 24mr design files?
From the eddyem/stm32samples repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Fx3u 24mr design in my own project?
The repository has no license, so all rights stay with eddyem. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Fx3u 24mr without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in stm32samples
STM32
Multistepper
eddyem
113.5 × 105.5 mm234 parts4LNo license208STM32
Nitrogen
eddyem
80 × 80 mm136 parts4LNo license208STM32
Many485
eddyem
80 × 84 mm107 parts2LNo license208STM32
Stm32
eddyem
98 × 63.5 mm98 parts2LNo license208STM32
Windshield
eddyem
66 × 54 mm86 parts2LNo license208STM32
Mainboard
eddyem
58 × 35 mm86 parts2LNo license208STM32
Chiller control
eddyem
62 × 60.5 mm69 parts2LNo license208STM32
Servo control
eddyem
53 × 47 mm59 parts2LNo license208STM32
Encoder
eddyem
78 × 81 mm53 parts2LNo license208STM32
Shutter
eddyem
61 × 49.5 mm40 parts2LNo license208STM32
Hall
eddyem
45.3 × 46.9 mm34 parts2LNo license208
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k