Windshield
eddyem·stm32samples·F1:F103/CAR_CANbus/WindShield/kicad/windshield.kicad_pcb
About the Windshield PCB
Windshield is an open source STM32 PCB design by eddyem, published on GitHub. It is a 2-layer board measuring 66 × 54 mm, with 86 components from 71 distinct parts.
Its main chip is the STM32F303CBT6, from the STM32 family. Other key parts include the BME280, ISO1050DUB and 74HC4051. By type, the board carries 27 resistors, 13 diodes, 13 capacitors, 11 test points, 8 connectors and 6 transistors.
It belongs with the sensors designs in this gallery.
From the project
Code samples and ready projects based on bare-metal STM32
Manage windshields over CAN ===========================
To format pretty tables use markdown-table -5 -s"|" > Readme.md.
Main components on the Windshield
Windshield bill of materials (BOM)
86 components, 71 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BME280 XC6206PxxxMR | SOT-23-3 | U1 |
| 1 | STM32F303CBT6 MT1470 | SOT-23-6_Handsoldering | U2 |
| 1 | ISO1050DUB STM32F103C6Tx | LQFP-48_7x7mm_P0.5mm | U3 |
| 1 | 74HC4051 ZXCT1009 | SOT-23_Handsoldering | U4 |
| 1 | 74HC4051 TJA1050 | SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | B0505S-1W 2N7002 | SOT-23_Handsoldering | Q1 |
| 1 | B0509S-1W AOD4185 | TO-252-3_TabPin2 | Q2 |
| 1 | SI2308 IRLR7807 | TO-252-3_TabPin2 | Q3 |
| 1 | B2424S-2W AOD4185 | TO-252-3_TabPin2 | Q4 |
| 1 | B0505S-2W IRLR7807 | TO-252-3_TabPin2 | Q5 |
| 1 | SI2300 2N7002 | SOT-23_Handsoldering | Q6 |
| 1 | 8MHZ NX5032GA-8MHz | Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | Power | TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J1 |
| 1 | Hall | JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J2 |
| 1 | Buttons | JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J3 |
| 1 | UART | PinSocket_1x03_P2.54mm_Vertical | J4 |
| 1 | Prog | PinSocket_1x06_P1.27mm_Vertical | J5 |
| 1 | EXT_MOT | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J6 |
| 1 | Motor | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J7 |
| 1 | CAN | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J8 |
Show 51 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SOLDERJUMPER_2_OPEN Term | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | Gnd | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP1 |
| 1 | Ven | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP2 |
| 1 | 12V | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP3 |
| 1 | 24V 5V | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP4 |
| 1 | 3V3 | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP5 |
| 1 | 4.6V Gnd | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP6 |
| 1 | 3.3V Gnd | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP7 |
| 1 | L+ | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP8 |
| 1 | L- | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP9 |
| 1 | R+ | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP10 |
| 1 | R- | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP11 |
| 3 | 1N5819 | D_SOD-323_HandSoldering | D1, D2, D8 |
| 1 | SMBJ18A | D_SMB_Handsoldering | D3 |
| 2 | 1N4007 | D_SMA_Handsoldering | D4, D5 |
| 2 | MM3Z3V3 | D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D6, D7 |
| 1 | SMBJ30A 1N4007 | D_SMA_Handsoldering | D9 |
| 1 | PESD1CAN 1N4007 | D_SMA_Handsoldering | D10 |
| 1 | 1N5822 1N4007 | D_SMA_Handsoldering | D11 |
| 1 | B340A 1N4007 | D_SMA_Handsoldering | D12 |
| 1 | B340A PESD1CAN | SOT-23 | D13 |
| 1 | 100U 10u | cd43 | L1 |
| 3 | 0.1 | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C7, C11 |
| 1 | 0.1 10u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2 |
| 1 | 1u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3 |
| 1 | 0.1 47u | C_1206_3216Metric | C4 |
| 1 | 47u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5 |
| 1 | 0.1 22 | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 0.1 6 | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8 |
| 3 | 0.1 | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C12, C13 |
| 1 | 6 | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10 |
| 1 | 10K 300k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 4K7 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 330 47 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 4 | 330 100 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5, R8, R9 |
| 1 | 330 19k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 330 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | 330 6.8 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | 330 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11 |
| 1 | 4K7 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12 |
| 1 | 3K3 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13 |
| 1 | 3K3 330 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14 |
| 2 | 3K3 100 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15, R16 |
| 2 | 3K3 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R17, R19 |
| 1 | 3K3 220 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R18 |
| 1 | 3K3 0.05 | R_Box_L14.0mm_W5.0mm_P9.00mm | R20 |
| 1 | 560 120 | R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R21 |
| 3 | 560 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R22, R26, R27 |
| 1 | 120 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R23 |
| 1 | 560 220 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R24 |
| 1 | 560 100 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R25 |
Windshield design files
The KiCad project lives in the eddyem/stm32samples repository on GitHub; these links point at the commit this page was built from.
Windshield: common questions
What microcontroller does the Windshield use?
The Windshield is built around the STM32F303CBT6, from the STM32 family.
How big is the Windshield PCB?
The Windshield measures 66 × 54 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Windshield?
86 components, from 71 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Windshield design files?
From the eddyem/stm32samples repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Windshield design in my own project?
The repository has no license, so all rights stay with eddyem. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Windshield without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in stm32samples
STM32
Multistepper
eddyem
113.5 × 105.5 mm234 parts4LNo license208- schematic only · 234 partsSTM32
Fx3u 24mr
eddyem
234 parts2LNo license208 STM32
Nitrogen
eddyem
80 × 80 mm136 parts4LNo license208STM32
Many485
eddyem
80 × 84 mm107 parts2LNo license208STM32
Stm32
eddyem
98 × 63.5 mm98 parts2LNo license208STM32
Mainboard
eddyem
58 × 35 mm86 parts2LNo license208STM32
Chiller control
eddyem
62 × 60.5 mm69 parts2LNo license208STM32
Servo control
eddyem
53 × 47 mm59 parts2LNo license208STM32
Encoder
eddyem
78 × 81 mm53 parts2LNo license208STM32
Shutter
eddyem
61 × 49.5 mm40 parts2LNo license208STM32
Hall
eddyem
45.3 × 46.9 mm34 parts2LNo license208
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k